Advancement in biological and mechanical behavior of 3D printed poly lactic acid bone plates using polydopamine coating: Innovation for healthcare
Source abstract
Abstract
The metallic biomaterials have been proclaimed to exhibit stress shielding with discharge of toxic ions, leading to polymeric implants attracting interest in 3D Printing domain. In this study, Poly Lactic Acid based 336 bone plates are fabricated using Fused Filament Fabrication with printing parameters being varied. Polydopamine, being biocompatible, is deposited on fabricated bone plates at varying submersion time, shaker speed and coating solutions concentration. The study involves witnessing the effect of printing and coating parameters on biological behavior of bone plates upon preservation in Simulated Body Fluid and Hank's Balanced Salt Solution. The findings propose the close relation of degradation with apatite growth. The highest degradation rate with significant reduction in mechanical characteristics are shown by uncoated bone plates. These bone plates have porous structure at 20% infill density, 0.5 mm layer height, 0.4 mm wall thickness and 100 mm/s print speed which could result in complete degradation with partial healing of bone fracture. The study suggests the preservation of bone plates coated at 120 h' submersion time and 120 RPM shaker speed in 3 mg/ml concentrated solution which showed lower apatite formation. Thus, the coating would slow down degradation of PLA bone plates, resulting in complete healing of bone fracture.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Mechanical and biological behaviour of additive manufactured biomimetic biodegradable orthopaedic cortical screws
2. Three-dimensional printing of triply periodic minimal surface structured scaffolds for load-bearing bone defects10.1002/pen.26258 ↗
3. Current biomedical applications of 3D printing and additive manufacturing
4. Systemic toxicity eliciting metal ion levels from metallic implants and orthopedic devices – a mini review10.1016/j.toxlet.2021.07.004 ↗
5. PLA/Hydroxyapatite scaffolds exhibit in vitro immunological inertness and promote robust osteogenic differentiation of human mesenchymal stem cells without osteogenic stimuli10.1038/s41598-022-05207-w ↗
6. Nanocrystalline hydroxyapatite coatings on titanium: a new fast biomimetic method10.1016/j.biomaterials.2004.10.034 ↗
7. Bliley · 2015
8. Titanium scaffolds for osteointegration: mechanical, in vitro and corrosion behaviour10.1007/s10856-006-0052-7 ↗
9. Additive manufacturing of PLA structures using fused deposition modelling: effect of process parameters on mechanical properties and their optimal selection10.1016/j.matdes.2017.03.065 ↗
10. Enhancement of critical-sized bone defect regeneration by magnesium oxide-reinforced 3D scaffold with improved osteogenic and angiogenic properties10.1016/j.jmst.2022.06.036 ↗
11. Enhancing dimensional accuracy of FDM based biomedical implant replicas by statistically controlled vapor smoothing process10.1007/s40964-016-0009-4 ↗
12. Reinforcement of polylactic acid with bioceramics (alumina and YSZ composites) and their thermomechanical and physical properties for biomedical application10.1002/vnl.21837 ↗
13. The concept of locking plates
14. Additive manufacturing of biodegradable porous orthopaedic screw
15. Effect of fused filament fabrication process parameters on compressive strength of thermoplastic polyurethane and polylactic acid lattice structures10.1007/s11665-022-06664-0 ↗
16. Vertical and uniform growth of MoS2 nanosheets on GO nanosheets for efficient mechanical reinforcement in polymer scaffold10.1080/17452759.2022.2115384 ↗
17. A multimaterial scaffold with tunable properties: toward bone tissue repair10.1002/advs.201700817 ↗
18. Structural and functional adaptive artificial bone: materials, fabrications, and properties
19. Effect of deacetylation on property of electrospun chitosan/PVA nanofibrous membrane and removal of methyl orange, Fe(III) and Cr(VI) ions10.1016/j.carbpol.2017.08.115 ↗
20. A study on effect of fused deposition modeling process parameters on mechanical properties
21. Overview of innovative advances in bioresorbable plate systems for oral and maxillofacial surgery10.1016/j.jdsr.2018.03.003 ↗
22. Poly(dopamine) coating of 3D printed poly(lactic acid) scaffolds for bone tissue engineering10.1016/j.msec.2015.06.028 ↗
23. Poly(dopamine) coating of 3D printed poly(lactic acid) scaffolds for bone tissue engineering10.1016/j.msec.2015.06.028 ↗
24. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
25. A Ni- and Cu-free Zr-based bulk metallic glass with excellent resistance to stress corrosion cracking in simulated body fluids10.1016/j.msea.2012.02.047 ↗
26. Orthopaedic metals and their potential toxicity in the arthroplasty patient10.1302/0301-620X.89B5.18903 ↗
27. The role of three-dimensional printing in healthcare and medicine10.1016/j.matdes.2020.108940 ↗
28. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
