3D Anode Microbial Fuel Cell Characterization and Monitoring Coupling X-Ray Tomography and Electrochemical Impedance Spectroscopy
Source abstract
Abstract
Entangled stainless steel single wire was used as a promising 3D anode for Microbial Fuel Cells (MFCs). Two complementary techniques were coupled to precisely characterize the anode structure and activity: X-Ray Computed Tomography (XRCT) and Electrochemical Impedance Spectroscopy (EIS). XRCT provides an acurate estimation of the pore distribution and size while EIS allows to check and monitor the electrochemical activity. Electrochemical measurements were performed with activated sludges and synthetic medium at an imposed potential of −0.2 V vs Ag/AgCl in a single chamber MFC. Modified Transmission Line Model was used to follow the evolution of the anode in both media including the formation and the growth on the biofilm.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microbial Fuel Cells and Bioremediation · Supercapacitor Materials and Fabrication · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Electricity production by geobacter sulfurreducens attached to electrodes10.1128/AEM.69.3.1548-1555.2003 ↗
2. Checking graphite and stainless anodes with an experimental model of marine microbial fuel cell10.1016/j.biortech.2008.04.054 ↗
3. First air-tolerant effective stainless steel microbial anode obtained from a natural marine biofilm10.1016/j.biortech.2009.02.025 ↗
4. Stainless steel is a promising electrode material for anodes of microbial fuel cells10.1039/c2ee22429a ↗
5. Stainless steel foam pushes the current provided by microbial bioanodes for bioelectrochemical systems10.1039/C3EE44114H ↗
6. Low-cost stainless-steel wool anodes modified with polyaniline and polypyrrole for high-performance microbial fuel cells10.1016/j.jpowsour.2018.01.001 ↗
7. Three-dimensional macroporous anodes based on stainless steel fiber felt for high-performance microbial fuel cells10.1016/j.jpowsour.2014.02.035 ↗
8. Characterization of the 3-dimensional microstructure of a graphite negative electrode from a Li-ion battery10.1016/j.elecom.2009.12.038 ↗
9. Investigation of lithium-ion polymer battery cell failure using X-ray computed tomography10.1016/j.elecom.2011.03.022 ↗
10. Microstructural analysis of a solid oxide fuel cell anode using focused ion beam techniques coupled with electrochemical simulation10.1016/j.jpowsour.2010.02.047 ↗
11. Image based modelling of microstructural heterogeneity in LiFePO 4 electrodes for Li-ion batteries10.1016/j.jpowsour.2013.04.156 ↗
12. Monitoring the morphological changes of Si-based electrodes by X-ray computed tomography: A 4D-multiscale approach10.1016/j.nanoen.2020.104848 ↗
13. Progress in In Situ X-Ray Tomographic Microscopy of Liquid Water in Gas Diffusion Layers of PEFC10.1149/1.3596556 ↗
14. Gas-diffusion-layer structural properties under compression via X-ray tomography10.1016/j.jpowsour.2016.08.020 ↗
15. Interfacial analysis of a PEM electrolyzer using X-ray computed tomography10.1039/C9SE00364A ↗
16. Tortuosity of Battery Electrodes : Validation of Impedance-Derived Values and Critical Comparison with 3D Tomography Tortuosity of Battery Electrodes : Validation of Impedance-Derived Values and Critical Comparison with 3D Tomography10.1149/2.0231803jes ↗
17. Tortuosity Determination of Battery Electrodes and Separators by Impedance Spectroscopy Tortuosity Determination of Battery Electrodes and Separators by Impedance Spectroscopy10.1149/2.1141607jes ↗
18. Advanced Porous Electrode Modelling Framework Based on More Consistent Virtual Representation of the Electrode Topology Advanced Porous Electrode Modelling Framework Based on More Consistent Virtual Representation of the Electrode Topology10.1149/1945-7111/ab84fb ↗
19. On porous electrodes in electrolyte solutions*10.1016/0013-4686(63)80042-0 ↗
20. Electrochemical Impedance and Complex Capacitance to Interpret Electrochemical Capacitor10.5796/electrochemistry.75.649 ↗
21. Complex impedance spectra of porous electrode with fractal structure10.1016/j.electacta.2009.10.016 ↗
22. Generalization of transmission line models for deriving the impedance of diffusion and porous media10.1016/j.electacta.2012.05.014 ↗
23. Complex Capacitance Analysis on Leakage Current Appearing in Electric Double-layer Capacitor Carbon Electrode10.1149/1.1931469 ↗
24. Theoretical and Experimental Analysis of Porous Electrodes for Lithium- Ion Batteries by Electrochemical Impedance Spectroscopy Using a Symmetric Cell Theoretical and Experimental Analysis of Porous Electrodes for Lithium-Ion Batteries by Electrochemical10.1149/2.057207jes ↗
25. Monofilament entangled materials: relationship between microstructural properties and macroscopic behaviour
26. On the Application of X-ray Microtomography in the Field of Materials Science10.1002/1527-2648(200108)3:8<539::AID-ADEM539>3.0.CO;2-6 ↗
27. Baruchel · 2000
28. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
29. A new method for the model-independent assessment of thickness in three-dimensional images10.1046/j.1365-2818.1997.1340694.x ↗
30. Middaugh · 2009
31. The anode potential regulates bacterial activity in microbial fuel cells10.1007/s00253-007-1327-8 ↗
32. Enhanced Graphical Representation of Electrochemical Impedance Data10.1149/1.2168377 ↗
33. The analysis of electrode impedance complicated by the presence of a constant phase element10.1016/S0022-0728(84)80324-1 ↗
34. Dielectric Properties of Materials Showing Constant-Phase-Element (CPE ) Impedance Response Dielectric Properties of Materials Showing Constant-Phase-Element (CPE) Impedance Response10.1149/2.033306jes ↗
35. Ion transport in microbial fuel cells: key roles, theory and critical review10.1016/j.apenergy.2016.09.043 ↗