journal article·1985-11-01

Comparisons of GaAs , Tungsten, and Photoresist Etch Rates and GaAs Surfaces Using RIE with CF 4, CF 4 + N 2, and SF 6 + N 2 Mixtures

Nobuhiko Susa

Publisher page

Abstract

Etch rates for , tungsten, and photoresist were compared using , , and gases. Etch rate ratio between the W and photoresist can be increased by gas addition, with a negligibly low etch rate. surfaces exposed to or plasmas were characterized by means of photoluminescence (PL), Schottky contacts, secondary ion mass spectroscopy (SIMS), and Auger electron spectroscopy (AES). The PL intensity measurements and Schottky characteristics revealed that the damage to the surface was somewhat smaller than that caused by pure gas. The AES and SIMS measurements showed that the change in Ga/As composition after reactive ion etching was negligibly small. Results of heat‐treatment are also described. Curious annealing characteristics were observed in the , suggesting the existence of .
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Semiconductor materials and devices · Electron and X-Ray Spectroscopy Techniques · Ion-surface interactions and analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Nippon Telegraph and Telephone Corporation, Musashino Electrical Communication Laboratory, Musashino‐shi, Tokyo 180, Japan

References

Reference metadata was not supplied for this record.