Deposition Method to Control Plasma‐Enhanced Chemical Vapor Deposition Tetraethylortho Silicate Oxide Charge
Source abstract
Abstract
A deposition method to control the postanneal positive oxide charge in undoped plasma‐enhanced chemical vapor deposition (PECVD) tetraethylortho silicate (TEOS) oxide is demonstrated. The method uses the preanneal oxide film stress as the determining characteristic for predicting the resulting post‐anneal oxide film stress as the determining characteristic for predicting the resulting post‐anneal oxide charge. The undoped TEOS oxide, deposited by PECVD techniques, exhibits a positive charge after high temperature anneal (900°C) in an ambient. The charge is not observed in PECVD TEOS oxide films annealed in nitrogen at 900°C or in LPCVD TEOS oxide films annealed in at 900°C. The post‐anneal oxide charge can be controlled with the as‐deposited (pre‐anneal) oxide film stress. Depositing an oxide with tensile stress, rather than a compressive stress, can reduce or eliminate the positive oxide charge. Lower post‐anneal oxide charge is correlated with higher tensile stress in the pre‐anneal oxide film. The as‐deposited (pre‐anneal) tensile‐film has compressive film characteristics after a high temperature anneal. The as‐deposited film stress can be controlled with the amount of ion bombardment by either varying the total RF power or amount of low frequency power in commercial PECVD deposition systems.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Ga2O3 and related materials · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Motorola Inc. MOS 6‐Manufacturing Technology Line, Mesa, Arizona 85202
Motorola Inc. Compound Semiconductor One, Tempe, Arizona 85284
Motorola Inc. Advanced Custom Technologies, Mesa, Arizona 85202
References
Reference metadata was not supplied for this record.