Design and characterization of 3-D printed hydrogel lattices with anisotropic mechanical properties
Source abstract
Abstract
The goal of this study was to design, fabricate, and characterize hydrogel lattice structures with consistent, controllable, anisotropic mechanical properties. Lattices, based on three unit-cell types (cubic, diamond, and vintile), were printed using stereolithography (SLA) of polyethylene glycol diacrylate (PEGDA). To create structural anisotropy in the lattices, unit cell design files were scaled by a factor of two in one direction in each layer and then printed. The mechanical properties of the scaled lattices were measured in shear and compression and compared to those of the unscaled lattices. Two apparent shear moduli of each lattice were measured by dynamic shear tests in two planes: (1) parallel and (2) perpendicular to the scaling direction, or cell symmetry axis. Three apparent Young's moduli of each lattice were measured by compression in three different directions: (1) the "build" direction or direction of added layers, (2) the scaling direction, and (3) the unscaled direction perpendicular to both scaling and build directions. For shear deformation in unscaled lattices, the apparent shear moduli were similar in the two perpendicular directions. In contrast, scaled lattices exhibit clear differences in apparent shear moduli. In compression of unscaled lattices, apparent Young's moduli were independent of direction in cubic and vintile lattices; in diamond lattices Young's moduli differed in the build direction, but were similar in the other two directions. Scaled lattices in compression exhibited additional differences in apparent Young's moduli in the scaled and unscaled directions. Notably, the effects of scaling on apparent modulus differed between each lattice type (cubic, diamond, or vintile) and deformation mode (shear or compression). Scaling of 3D-printed, hydrogel lattices may be harnessed to create tunable, structures of desired shape, stiffness, and mechanical anisotropy, in both shear and compression.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: 3D Printing in Biomedical Research · Additive Manufacturing and 3D Printing Technologies · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Design, optimization, and validation of mechanical properties of different cellular structures for biomedical application10.1007/s00170-019-04671-5 ↗
2. Effects of build direction on the mechanical properties of 3D-printed complete coverage interim dental restorations10.1016/j.prosdent.2015.12.002 ↗
3. Integrating material properties from magnetic resonance elastography into subject-specific computational models for the human brain10.1016/j.brain.2021.100038 ↗
4. Bayly · 2014
5. 3-D bioprinting technologies in tissue engineering and regenerative medicine: current and future trends10.1016/j.gendis.2017.10.002 ↗
6. An anisotropic viscous hyperelastic constitutive law for brain material finite-element modeling10.1007/s12573-012-0055-6 ↗
7. COMSOL Multiphysics® v. 6.0. www.comsol.com. COMSOL AB, Stockholm, Sweden.
8. Coronado · 2011
9. Thermal inkjet printing of tissue engineering and regenerative medicine10.2174/187221112800672949 ↗
10. MR imaging relaxation times of abdominal and pelvic tissues measured in vivo at 3.0 T: preliminary results10.1148/radiol.2303021331 ↗
11. Design and implementation of a MRI compatible and dynamic phantom simulating the motion of a tumor in the liver under the breathing cycle
12. Mechanical and biological characterization of 3D printed lattices10.1089/3dp.2018.0125 ↗
13. Measurements of mechanical anisotropy in brain tissue and implications for transversely isotropic material models of white matter10.1016/j.jmbbm.2013.04.007 ↗
14. Viscoelastic characterization of soft tissue-mimicking gelatin phantoms using indentation and magnetic resonance elastography
15. 2020
16. Estimation of anisotropic material properties of soft tissue by MRI of ultrasound-induced shear waves10.1115/1.4046127 ↗
17. Anisotropic composite material phantom to improve skeletal muscle characterization using magnetic resonance elastography10.1016/j.jmbbm.2018.09.032 ↗
18. Axially – and torsionally-polarized radially converting shear wave MRE in an anisotropic phantom made via Embedded Direct Ink Writing10.1016/j.jmbbm.2021.104483 ↗
19. Laser assisted bioprinting of engineered tissue with high cell density and microscale organization10.1016/j.biomaterials.2010.05.055 ↗
20. Designing biomaterials for 3D printing10.1021/acsbiomaterials.6b00121 ↗
21. Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels10.1126/sciadv.1500758 ↗
22. Head impact accelerations for brain strain-related responses in contact sports: a model-based investigation10.1007/s10237-014-0562-z ↗
23. Correlation of an FE model of the human head with local brain motion--consequences for injury prediction
24. Magnetic resonance elastography of the brain10.1016/j.neuroimage.2007.08.030 ↗
25. Kurtz · 2013
26. 3D printing of hydrogels: rational design strategies and emerging biomedical applications10.1016/j.mser.2020.100543 ↗
27. A simple and realistic tissue-equivalent breast phantom for MRI10.1002/(SICI)1522-2586(199912)10:6<968::AID-JMRI9>3.0.CO;2-0 ↗
28. Effect of the build orientation on the mechanical behavior of polymers by stereolithography
29. Magnetic resonance elastography: non-invasive mapping of tissue elasticity10.1016/S1361-8415(00)00039-6 ↗
30. 2020
31. McNeel · 2020
32. Magnetic resonance elastography by direct visualization of propagating acoustic strain waves10.1126/science.7569924 ↗
33. Magnetic resonance elastography of the brain10.1016/j.mric.2014.05.001 ↗
34. Viscoelastic properties of soft gels: comparison of magnetic resonance elastography and dynamic shear testing in the shear wave regime10.1088/0031-9155/56/19/014 ↗
35. Development of a finite element model for blast brain injury and the effects of CSF cavitation10.1007/s10439-012-0519-2 ↗
36. Combining MR elastography and diffusion tensor imaging for the assessment of anisotropic mechanical properties: a phantom study10.1002/jmri.23797 ↗
37. Hydrogel-based bioinks for 3D bioprinting in tissue regeneration10.3389/fmats.2020.00076 ↗
38. Measurement of anisotropic mechanical properties in porcine brain white matter ex vivo using magnetic resonance elastography10.1016/j.jmbbm.2017.11.045 ↗
39. Multiscale homogenization method for the prediction of elastic properties of fiber-reinforced composites10.1016/j.ijsolstr.2020.08.009 ↗
40. Multi-excitation magnetic resonance elastography of the brain: wave propagation in anisotropic white matter10.1115/1.4046199 ↗
41. Diffuse Degeneration of the Cerebral White Matter in severe dementia following head injury10.1136/jnnp.19.3.163 ↗
42. Shearing of nerve fibres as A cause of brain damage due to head injury A pathological study of twenty cases
43. Mechanical considerations of bioprinted tissue10.3389/fmech.2020.568726 ↗
44. Bioprintability: physiomechanical and biological requirements of materials for 3D bioprinting processes10.3390/polym12102262 ↗
45. Ultralight, ultrastiff mechanical metamaterials10.1126/science.1252291 ↗