The effect of water on the mechanical properties of soluble and insoluble ceramic cements
Source abstract
Abstract
Ceramic cements are good candidates for the stabilization of fractured bone due to their potential ease of application and biological advantages. New formulations of ceramic cements have been tested for their mechanical properties, including strength, stiffness, toughness and durability. The changes in the mechanical properties of a soluble cement (calcium sulfate) upon water-saturation (saturation) was reported in our previous study, highlighting the need to test ceramic cements using saturated samples. It is not clear if the changes in the mechanical properties of ceramic cements are exclusive to soluble cements. Therefore the aim of the present study was to observe the changes in the mechanical properties of soluble and insoluble ceramic cements upon saturation. A cement with high solubility (calcium sulfate dihydrate, CSD) and a cement with low solubility (dicalcium phosphate dihydrate, DCPD) were tested. Three-point bending tests were performed on four different groups of: saturated CSD, non-saturated CSD, saturated DCPD, and non-saturated DCPD samples. X-ray diffraction analysis and scanning electron microscopy were also performed on a sample from each group. Flexural strength, effective flexural modulus and flexural strain at maximum stress, lattice volume, and crystal sizes and shape were compared, independently, between saturated and non-saturated groups of CSD and DCPD. Although material dissolution did not occur in all cases, all calculated mechanical properties decreased significantly in both CSD and DCPD upon saturation. The results indicate that the reductions in the mechanical properties of saturated ceramic cements are not dependent on the solubility of a ceramic cement. The outcome raised the importance of testing any implantable ceramic cements in saturated condition to estimate its in vivo mechanical properties.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Orthopaedic implants and arthroplasty · Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Effects of DCPD cement chemistry on degradation properties and cytocompatibility: comparison of MCPM/β-TCP and MCPM/HA formulations10.1088/1748-6041/8/2/025010 ↗
2. Combined effect of strontium and pyrophosphate on the properties of brushite cements10.1016/j.actbio.2007.12.001 ↗
3. The effect of water contents on the strength of calcium sulphate plaster products10.1002/jctb.5000650501 ↗
4. ASTM Standard C1161 · 2013
5. Calcium phosphate bone cements10.1134/S0020168511130024 ↗
6. Molecular mechanisms of biomaterial-driven osteogenic differentiation in human mesenchymal stromal cells10.1039/c3ib40027a ↗
7. In vitro aging of calcium phosphate cement10.1023/A:1008927624493 ↗
8. Correlations between mechanical stress history and tissue differentiation in initial fracture healing10.1002/jor.1100060517 ↗
9. Carter · 2013
10. Mechanical characterization of brushite and hydroxyapatite cements10.1016/S0142-9612(01)00041-2 ↗
11. The kinetics of dissolution of calcium sulphate dihydrate in water10.1016/0022-0248(76)90247-5 ↗
12. Effects of mechanical factors on the fracture healing process10.1097/00003086-199810001-00015 ↗
13. Magnitudes of local stress and strain along bony surfaces predict the course and type of fracture healing10.1016/S0021-9290(98)00153-5 ↗
