journal article·2020-07

Effect of cooling rate on hardness and microstructure of Pd–Ag–In–Sn−Ga alloy during porcelain firing simulation

Hye-Jeong Shin, Yong Hoon Kwon, Hyo-Joung Seol

Publisher page

Abstract

This study examined the effect of the cooling rate on the hardness and its effect on the microstructure during porcelain firing simulation of a Pd-Ag-In-Sn-Ga metal-ceramic alloy. In practice, after each firing step for porcelain bonding, the prosthesis is cooled to room temperature before proceeding to the next firing step. The cooling step is known to allow the hardness of the metal substructure to increase. The aim of the study was to determine whether controlling the cooling rate after each porcelain-firing step increases the hardness of the Pd-Ag-based metal-ceramic alloy. The results showed that the hardness of specimens cooled at a higher cooling rate increased after each firing step compared to specimens cooled at a lower cooling rate (p < 0.05). During cooling after the firing simulation the InPd3-based phase of tetragonal structure precipitated from the Pd-Ag-rich matrix of the face-centered cubic structure. Hardening by cooling at a higher cooling rate after firing was the result of the coherency strains that formed at the interface of the Pd-Ag-rich matrix and the metastable phase based on the InPd3 phase. . The reduced hardness obtained in the specimen cooled at a lower cooling rate after firing resulted from the loss of coherency strains as the fine metastable phases based on the InPd3 phase were transformed into the coarser stable phase with decreased (c/a) of 0.88. This finding revealed that controlling the cooling rate during porcelain firing simulation improves the hardness of the Pd-Ag-In-Sn-Ga metal-ceramic alloy without an additional heat treatment of the alloy.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. In vitro corrosion resistance of high-palladium dental casting alloys10.1016/S0109-5641(99)00037-8 ↗
2. Microstructural changes in grain interior and grain boundary by formation of metastable and stable phases related to age-hardening in an Au-Cu-Ag-Pd alloy10.1557/jmr.2013.77 ↗
3. Hardening reactions in a high-gold content ceramo-metal alloy10.1177/00220345800590110601 ↗
4. A study of some palladium-indium, platinum-indium and platinum-tin alloys10.1016/0022-5088(68)90141-0 ↗
5. Age-hardening behavior in a palladium-base dental porcelain-fused alloy10.1016/1044-5803(90)90008-8 ↗
6. Three distinguishable phase changes during slow-cooling in commercial dental alloys for porcelain bonding10.4012/dmj.6.54 ↗
7. Microstructures and mechanical properties of Co-Cr dental alloys fabricated by three CAD/CAM-based processing techniques10.3390/ma9070596 ↗
8. Effect of ice-quenching after oxidation treatment on hardening of a Pd-Cu-Ga-Zn alloy for bonding porcelain10.1016/j.jmbbm.2017.12.014 ↗
9. Change in hardness of an as-cast and softening heat-treated low-gold-content alloy for bonding porcelain by simulated porcelain firing and its mechanism10.1007/s13404-015-0158-0 ↗
10. Study of Pd-Ag dental alloys: examination of effect of casting porosity on fatigue behaviour and microstructural analysis10.1007/s10856-010-4116-3 ↗
11. Massalski · 1990 · 2271
12. O'Brien · 2002 · 202
13. Statistical power for the two-factor repeated measures ANOVA10.3758/BF03207805 ↗
14. Metal-ceramic alloys in dentistry: a review10.1111/j.1532-849X.2008.00377.x ↗
15. Sakaguchi · 2019 · 219
16. Effect of ice quenching after oxidation with or without vacuum on the hardness of Pd–Ag–Au–In alloy during porcelain firing simulation10.1016/j.jmbbm.2019.03.006 ↗
17. Analysis of repeated measurement data in the clinical trials10.4103/0975-9476.113872 ↗
18. Precipitation behavior of Ag-Pd-In dental alloys10.1023/A:1008937702722 ↗
19. Age-hardening mechanisms in a commercial dental gold alloy containing platinum and palladium10.1177/00220345910700100701 ↗
20. Marginal accuracy of complete crowns made from alternative casting alloys10.1016/S0022-3913(05)80041-1 ↗
21. Isothermal age-hardening behaviour in commercial dental gold alloys containing palladium10.4012/dmj.3.253 ↗
22. Metallurgical structure and microhardness of four new palladium-based alloys10.1111/j.1532-849X.1996.tb00513.x ↗
23. Hardening by cooling rate control and post-firing heat treatment in Pd-Ag-Sn alloy for bonding porcelain10.4012/dmj.2015-189 ↗