journal article·1996-11-01

Comparison of ICl and IBr Plasma Chemistries for Etching of InGaAlP Alloys

J. Hong, J. W. Lee, E. S. Lambers, C. R. Abernathy, S. J. Pearton, C. Constantine, W. S. Hobson

Publisher page

Abstract

ICl and IBr provide rapid etching of the ternary alloys InGaP, AlInP, and AlGaP under electron cyclotron resonance conditions. The rates are almost independent of microwave power in the range 400 to 1000 W, with typical values of ∼1.5 μm/min with ICl/Ar and ∼0.4 μm/min with IBr/Ar. At low microwave powers (⩽750 W), the etched surface morphologies are quite smooth and there is little degradation of photoresist masks. High Al content ( x ⩾ 0.7) alloys appear to be good candidates as etchstop layers in InGaAlP device structures when using these plasma chemistries.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Semiconductor materials and devices · Plasma Diagnostics and Applications · Advancements in Semiconductor Devices and Circuit Design

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering, University of Florida, Gainesville, Florida 32611

Plasma Therm IP, St. Petersburg, Florida 33716

Bell Laboratories, Lucent Technologies, Murray Hill, New Jersey 07974

References

Reference metadata was not supplied for this record.