14. Coelho A.A. 2007. TOPAS-ACADEMIC v4.1.
15. Crystal structure of brushite, calcium hydrogen orthophosphate dihydrate: a neutron-diffraction investigation10.1039/j19710003725 ↗
16. Histomorphometric analysis of fracture healing cascade in acute osteoporotic vertebral body fractures10.1016/j.bone.2006.10.009 ↗
17. A refinement of the crystal structure of CaHPO410.1107/S056774087200322X ↗
18. A new theoretical approach to calcium phosphates, aqueous solutions and bone remodeling
19. Mechanical characterization of bone graft substitute ceramic cements10.1016/j.injury.2011.02.004 ↗
20. In vitro ageing of brushite calcium phosphate cement10.1016/S0142-9612(03)00293-X ↗
21. The deformation and ageing of mild steel: III discussions of results10.1088/0370-1301/64/9/303 ↗
22. Bone substitutes in vertebroplasty10.1007/s005860100308 ↗
23. Real-time monitoring of the setting reaction of brushite-forming cement using isothermal differential scanning calorimetry10.1002/jbm.b.30550 ↗
24. Self-setting properties and in vitro bioactivity of calcium sulfate hemihydrate-tricalcium silicate composite bone cement10.1016/j.actbio.2007.05.003 ↗
25. Comparison of biophysical stimuli for mechano-regulation of tissue differentiation during fracture healing10.1016/j.jbiomech.2005.01.037 ↗
26. Phosphorus: Chemistry
27. The compressive modulus and strength of saturated calcium sulphate dehydrate cements: implications for testing standards10.1016/j.jmbbm.2014.01.018 ↗
28. Biomechanical model to simulate tissue differentiation and bone regeneration: application to fracture healing10.1007/BF02347690 ↗
29. A mechano-regulation model for tissue differentiation during fracture healing: analysis of gap size and loading10.1016/S0021-9290(02)00086-6 ↗
30. Mechanical and degration behavior of polymer-calcium sulphate composites
31. The effect of plaster (CaSo4·1/2H2O) on the compressive strength, self-setting property, and in vitro bioactivity of silicate-based bone cement10.1002/jbm.b.32837 ↗
32. Grain boundaries in ceramic materials10.1007/978-1-4684-7450-3_1 ↗
33. The crystal structure of monocalcium phosphate monohydrate, Ca(H2PO4)2·H2O10.1107/S0365110X56000413 ↗
34. Calcium phosphate ceramic cements: study of the βtricalcium phosphate – monocalcium phosphate system10.1016/0142-9612(89)90089-6 ↗
35. Miyahara · 1992
36. Mechanical properties of carbonated apatite bone mineral subsitute: strength, fracture and fatigue behaviour
37. Factors influencing the compressive strength of an injectable calcium sulfate-hydroxyapatite cement
38. Evolution of mechanical properties of gysum in time
39. Unit-cell refinement from powder diffraction scans10.1107/S0021889881009618 ↗
40. Penel G., Leroy N., van Landuyt P., Flautre B., Hardouin P., Lemaitre J., Leroy G. 1999. Raman microspectrometry studies of brushite cement: in vivo evolution in a sheep model. Bone 252 Suppl. 81S-84S.10.1016/S8756-3282(99)00139-8 ↗
41. Biophysical stimuli on cells during tissue differentiation at implant interfaces10.1016/S0021-9290(96)00140-6 ↗
42. Water effect on internal friction of set plaster10.1016/j.msea.2006.01.152 ↗
43. Ceramic tensile strength-grain size relations: grain sizes, slopes and branch intersections10.1023/A:1018511613779 ↗
44. The crystallization of calcium sulfate dihydrate10.1016/0021-9797(71)90339-0 ↗
45. Dicalcium phosphate cements: brushite and monetite10.1016/j.actbio.2011.08.005 ↗
46. An evaluation of methods to determine the porosity of calcium phosphate cements10.1002/jbm.b.33173 ↗
47. Microstructure and biomechanical characteristics of bone substitutes for trauma and orthopaedic surgery
48. Settling of particles in fresh cement pastes10.1111/j.1151-2916.1972.tb11340.x ↗
49. Subchondral defects in caprine femora augmented with insitu setting hydroxyapatite cement, polymethylmethacrylate or autogenous bone graft: biomechanical and histomophological analysis after two-years10.1016/S0736-0266(01)00124-3 ↗
50. Bone healing response to a synthetic calcium sulfate/ß-tricalcium phosphate graft material in a sheep vertebral body defect model10.1002/jbm.b.32758 ↗
51. Effects of strain rate on the mechanical properties of tricalcium phosphate/poly(L-lactide) composites
52. Fabrication and mechanical properties of calcium phosphate cements (CPC) for bone substitution10.1016/j.msec.2010.10.014 ↗