journal article·2010-11

Evaluation of an experimental dental porcelain

Ibrahim M. Hamouda, Noha A. El-Waseffy, Ahmed M. Hasan, Abeer A. El-Falal

Publisher page

Abstract

The aim of this study was to evaluate fracture toughness, hardness, ceramic/metal bond strength and microstructure of experimental dental porcelain and compare it with commercial type. Specimens of specific dimensions were prepared. Fracture toughness was assessed by a three-point bending test. The Vickers hardness was measured using a microhardness tester. The ceramometal bond strength was measured using a universal testing machine. The load was applied at the porcelain/metal interface via a chisel edged blade with a crosshead speed of 2.0 mm/min until fracture. The polished specimens of dental porcelain were chemically etched and the microstructure was analyzed with a scanning electron microscope. The results showed comparable fracture toughness and bond strength for both materials, while the experimental porcelain exhibited higher hardness. The experimental porcelain showed uniform cohesive failure while the commercial type showed mixed mode of failure. The microstructure of the experimental porcelain was tetragonal leucite crystals dispersed randomly in a glass matrix. The leucite crystals exist in two forms, acicular and rod like structures. It was concluded that the experimental porcelain has adequate fracture toughness and ceramic/metal bond strength that can resist the rapid crack propagation and its consequent catastrophic failure, which indicates a material serviceability in the oral cavity.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Dental Research and COVID-19

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Comparison of the bond strength of laser-sintered and cast base metal dental alloys to porcelain10.1016/j.dental.2008.03.001 ↗
2. Fracture toughness and hardness evaluation of three pressable all-ceramic dental materials10.1016/S0300-5712(03)00025-3 ↗
3. Shear bond strength of aesthetic materials bonded to Ni–Cr alloy10.1016/S0300-5712(03)00012-5 ↗
4. Anusavice · 2003
5. Metal ceramic compatibility: a review of the literature10.1016/0022-3913(90)90259-F ↗
6. Phase identification in dental porcelains for ceramo-metallic restorations10.1016/0109-5641(89)90094-8 ↗
7. Evaluation of shear bond strength at the interface of two porcelains and pure titanium injected into the casting mold at three different temperatures10.1016/j.prosdent.2004.03.033 ↗
8. Influence of leucite content on slow crack growth of dental porcelains10.1016/j.dental.2008.01.003 ↗
9. Correlation between fracture toughness and leucite content in dental porcelains10.1016/j.jdent.2005.02.001 ↗
10. Craig · 2002
11. In vivo wear ranking of some restorative materials
12. Effects of tin plating on base metal alloy-ceramic bond strength
13. Characterizing ceramics and the interfacial adhesion to resin: the relationship of surface treatment, bond strength, interfacial toughness and fractography10.1590/S1678-77572005000200002 ↗
14. Effect of ceramic surface treatment on tensile bond strength to a resin cement
15. Shear bond strengths of a ceramic system to alternative metal alloys10.1016/j.prosdent.2004.10.017 ↗
16. Effect of cubic leucite stabilization on the flexural strength of feldspathic dental porcelain10.1177/00220345960750120301 ↗
17. Bond strength porcelain on cast vs. wrought titanium
18. Preparation and characterization of low fusion leucite dental porcelain10.1179/096797803225009337 ↗
19. Fracture toughness of nine flowable resin composites10.1067/mpr.2003.33 ↗
20. The effects of enamel wear on the metal–porcelain interface10.1016/0022-3913(83)90198-1 ↗
21. Dental ceramic restorative systems
22. Effect of adhesives on bond strength of porcelain veneer to base metal alloy
23. A shear test for the bond strength of ceramometals10.1016/0022-3913(87)90270-8 ↗
24. Ceramics in dental restorations—a review and critical issues
25. Shear bond strength of a ceramic to Co–Cr alloys10.1016/S0022-3913(08)60009-8 ↗
26. Brief overview of dental ceramics
27. Tensile strength determination of the interface between porcelain-fused to gold10.1002/jbm.820030302 ↗
28. Ceramics in dentistry: historical roots and current perspectives10.1016/S0022-3913(96)90413-8 ↗
29. Microfracture behavior of composite resins containing irregular-shaped fillers10.1046/j.1365-2842.2002.00940.x ↗
30. Nature of adherence of porcelain enamels to metals10.1111/j.1151-2916.1959.tb13567.x ↗
31. Study of bond strength of dental porcelain fused to metal10.1177/00220345660450040501 ↗
32. Ask the expert, will ceramic restorations be challenged in the future?
33. Microstructures and mechanical properties of interface between porcelain and Ni–Cr alloy10.1016/j.msea.2008.07.029 ↗
34. Studies on the wear of porcelain, enamel, and gold10.1016/0022-3913(71)90191-0 ↗
35. Noort · 2002
36. O’Brien, W.J., 1977. Cohesive plateau theory of porcelain alloy bonding. In: Yamada H.N., Grenoble P.B. (Eds.), Dental Porcelain: The State of the Art. Univ of S Calif School of Dentistry, Los Angeles, pp. 137–141.
37. O’Brien · 2002
38. Relation between molecular force calculation and observed strengths of enamel-metal interfaces10.1111/j.1151-2916.1964.tb14631.x ↗
39. ESCA study on dental alloy surfaces modified by Ga–Sn alloy10.1177/00220345920710061101 ↗
40. Porcelain adherence vs. force to failure for palladium–gallium alloys: a critique of metal–ceramic bond testing10.1016/S0109-5641(98)00017-7 ↗
41. Influence of pH on slow crack growth of dental porcelains10.1016/j.dental.2007.10.001 ↗
42. Powers · 2006
43. Rosenstiel · 1988 · vol. 22
44. Bonding brackets to porcelain—in vitro study10.1590/S0103-64402002000300010 ↗
45. Comparison of bond strength of a pressed ceramic fused to metal versus feldspathic porcelain fused to metal10.1111/j.1532-849X.2005.00052.x ↗
46. Bonding ceramic to metal: a comparison using shear test
47. Abrasion of human enamel by different dental ceramics in vitro10.1177/00220345910700031301 ↗
48. Study of the bond between gold alloys and porcelain10.1177/00220345620410062101 ↗
49. Fracture surface characterization of clinically failed all-ceramic crowns10.1177/00220345940730120601 ↗
50. Nature of attachment forces in porcelain-gold systems10.1177/00220345680470050301 ↗
51. Yamamoto · 1988
52. Investigation of a dental gold alloy and its ceramic bonding
53. Fracture toughness of dental porcelains evaluated by IF, SCF, and SEPB methods10.1111/j.1551-2916.2005.00334.x ↗