Material extrusion of thermoplastic acrylic for intraoral devices: Technical feasibility and evaluation
Source abstract
Abstract
With global demand for 3D printed medical devices on the rise, the search for safer, inexpensive, and sustainable methods is timely. Herein, we assessed the practicality of the material extrusion process for acrylic denture bases of which successful outcomes can be extended to implant surgical guides, orthodontic splints, impression trays, record bases and obturators for cleft palates or other maxillary defects. Representative materials comprising denture prototypes and test samples were designed and built with in-house polymethylmethacrylate filaments using varying print directions (PDs), layer heights (LHs) and reinforcements (RFs) with short glass fiber. The study undertook a comprehensive evaluation of the materials to determine their flexural, fracture, and thermal properties. Additional analyses for tensile and compressive properties, chemical composition, residual monomer, and surface roughness (Ra) were completed for parts with optimum parameters. Micrographic analysis of the acrylic composites revealed adequate fiber-matrix compatibility and predictably, their mechanical properties improved simultaneously with RFs and decreased LHs. Fiber reinforcement also improved the overall thermal conductivity of the materials. Ra, on the other hand, improved visibly with decreased RFs and LHs and the prototypes were effortlessly polished and characterized with veneering composites to mimic gingival tissues. In terms of chemical stability, the residual methyl methacrylate monomer contents are well below standards threshold for biological reactions. Notably, 5 vol% acrylic composites built with 0.05 mm LH in 0° on z-axis produced optimum properties that are superior to those of conventional acrylic, milled acrylic and 3D printed photopolymers. Finite element modeling successfully replicated the tensile properties of the prototypes. It may well be argued that the material extrusion process is cost-effective; however, the speed of manufacturing could be longer than that of established methods. Although the mean Ra is within an acceptable range, mandatory manual finishing and aesthetic pigmentation are required for long-term intraoral use. At a proof-of-concept level, it is evident that the material extrusion process can be applied to build inexpensive, safe, and robust thermoplastic acrylic devices. The broad outcomes of this novel study are equally worthy of academic reflection, and further translation to the clinic.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Additive Manufacturing and 3D Printing Technologies · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. Comparative evaluation of surface roughness and hardness of 3D printed resins10.3390/ma15196822 ↗
2. An investigation of the burning mouth sensation related to the wearing of acrylic dentures
3. The burning mouth sensation related to the wearing of acrylic dentures - an investigation10.1038/sj.bdj.4806008 ↗
4. Hardness, flexural strength, and flexural modulus comparisons of three differently cured denture base systems10.1111/j.1532-849X.2008.00357.x ↗
5. Biomedical photopolymers in 3D printing10.1108/RPJ-10-2018-0268 ↗
6. Biocompatibility of photopolymers in 3D printing10.1089/3dp.2017.0064 ↗
7. Toxicological assessment of additively manufactured methacrylates for medical devices in dentistry10.1016/j.actbio.2018.08.007 ↗
8. Characterization of the double bond conversion of acrylic resins for 3D printing of dental prostheses
9. Characterization of the double bond conversion of acrylic resins for 3D printing of dental prostheses
10. Chemical characterization of additively manufactured methacrylates for dental devices
11. 2013
12. 2014
13. 2016
14. 2022
15. Surface quality of 3D-printed models as a function of various printing parameters10.3390/ma12121970 ↗
16. Structure-toxicity relationships of acrylic monomers10.1289/ehp.7511141 ↗
17. Photopolymerization in 3D printing10.1021/acsapm.8b00165 ↗
18. Comparison of hardness and surface roughness of two denture bases polymerized by different methods10.5005/jp-journals-10015-1151 ↗
19. Barnett · J. Roy. Stat. Soc. · 1975 · 138
20. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature10.1016/S0109-5641(97)80038-3 ↗
21. D. Brown, Dental materials: biological properties and clinical evaluations, J. Dent. 15(6) 271.10.1016/0300-5712(87)90061-3 ↗
22. Chua · 2015
23. Mechanical characterization of 3D-printed polymers
24. The trends and challenges of fiber reinforced additive manufacturing10.1007/s00170-018-03269-7 ↗
25. Comparison of the flexural and surface properties of milled, 3D-printed, and heat polymerized PMMA resins for denture bases: an in vitro study10.2186/jpr.JPR_D_21_00116 ↗
26. 2016
27. Tensile strength of denture base material reinforced with zirconia nanoparticle and glass fibers10.21608/adjg.2018.17192 ↗
28. Strength and surface properties of a 3D-printed denture base polymer10.1111/jopr.13413 ↗