29. The role of additive manufacturing for biomedical applications: a critical review10.1016/j.jmapro.2021.02.022 ↗
30. Gelatine/PLLA sponge-like scaffolds: morphological and biological characterization10.1007/s10856-007-0127-0 ↗
31. Lee · 2019
32. Catecholamine polymers as surface modifiers for enhancing interfacial strength of fiber-reinforced composites10.1016/j.compscitech.2015.01.021 ↗
33. Materials evolution of bone plates for internal fixation of bone fractures: a review10.1016/j.jmst.2019.07.024 ↗
34. Absorbable implants versus metal implants for the treatment of ankle fractures: a meta-analysis10.3892/etm.2013.1017 ↗
35. Less harmful acidic degradation of poly(lactic-co-glycolic acid) bone tissue engineering scaffolds through titania nanoparticle addition10.2147/nano.2006.1.4.541 ↗
36. Mechanical design optimization of bioabsorbable fixation devices for bone fractures10.1097/SCS.0b013e31819b96fb ↗
37. Biodegradation behavior of poly(lactic acid) (PLA)/Distiller's dried grains with solubles (DDGS) composites10.1021/sc500440q ↗
38. In-vitro degradation of hollow silica reinforced magnesium syntactic foams in different simulated body fluids for biomedical applications10.3390/met10121583 ↗
39. Biomedical implants: corrosion and its prevention - a review10.2174/1877610801002010040 ↗
40. A review of locking compression plate biomechanics and their advantages as internal fixators in fracture healing10.1016/j.clinbiomech.2007.08.004 ↗
41. Frontiers of 3D printing/additive manufacturing: from human organs to aircraft fabrication10.1016/j.jmst.2016.08.011 ↗
42. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗
43. Advances in 3D printing materials processing-environmental impacts and alleviation measures
44. Three-dimensional printing constructs based on the chitosan for tissue regeneration: state of the art, developing directions and prospect trends10.3390/ma13112663 ↗
45. Thermomechanical and in vitro biological characterization of injection-molded PLGA craniofacial plates
46. Recent advances in extrusion-based 3D printing for biomedical applications10.1002/adhm.201701161 ↗
47. The manufacture of honeycomb cores using Fused Deposition Modeling
48. Rapid prototyping for patient-specific surgical orthopaedics guides: a systematic literature review10.1177/0954411916636919 ↗
49. Richardson · 2019 · 156
50. Polydopamine surface chemistry: a decade of discovery
51. Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds10.1016/j.jmbbm.2015.11.036 ↗
52. Parametric experimental investigation of additive manufacturing-based distal ulna bone plate: a response surface methodology-based design approach10.1108/RPJ-06-2022-0205 ↗
53. Three point bending and tensile properties of bio-additive polydopamine-coated 3D printing-based distal ulna small locking bone plates: future need of orthopedic implants
54. Biodegradable materials for bone repair and tissue engineering applications10.3390/ma8095273 ↗
55. Biodegradable metallic bone implants10.1039/C8QM00507A ↗
56. In situ synthesis of hydroxyapatite nanorods on graphene oxide nanosheets and their reinforcement in biopolymer scaffold10.1016/j.jare.2021.03.009 ↗
57. Accelerated degradation of HAP/PLLA bone scaffold by PGA blending facilitates bioactivity and osteoconductivity
58. Synthesis, characterization, and bioactivity investigation of biomimetic biodegradable PLA scaffold fabricated by fused filament fabrication process10.1007/s40430-019-1625-y ↗
59. Singh · 2021
60. Enhanced polymer degradation of polyethylene and polypropylene by novel thermophilic consortia of Brevibacillus sps. and Aneurinibacillus sp. screened from waste management landfills and sewage treatment plants10.1016/j.polymdegradstab.2018.01.018 ↗
61. Son · 2020 · 103
62. Limitations of current metallic bone plates: Towards development of composite bone plates
63. Characterization, modeling and simulation of fused deposition modeling fabricated part surfaces
64. Evaluation of bone marrow stem cell response to PLA scaffolds manufactured by 3D printing and coated with polydopamine and type I collagen10.1002/jbm.b.34093 ↗
65. Internal plate fixation of fractures: short history and recent developments10.1007/s00776-005-0984-7 ↗
66. Halloysite nanotubes coated 3D printed PLA pattern for guiding human mesenchymal stem cells (hMSCs) orientation10.1016/j.cej.2018.11.145 ↗
67. A method to predict the ultimate tensile strength of 3D printing polylactic acid (PLA) materials with different printing orientations10.1016/j.compositesb.2019.01.025 ↗
68. Historical development of simulated body fluids used in biomedical applications: a review10.1016/j.microc.2020.104713 ↗
69. Evaluation of the effect of bone plate modulus on the early bone healing of fractured tibia10.1016/j.compositesb.2022.109668 ↗
70. Enhanced mechanical properties of self-polymerized polydopamine-coated recycled PLA filament used in 3D printing10.1016/j.apsusc.2018.01.257 ↗
71. Additively-manufactured PEEK/HA porous scaffolds with excellent osteogenesis for bone tissue repairing10.1016/j.compositesb.2021.109508 ↗