A novel method combining VAT photopolymerization and casting for the fabrication of biodegradable Zn–1Mg scaffolds with triply periodic minimal surface
Source abstract
Abstract
Zinc alloy porous scaffolds are expected to be the next generation of degradable orthopedic implants attributed to their suitable degradation rate. However, a few studies have thoroughly investigated its applicable preparation method and functionality as an orthopedic implant. This study fabricated Zn-1Mg porous scaffolds with triply periodic minimal surface (TPMS) structure by a novel method combining VAT photopolymerization and casting. As-built porous scaffolds displayed fully connected pore structures with controllable topology. The manufacturability, mechanical properties, corrosion behaviors, biocompatibility, and antimicrobial performance of the bioscaffolds with pore sizes of 650 μm, 800 μm, and 1040 μm were investigated, and then compared and discussed with each other. In simulations, the mechanical behaviors of porous scaffolds exhibited the same tendency as the experiments. In addition, the mechanical properties of porous scaffolds as a function of degradation time were studied through a 90-day immersion experiment, which can provide a new option for analyzing the mechanical properties of porous scaffolds implanted in vivo. The G06 scaffold with lower pore size presented better mechanical properties before and after degradation compared with G10. The G06 scaffold with the pore size of 650 μm revealed good biocompatibility and antibacterial properties, which makes it possible to be one of the candidates for orthopedic implants.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Bone Tissue Engineering Materials · Cellular and Composite Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Mechanical properties of 3D printed polymeric Gyroid cellular structures: experimental and finite element study10.1016/j.matdes.2019.107597 ↗
2. Current status of zinc in health and disease states10.1136/adc.54.12.909 ↗
3. In vitro and in vivo studies to evaluate the feasibility of Zn-0.1Li and Zn-0.8Mg application in the uterine cavity microenvironment compared to pure zinc10.1016/j.actbio.2020.12.048 ↗
4. Synthetic bone: design by additive manufacturing10.1016/j.actbio.2019.07.049 ↗
5. Recent advances in bone tissue engineering scaffolds10.1016/j.tibtech.2012.07.005 ↗
6. Zinc exhibits ideal physiological corrosion behavior for bioabsorbable stents10.1002/adma.201300226 ↗
7. Challenges and opportunities in the selective laser melting of biodegradable metals for load-bearing bone scaffold applications10.1007/s11661-020-05829-7 ↗
8. Porous zinc scaffolds for bone tissue engineering applications: a novel additive manufacturing and casting approach10.1016/j.msec.2020.110738 ↗
9. Selective laser melting of pure Zn with high density for biodegradable implant manufacturing
10. Beautiful and functional: a review of biomimetic design in additive manufacturing
11. Improved cytotoxicity testing of magnesium materials10.1016/j.mseb.2011.04.008 ↗
12. Antibacterial approaches in tissue engineering using metal ions and nanoparticles: from mechanisms to applications
13. Single point exposure LPBF for the production of biodegradable Zn-alloy lattice structures
14. Mechanical behavior of TPMS-based scaffolds: a comparison between minimal surfaces and their lattice structures10.1007/s42452-019-1167-z ↗
15. Zinc deficiency: a special challenge10.1093/jn/137.4.1101 ↗
16. How does tissue regeneration influence the mechanical behavior of additively manufactured porous biomaterials?10.1016/j.jmbbm.2016.10.003 ↗
17. Synthesis of biodegradable Zn-based scaffolds using NaCl templates: relationship between porosity, compressive properties and degradation behavior10.1016/j.matchar.2018.01.033 ↗
18. Multi-interactions of dislocations and refined microstructure in a high strength and toughness Zn-Mg-Mn alloy10.1016/j.jmrt.2020.09.126 ↗
19. High-strength biodegradable zinc alloy implants with antibacterial and osteogenic properties for the treatment of MRSA-induced rat osteomyelitis10.1016/j.biomaterials.2022.121663 ↗
20. Microstructure and mechanical properties of the micrograined hypoeutectic Zn-Mg alloy10.1007/s12613-016-1336-7 ↗
21. Progress of biodegradable metals10.1016/j.pnsc.2014.08.014 ↗
