journal article·2023-04Open access

A flexible design framework to design graded porous bone scaffolds with adjustable anisotropic properties

K. Cheikho, J.F. Ganghoffer, A. Baldit, E. Labbé, S. Alix, H. Kerdjoudj, C. Mauprivez, A. Lebée, C. Laurent

Abstract

Since the success of bone regenerative medicine depends on scaffold morphological and mechanical properties, numerous scaffolds designs have been proposed in the last decade, including graded structures that are suited to enhance tissue ingrowth. Most of these structures are based either on foams with a random pore definition, or on the periodic repetition of a unit cell (UC). These approaches are limited by the range of target porosities and obtained effective mechanical properties, and do not permit to easily generate a pore size gradient from the core to the periphery of the scaffold. In opposition, the objective of the present contribution is to propose a flexible design framework to generate various three-dimensional (3D) scaffolds structures including cylindrical graded scaffolds from the definition of a UC by making use of a non-periodic mapping. Conformal mappings are firstly used to generate graded circular cross-sections, while 3D structures are then obtained by stacking the cross-sections with or without a twist between different scaffold layers. The effective mechanical properties of different scaffold configurations are presented and compared using an energy-based efficient numerical method, pointing out the versatility of the design procedure to separately govern longitudinal and transverse anisotropic scaffold properties. Among these configurations, a helical structure exhibiting couplings between transverse and longitudinal properties is proposed and permits to extend the adaptability of the proposed framework. In order to investigate the capacity of common additive manufacturing techniques to fabricate the proposed structures, a subset of these configurations is elaborated using a standard SLA setup, and subjected to experimental mechanical testing. Despite observed geometric differences between the initial design and the actual obtained structures, the effective properties are satisfyingly predicted by the proposed computational method. Promising perspectives are offered concerning the design of self-fitting scaffolds with on-demand properties depending on the clinical application.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Cellular and Composite Structures · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. Additive manufacturing and mechanical characterization of graded porosity scaffolds designed based on triply periodic minimal surface architectures10.1016/j.jmbbm.2016.05.027 ↗
2. Effect of pore architecture on oxygen diffusion in 3D scaffolds for tissue engineering10.1115/1.4002429 ↗
3. Permeability and fluid flow-induced wall shear stress in bone scaffolds with TPMS and lattice architectures: a CFD analysis10.1016/j.euromechflu.2019.09.015 ↗
4. Homogenization of quasi-periodic structures10.1115/1.2202158 ↗
5. Higher-gradient and micro-inertia contributions on the mechanical response of composite beam structures10.1016/j.ijengsci.2020.103318 ↗
6. Challenges on optimization of 3D-printed bone scaffolds10.1186/s12938-020-00810-2 ↗
7. Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants10.1016/j.actbio.2009.11.011 ↗
8. Effects of scaffold architecture on cranial bone healing10.1016/j.ijom.2013.05.008 ↗
9. Russian doll deployable meta-implants: fusion of kirigami, origami, and multi-stability10.1016/j.matdes.2020.108624 ↗
10. Effects of bone substitute architecture and surface properties on cell response, angiogenesis, and structure of new bone10.1039/C7TB00741H ↗
11. Pre-vascularization of bone tissue-engineered constructs10.1186/scrt307 ↗
12. An elasto-mechanical unfeelability cloak made of pentamode metamaterials10.1038/ncomms5130 ↗
13. A review on fabricating tissue scaffolds using vat photopolymerization10.1016/j.actbio.2018.05.010 ↗
14. Morphological validation of a novel bi-material 3D-printed model of temporal bone for middle ear surgery education10.21037/atm.2020.03.14 ↗
15. An advanced method to design graded cylindrical scaffolds with versatile effective cross-sectional mechanical properties10.1016/j.jmbbm.2021.104887 ↗
16. 3D printed Ti6Al4V bone scaffolds with different pore structure effects on bone ingrowth10.1186/s13036-021-00255-8 ↗
17. A multifunctional porous scaffold with capacities of minimally invasive implantation, self-fitting and drug delivery10.1016/j.mtchem.2016.11.004 ↗
18. Permeability analysis of scaffolds for bone tissue engineering10.1016/j.jbiomech.2012.01.019 ↗
19. Additive manufacturing of PLA-based scaffolds intended for bone regeneration and strategies to improve their biological properties10.1515/epoly-2020-0046 ↗
20. The demonstration of conformal maps with two-dimensional foams10.1088/0143-0807/25/3/010 ↗
21. Predictive strain-gradient homogenization of a pantographic material with compliant junctions10.1016/j.jmps.2021.104773 ↗
22. Fernandes · 2020
23. A variational approach of homogenization of heterogeneous materials towards second gradient continua10.1016/j.mechmat.2021.103743 ↗
24. Current concepts in scaffolding for bone tissue engineering
25. Biomechanics of cellular solids10.1016/j.jbiomech.2004.09.027 ↗
26. Identification of couple-stress moduli of vertebral trabecular bone based on the 3D internal architectures10.1016/j.jmbbm.2015.06.036 ↗
27. Optimal internal architectures of femoral bone based on relaxation by homogenization and isotropic material design10.1016/j.mechrescom.2016.06.007 ↗
28. Hydrogel-based platforms for the regeneration of osteochondral tissue and intervertebral disc10.3390/polym4031590 ↗
