A low dimensional surrogate model for a fast estimation of strain in the thrombus during a thrombectomy procedure
Source abstract
Abstract
Background Intra-arterial thrombectomy is the main treatment for acute ischemic stroke due to large vessel occlusions and can consist in mechanically removing the thrombus with a stent-retriever. A cause of failure of the procedure is the fragmentation of the thrombus and formation of micro-emboli, difficult to remove. This work proposes a methodology for the creation of a low-dimensional surrogate model of the mechanical thrombectomy procedure, trained on realizations from high-fidelity simulations, able to estimate the evolution of the maximum first principal strain in the thrombus. Method A parametric finite-element model was created, composed of a tapered vessel, a thrombus, a stent-retriever and a catheter. A design of experiments was conducted to sample 100 combinations of the model parameters and the corresponding thrombectomy simulations were run and post-processed to extract the maximum first principal strain in the thrombus during the procedure. Then, a surrogate model was built with a combination of principal component analysis and Kriging. Results The surrogate model was chosen after a sensitivity analysis on the number of principal components and was tested with 10 additional cases. The model provided predictions of the strain curves with correlation above 0.9 and a maximum error of 28%, with an error below 20% in 60% of the test cases. Conclusions The surrogate model provides nearly instantaneous estimates and constitutes a valuable tool for evaluating the risk of thrombus rupture during pre-operative planning for the treatment of acute ischemic stroke.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Elasticity and Material Modeling · Model Reduction and Neural Networks · Blood properties and coagulation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Stroke etiology and thrombus computed tomography characteristics in patients with acute ischemic stroke: a mr clean registry substudy10.1161/STROKEAHA.119.027749 ↗
2. Impact of the internal carotid artery morphology on in silico stent-retriever thrombectomy outcome10.3389/fmedt.2021.719909 ↗
3. Pearson correlation coefficient
4. Per-pass analysis of thrombus composition in patients with acute ischemic stroke undergoing mechanical thrombectomy10.1161/STROKEAHA.118.023419 ↗
5. Thrombus imaging characteristics and outcomes in acute ischemic stroke patients undergoing endovascular treatment10.1161/STROKEAHA.118.024247 ↗
6. Blood clot fracture properties are dependent on red blood cell and fibrin content10.1016/j.actbio.2021.03.052 ↗
7. García-González · 2020
8. Design of computer experiments: a review10.1016/j.compchemeng.2017.05.010 ↗
9. Discussion paper analysis of variance - why it is more important than ever, Ann
10. Quantitative 3D analysis of tissue damage in a rat model of microembolization10.1016/j.jbiomech.2021.110723 ↗
11. Contribution 1/10 singular value decomposition and least squares
12. Endovascular thrombectomy after large-vessel ischaemic stroke: a meta-analysis of individual patient data from five randomised trials10.1016/S0140-6736(16)00163-X ↗
13. Risk of thrombus fragmentation during endovascular stroke treatment10.3174/ajnr.A5105 ↗
14. Endovascular stroke therapy focused on stent retriever thrombectomy and direct clot aspiration: historical review and modern application10.3340/jkns.2016.0809.005 ↗
15. Keane · 2008
16. A tabulated formulation of hyperelasticity with rate effects and damage10.1007/s00466-006-0150-x ↗
17. Biomechanics and hemodynamics of stent-retrievers10.1177/0271678X20916002 ↗
18. Extending classical surrogate modelling to high dimensions through supervised dimensionality reduction: a data-driven approach10.1615/Int.J.UncertaintyQuantification.2020031935 ↗
19. Efficient dimension reduction and surrogate-based sensitivity analysis for expensive models with high-dimensional outputs10.1016/j.ress.2019.106725 ↗
20. A deep learning approach to estimate stress distribution: a fast and accurate surrogate of finite-element analysis10.1098/rsif.2017.0844 ↗
21. A feasibility study of deep learning for predicting hemodynamics of human thoracic aorta10.1016/j.jbiomech.2019.109544 ↗
22. On the limited memory BFGS method for large scale optimization10.1007/BF01589116 ↗
23. LS-Dyna Theory Manual r · 2019 · 11261
24. Study on the accuracy of structural and FSI heart valves simulations10.1007/s13239-018-00373-3 ↗
25. Applicability assessment of a stent-retriever thrombectomy finite-element model10.1098/rsfs.2019.0123 ↗
26. The first virtual patient-specific thrombectomy procedure10.1016/j.jbiomech.2021.110622 ↗
27. Applicability analysis to evaluate credibility of an in silico thrombectomy procedure10.1016/j.jbiomech.2021.110631 ↗
28. Bridging finite element and machine learning modeling: stress prediction of arterial walls in atherosclerosis10.1115/1.4043290 ↗
29. Principal component analysis and sparse polynomial chaos expansions for global sensitivity analysis and model calibration: application to urban drainage simulation10.1016/j.ress.2019.106737 ↗
30. A clinical perspective on endovascular stroke treatment biomechanics10.1016/j.jbiomech.2021.110694 ↗
31. Modeling acute ischemic stroke recanalization through cyclic aspiration10.1016/j.jbiomech.2021.110721 ↗
32. Real-time biomechanical modeling of the liver using Machine Learning models trained on Finite Element Method simulations10.1016/j.eswa.2019.113083 ↗
33. Cerebrovascular geometry in the anterior circulation: an analysis of diameter, length and the vessel taper10.1136/neurintsurg-2012-010314 ↗
34. Nonintrusive uncertainty quantification for automotive crash problems with VPS/Pamcrash10.1016/j.finel.2021.103556 ↗
35. Time is brain - Quantified10.1161/01.STR.0000196957.55928.ab ↗
36. Rupture of blood clots: mechanics and pathophysiology10.1126/sciadv.abc0496 ↗
37. In silico clinical trials: how computer simulation will transform the biomedical industry10.18203/2349-3259.ijct20161408 ↗