22. Response of human periosteal cells to degradation products of zinc and its alloy10.1016/j.msec.2019.110208 ↗
23. Biodegradation-affected fatigue behavior of additively manufactured porous magnesium
24. Additively manufactured functionally graded biodegradable porous zinc10.1039/C9BM01904A ↗
25. Additively manufactured biodegradable porous zinc10.1016/j.actbio.2019.10.034 ↗
26. Mechanical behaviours and mass transport properties of bone-mimicking scaffolds consisted of gyroid structures manufactured using selective laser melting10.1016/j.jmbbm.2019.01.023 ↗
27. Mathematically defined tissue engineering scaffold architectures prepared by stereolithography10.1016/j.biomaterials.2010.05.068 ↗
28. Additive manufacturing of Zn-Mg alloy porous scaffolds with enhanced osseointegration: in vitro and in vivo studies10.1016/j.actbio.2022.03.055 ↗
29. Additive manufacturing of Zn-Mg alloy porous scaffolds with enhanced osseointegration: in vitro and in vivo studies10.1016/j.actbio.2022.03.055 ↗
30. Additive manufacturing of biodegradable Zn-xWE43 porous scaffolds: formation quality, microstructure and mechanical properties10.1016/j.matdes.2019.107937 ↗
31. Biodegradable Zn–Cu alloys show antibacterial activity against MRSA bone infection by inhibiting pathogen adhesion and biofilm formation10.1016/j.actbio.2020.09.041 ↗
32. Biomineralized porous composite scaffolds prepared by chemical synthesis for bone tissue regeneration10.1016/j.actbio.2010.04.018 ↗
33. Recent advances in biodegradable metals for medical sutures: a critical review10.1002/adhm.201500189 ↗
34. Dietary reference intakes: vitamin A, vitamin K, arsenic, boron, chromium, copper, iodine, iron, manganese, molybdenum, nickel, silicon, vanadium, and zinc10.1016/S0002-8223(01)00078-5 ↗
35. Additive manufacturing of biodegradable Zn-xMg alloys: effect of Mg content on manufacturability, microstructure and mechanical properties
36. Additive manufacturing of biodegradable Zn-xMg alloys: effect of Mg content on manufacturability, microstructure and mechanical properties
37. Ion association. VI. Interactions between calcium, magnesium, inorganic phosphate, citrate and protein in normal human plasma10.1172/JCI104306 ↗
38. Recommendation for modifying current cytotoxicity testing standards for biodegradable magnesium-based materials10.1016/j.actbio.2015.04.011 ↗
39. The in vitro and in vivo biological effects and osteogenic activity of novel biodegradable porous Mg alloy scaffolds10.1016/j.matdes.2020.108514 ↗
40. Densification behavior of pure Zn metal parts produced by selective laser melting for manufacturing biodegradable implants10.1016/j.jmatprotec.2018.03.007 ↗
41. Laser additive manufacturing of Zn metal parts for biodegradable applications: processing, formation quality and mechanical properties10.1016/j.matdes.2018.05.057 ↗
42. EIS and XPS investigations on the corrosion mechanism of ternary Zn–Co–Mo alloy coatings in NaCl solution10.1016/j.apsusc.2015.12.183 ↗
43. In vitro and in vivo corrosion measurements of magnesium alloys10.1016/j.biomaterials.2005.07.037 ↗
44. Investigation on characteristic and formation mechanism of porosity defects of Al–Li alloys prepared by sand casting10.1016/j.jmrt.2022.06.148 ↗
45. Fabrication of Cu-Mg alloy foam with close pore structure by gas release reaction powder metallurgical approach10.1016/j.jallcom.2018.06.365 ↗
46. An investigation into the effect of gradients on the manufacturing fidelity of triply periodic minimal surface structures with graded density fabricated by selective laser melting10.1016/j.jmatprotec.2019.116367 ↗
47. Porous magnesium-based scaffolds for tissue engineering10.1016/j.msec.2016.11.027 ↗
48. In vitro corrosion behavior and in vivo biodegradation of biomedical β-Ca3(PO4)2/Mg–Zn composites10.1016/j.actbio.2012.04.009 ↗
49. Structure-property relationship in high strength and lightweight AlSi10Mg microlattices fabricated by selective laser melting10.1016/j.matdes.2019.108062 ↗
50. Additive manufacturing technology for porous metal implant applications and triple minimal surface structures: a review
51. Biodegradable metals10.1016/j.mser.2014.01.001 ↗
52. Biological responses and mechanisms of human bone marrow mesenchymal stem cells to Zn and Mg biomaterials10.1021/acsami.7b06654 ↗
53. Biological responses and mechanisms of human bone marrow mesenchymal stem cells to Zn and Mg biomaterials10.1021/acsami.7b06654 ↗