The effect of combined loading cycles on the wear of reverse shoulder joint replacements
Source abstract
Abstract
Wear of polyethylene is a current limitation in the long-term survival of reverse shoulder arthroplasties (RSAs). The purpose of this study was to investigate, for the first time, the influence of a combination of clinically relevant activities of daily living (ADLs) as patterns of motion and loading on the wear of ultra-high molecular-weight polyethylene (UHMWPE) in RSA. This physiological combined cycle, termed "repeated-motion-load", was applied on four new samples of a commercially available reverse shoulder prosthesis for five million cycles using the unique Newcastle Shoulder Wear Simulator. This resulted in a mean wear rate of 12.0 ± 3.9 mm3/million cycles for the UHMWPE components in combination with metallic glenospheres, while the average articulating UHMWPE surface roughness reduced from 692 ± 132 nm Sa to 42 ± 29 nm Sa.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shoulder Injury and Treatment · Shoulder and Clavicle Injuries · Nerve Injury and Rehabilitation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. National joint replacement registry annual report
2. Biomechanics of reverse total shoulder arthroplasty10.1016/j.jse.2014.08.003 ↗
3. Grammont reverse prosthesis: design, rationale, and biomechanics10.1016/j.jse.2004.10.006 ↗
4. Neer Award 2005: the Grammont reverse shoulder prosthesis: results in cuff tear arthritis, fracture sequelae, and revision arthroplasty10.1016/j.jse.2006.01.003 ↗
5. Polyethylene wear in retrieved reverse total shoulder components10.1016/j.jse.2011.03.012 ↗
6. Reverse shoulder arthroplasty as a salvage procedure for failed conventional shoulder replacement due to cuff failure--midterm results10.1007/s00264-010-0990-z ↗
7. A method for wear testing or reverse shoulder arthroplasty systems
8. ISO 14243-1 · 2009
9. ISO 14242-1 · 2014
10. ISO 14242-2 · 2016
11. NeuFlex metacarpophalangeal prostheses tested in vitro10.1243/095441105X9192 ↗
12. A study of the wear of explanted metal-on-metal resurfacing hip prostheses10.1016/j.triboint.2010.04.006 ↗
13. The wear of artificial finger joints using different lubricants in a new finger wear simulator10.1016/S0043-1648(01)00657-3 ↗
14. Wear-induced loss of mass in reversed total shoulder arthroplasty with conventional and inverted bearing materials10.1016/j.jbiomech.2011.11.055 ↗
15. Dry bearings: a survey of materials and factors affecting their performance10.1016/0041-2678(73)90172-3 ↗
16. Wear simulation strategies for reverse shoulder arthroplasty implants10.1177/0954411916642801 ↗
17. Analysis of polyethylene wear of reverse shoulder components: a validated technique and initial clinical results10.1002/jor.23353 ↗
18. Glenohumeral contact forces in reversed anatomy shoulder replacement10.1016/j.jbiomech.2010.05.024 ↗
19. Numerical and experimental investigations for the evaluation of the wear coefficient of reverse total shoulder prostheses10.1016/j.jmbbm.2015.10.007 ↗
20. Observations on retrieved humeral polyethylene components from reverse total shoulder arthroplasty10.1016/j.jse.2010.05.014 ↗
21. National Joint Registry (NJR) for England Wales Northern Ireland and the Isle of Man, 2017. Public and Patient Guide to the NJRs 14th Annual Report, Shoulder Replacement edition, pp. 6–9. 〈https://www.njrreports.org.uk〉.
22. National Joint Registry (NJR) for England Wales Northern Ireland and the Isle of Man, 2018. 15th Annual Report, pp. 156–177. 〈https://www.njrreports.org.uk〉.
23. Shoulder arthroplasty in Germany: 2005–201210.1007/s00402-016-2417-9 ↗
24. Effect of contact area on the wear of ultrahigh molecular weigh tpolyethylene in noncyclic pin-on-disk tests10.1016/j.triboint.2017.04.020 ↗
25. Rate of improvement in clinical outcomes with atomic and reverse total shoulder arthroplasty10.2106/JBJS.16.01387 ↗
26. Grammont inverted total shoulder arthroplasty in the treatment of glenohumeral osteoarthritis with massive rupture of the cuff10.1302/0301-620X.86B3.14024 ↗
27. Evaluation of a hip joint simulator10.1243/0954411991535077 ↗
28. In vitro wear testing of a contemporary design of reverse shoulder prosthesis10.1016/j.jbiomech.2015.07.022 ↗
29. Engineering of a multi-station shoulder simulator10.1177/0954411915611161 ↗
30. A five-station hip joint simulator10.1243/0954411011533535 ↗
31. Wear simulation of reverse total shoulder arthroplasty systems: effect of glenosphere design10.1016/j.jse.2011.10.024 ↗
32. Reverse total shoulder arthroplasty: a review of results according to etiology
33. Elucidating trends in revision reverse total shoulder arthroplasty procedures: a retrieval study evaluating clinical, radiographic, and functional outcomes data10.1016/j.jse.2015.06.004 ↗