29. Geurtsen · 2009 · 255
30. Osteoblast cell death on methacrylate polymers involves apoptosis10.1002/1097-4636(20011215)57:4<497::AID-JBM1195>3.0.CO;2-U ↗
31. Processing, mechanical characterization, and micrography of 3D-printed short carbon fiber reinforced polycarbonate polymer matrix composite material10.1007/s00170-020-05195-z ↗
32. Homogenized modeling approach for effective property prediction of 3D-printed short fibers reinforced polymer matrix composite material10.1007/s00170-021-08230-9 ↗
33. Hasanov · 2021
34. Hierarchical homogenization and experimental evaluation of functionally graded materials manufactured by the fused filament fabrication process10.1016/j.compstruct.2021.114488 ↗
35. Review on additive manufacturing of multi-material parts: progress and challenges10.3390/jmmp6010004 ↗
36. 2013
37. 2013
38. 2019
39. Toughening of denture base resin with short deformable fibers10.1016/j.compscitech.2008.11.014 ↗
40. Flexural strength of heat-polymerized polymethyl methacrylate denture resin reinforced with glass, aramid, or nylon fibers10.1067/mpr.2001.118564 ↗
41. Release of methyl methacrylate from heat-curved and autopolymerized resins: cytotoxicity testing related to residual monomer10.1111/j.1834-7819.1999.tb00532.x ↗
42. Degree of conversion of bis-acrylic based provisional crown and fixed partial denture materials10.4047/jkap.2008.46.6.639 ↗
43. Surface characteristics of milled and 3D printed denture base materials following polishing and coating: an in-vitro study10.3390/ma13153305 ↗
44. Effects of polishing techniques on the surface roughness of acrylic denture base resins10.1016/j.prosdent.2004.10.002 ↗
45. Evaluation of thermal conductivity and flexural strength properties of poly(methyl methacrylate) denture base material reinforced with different fillers10.1016/j.prosdent.2016.03.006 ↗
46. Lawrence
47. Polymers for 3D printing and customized additive manufacturing10.1021/acs.chemrev.7b00074 ↗
48. Interfacial performance and fracture patterns of 3D printed continuous carbon fiber with sizing reinforced PA6 composites10.1016/j.compositesa.2018.09.001 ↗
49. Mechanical properties of polymethyl methacrylate as denture base material: heat-polymerized vs. 3D-printed—systematic review and meta-analysis of in vitro studies10.3390/biomedicines10102565 ↗
50. Implementation of fused filament fabrication in dentistry10.3390/app11146444 ↗
51. Mazumdar · 2021
52. Toxicological and pharmacological actions of methacrylate monomers I: effects on isolated, perfused rabbit heart10.1002/jps.2600620515 ↗
53. Toxicological and pharmacological actions of methacrylate monomers II: effects on isolated Guinea pig ileum10.1002/jps.2600620804 ↗
54. Toxicological and pharmacological actions of methacrylate monomers III: effects on respiratory and cardiovascular functions of anesthetized dogs10.1002/jps.2600630313 ↗
55. Three-scale asymptotic homogenization of short fiber reinforced additively manufactured polymer composites10.1016/j.compositesb.2020.108269 ↗
56. 3D micro-extrusion of graphene-based active electrodes: towards high-rate AC line filtering performance electrochemical capacitors10.1002/adfm.201304151 ↗
57. 5 - acrylic denture base materials
58. 3D-Printed vs. Heat-polymerizing and autopolymerizing denture base acrylic resins10.3390/ma14195781 ↗
59. How accurate is oral implant installation using surgical guides printed from a degradable and steam-sterilized biopolymer?10.3390/jcm9082322 ↗
60. Comparison of mechanical properties of 3D-printed, CAD/CAM, and conventional denture base materials10.1111/jopr.13175 ↗
61. 9 - thermomechanical and spectroscopic characterization of natural fibre composites
62. [Release and diffusion of methylmethacrylic monomers after the implantation of self curing bone cements. Study on laboratory specimens and animal experiments (author's transl)]10.1007/BF02589727 ↗
63. Chapter 9 - restorative materials: composites and polymers
64. A review of factors that influence the fracture toughness of extrusion-based additively manufactured polymer and polymer composites
65. Shen · 2022
66. Sideridou · 2010
67. 3D printing with polymers: challenges among expanding options and opportunities10.1016/j.dental.2015.09.018 ↗
68. The effect of build orientation on both flexural quasi-static and fatigue behaviours of filament deposited PA6 polymer10.1016/j.ijfatigue.2020.105825 ↗
69. Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites10.1016/j.compositesa.2016.05.032 ↗
70. Tensile strength enhancement of fused filament fabrication printed parts: a review of process improvement approaches and respective impact
71. 17 - mechanical stability of dental materials
72. The future of dental devices is digital10.1016/j.dental.2011.10.014 ↗
73. The anisotropicity of the flexural properties of an occlusal device material processed by stereolithography10.1016/j.prosdent.2016.03.018 ↗
74. Medical applications for 3D printing: current and projected uses
75. Roughness of denture materials: a comparative study