29. BMP2 genetically engineered MSCs and EPCs promote vascularized bone regeneration in rat critical-sized calvarial bone defects
30. Polymeric scaffolds used as prosthetics for regenerating tendons
31. The correlation of pore morphology, interconnectivity and physical properties of 3D ceramic scaffolds with bone ingrowth10.1016/j.biomaterials.2008.10.056 ↗
32. A comparative study of shear stresses in collagen-glycosaminoglycan and calcium phosphate scaffolds in bone tissue-engineering bioreactors10.1089/ten.tea.2008.0204 ↗
33. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
34. Computing the effective bulk and normal to shear properties of common two-dimensional architectured materials10.1016/j.commatsci.2018.07.044 ↗
35. Mechanical performance of auxetic meta-biomaterials10.1016/j.jmbbm.2020.103658 ↗
36. Resorbable construct for subtotal cranial vault remodeling10.1097/SAP.0000000000000776 ↗
37. 4D printing of origami structures for minimally invasive surgeries using functional scaffold10.3390/app11010332 ↗
38. Second order homogenization of quasi-periodic structures10.15625/0866-7136/13498 ↗
39. Contribution of endothelial cells to human bone-derived cells expansion in coculture10.1089/ten.tea.2011.0710 ↗
40. Variability and anisotropy of mechanical behavior of cortical bone in tension and compression10.1016/j.jmbbm.2013.02.021 ↗
41. Li · 2006
42. 3D-Printed Ti6Al4V scaffolds with graded triply periodic minimal surface structure for bone tissue engineering10.1007/s11665-021-05580-z ↗
43. Stiffness and strength tailoring of cobalt chromium graded cellular structures for stress-shielding reduction10.1016/j.matdes.2016.11.090 ↗
44. A novel method for biomaterial scaffold internal architecture design to match bone elastic properties with desired porosity10.1016/j.jbiomech.2003.09.029 ↗
45. An analytical and numerical framework for evaluating axial compression of finite dimensional metallic foams by generalization of buckling effects10.1080/15376494.2016.1227508 ↗
46. Functionally graded porous scaffolds in multiple patterns: new design method, physical and mechanical properties10.1016/j.matdes.2018.09.053 ↗
47. Engineering bone: challenges and obstacles10.1111/j.1582-4934.2005.tb00338.x ↗
48. Homogenized strain gradient remodeling model for trabecular bone microstructures10.1007/s00161-019-00746-6 ↗
49. Mathematically defined tissue engineering scaffold architectures prepared by stereolithography10.1016/j.biomaterials.2010.05.068 ↗
50. Mesenchymal stem cells: roles and relationships in vascularization10.1089/ten.teb.2013.0541 ↗
51. An emerging class of hyperbolic lattice exhibiting tunable elastic properties and impact absorption through chiral twisting10.1016/j.eml.2020.100869 ↗
52. New method of numerical homogenization of functionally graded materials10.1016/j.prostr.2017.07.148 ↗
53. Micro-structure in linear elasticity10.1007/BF00248490 ↗
54. Porous scaffold internal architecture design based on minimal surfaces: a compromise between permeability and elastic properties10.1016/j.matdes.2017.04.009 ↗
55. Nanotechnology and tissue engineering: the scaffold based approach
56. In vitro and in vivo characteristics of PCL scaffolds with pore size gradient fabricated by a centrifugation method10.1016/j.biomaterials.2006.11.024 ↗
57. Permeability quantification of porous polymer scaffold for bone tissue engineering
58. Patrick · 1998
59. Tissue engineering technology and its possible applications in oral and maxillofacial surgery10.1016/j.bjoms.2013.03.005 ↗
60. A review of rapid prototyping techniques for tissue engineering purposes10.1080/07853890701881788 ↗
61. Optimization of bone scaffold porosity distributions10.1038/s41598-019-44872-2 ↗
62. Biomaterials for bone tissue engineering scaffolds: a review10.1039/C9RA05214C ↗
63. Mechanical anisotropy of titanium scaffolds10.1515/cdbme-2017-0127 ↗
64. On the permeability of TPMS scaffolds10.1016/j.jmbbm.2020.103932 ↗
65. Shape memory effect in 3D-printed scaffolds for self-fitting implants10.1016/j.eurpolymj.2017.06.011 ↗
66. Design criteria for a printed tissue engineering construct: a mathematical homogenization approach10.1016/j.jtbi.2009.03.037 ↗
67. Three-dimensional plotted scaffolds with controlled pore size gradients: effect of scaffold geometry on mechanical performance and cell seeding efficiency10.1016/j.actbio.2010.11.003 ↗
68. Applications of 3D printed bone tissue engineering scaffolds in the stem cell field10.1016/j.reth.2021.01.007 ↗
69. A review of 3D printing in dentistry: technologies, affecting factors, and applications10.1155/2021/9950131 ↗
70. The effect of pore size and porosity on mechanical properties and biological response of porous titanium scaffolds10.1016/j.msec.2017.03.249 ↗
71. 3D printing of bone tissue engineering scaffolds
72. 3D Printing of large-scale and highly porous biodegradable tissue engineering scaffolds from poly(trimethylene-carbonate) using two-photon-polymerization10.1088/1758-5090/abb539 ↗
73. 4D printing auxetic metamaterials with tunable, programmable, and reconfigurable mechanical properties10.1002/adfm.202004226 ↗
74. Topology optimization and de-homogenization of graded lattice structures based on asymptotic homogenization10.1016/j.compstruct.2021.114633 ↗
75. Porous scaffold design using the distance field and triply periodic minimal surface models10.1016/j.biomaterials.2011.07.019 ↗
76. Reverse freeze casting: a new method for fabricating highly porous titanium scaffolds with aligned large pores10.1016/j.actbio.2012.03.020 ↗
77. Bone tissue regeneration: the role of scaffold geometry10.1039/C4BM00291A ↗
78. Functionally graded scaffolds with programmable pore size distribution based on triply periodic minimal surface fabricated by selective laser melting10.3390/ma13215046 ↗