journal article·2021-09Open access

Fracture mechanisms in Ti and Co–Cr growing rods and impact on clinical practice

Arnaud Ribesse, Karim Ismail, Maïté Croonenborghs, Nadia Irda, Lotfi Miladi, Pascal J. Jacques, Maryline Mousny, Thomas Pardoen

Abstract

The widely used treatment of early onset scoliosis based on fusionless spinal instrumentation with growing rods suffers from severe complications due to premature rod failure. Only few studies have explored the fracture mechanisms in single rod constructs, while clinical practice urgently needs guidance. The objectives of this study are (i) to determine the failure mechanisms in Ti-6Al-4V alloy, Ti Cp 2 and Co-Cr alloy rods, and (ii) to propose strategies to reduce the risk of rod fracture. For this purpose, seven rods from three patients treated for early onset scoliosis were characterized by preoperative, pre-fracture X-rays and after-fracture X-rays. Fracture surface analysis, performed using scanning electron microscopy, revealed similar failure mechanisms for all rods, independent of composition and diameter. Fracture is caused by fatigue, associated to repeated bending action in the anteroposterior direction. Cracking initiates at multiple sites. Three-point bending fatigue tests on Ti-6Al-4V bent rods confirmed the fracture scenario. A beam bending model indicates that the failure process is controlled by the combination of cyclic vertical and horizontal forces with amplitudes from 200 N to 400 N and from 70 N to 150 N, respectively. Strategies to minimize fracture involve adaptations of material properties and rod geometry to scoliosis characteristics, including sagittal alignment, and spine behavior.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Orthopaedic implants and arthroplasty · Titanium Alloys Microstructure and Properties · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Outcomes of optimal distraction forces and frequencies in growth rod surgery for different types of scoliotic curves: an in silico and in vitro study10.1016/j.jspd.2016.09.047 ↗
2. Quantitative characteristics of consecutive lengthening episodes in early-onset scoliosis (EOS) patients with dual growth rods10.1097/BRS.0000000000002835 ↗
3. Towards a validated patient-specific computational modeling framework to identify failure regions in traditional growing rods in patients with early onset scoliosis10.1016/j.xnsj.2020.100043 ↗
4. Fracture characteristics of fatigued Ti–6Al–4V ELI as an implant material10.1016/S0921-5093(97)00807-1 ↗
5. Complications of growth-sparing surgery in early onset scoliosis10.1097/BRS.0b013e3181f070b5 ↗
6. Dual growing rod technique for the treatment of progressive early-onset scoliosis: a multicenter study10.1097/01.brs.0000175190.08134.73 ↗
7. Growing rod instrumentation in the treatment of early onset scoliosis
8. Shot blasting to increase fatigue resistance
9. Fatigue life determination of plasma nitrided medical grade CoCrMo alloy10.1111/j.1460-2695.2010.01442.x ↗
10. Complications of growing-rod treatment for early-onset scoliosis: analysis of one hundred and forty patients10.2106/JBJS.I.01471 ↗
11. CES EduPack 2019 · 2019
12. CES Selector 2016 · 2015
13. Failure analysis of a Ti6Al4V cementless HIP prosthesis10.1016/j.engfailanal.2006.11.003 ↗
14. Evaluation of shot peening on the fatigue strength of anodized Ti-6Al-4V alloy10.1590/S1516-14392006000100020 ↗
15. Numerical analysis of models of the standard TSRH spinal instrumentation: effect of rod cross-sectional shape10.1080/10255840290008097 ↗
16. Influence of rod contouring on rod strength and stiffness in spine surgery10.3928/01477447-20150603-61 ↗
17. Notch sensitivity of titanium alloy, commercially pure titanium, and stainless steel spinal implants10.1097/00007632-200108010-00008 ↗
18. Donachie · 2000 · vol. 105
19. Technical brief: fatigue dimples10.1007/s11668-009-9228-z ↗
20. Early experience of MAGEC magnetic growing rods in the treatment of early onset scoliosis10.1007/s00586-013-3163-0 ↗
21. Adolescent idiopathic scoliosis: a new classification to determine extent of spinal arthrodesis10.2106/00004623-200108000-00006 ↗
22. A comparison of the fatigue behavior of cast Ti–7.5 Mo with cp titanium, Ti–6Al–4V and Ti–13Nb–13Zr alloys10.1016/j.biomaterials.2004.09.007 ↗
23. The effects of rod contouring on spinal construct fatigue strength10.1097/01.brs.0000224177.97846.00 ↗
24. Fatigue and life prediction for cobalt-chromium stents: a fracture mechanics analysis10.1016/j.biomaterials.2005.10.012 ↗
25. A novel technique for treatment of progressive scoliosis in young children using a 3-hook and 2-screw construct (H3S2) on a single sub-muscular growing rod: surgical technique10.1007/s00586-014-3339-2 ↗
26. H3S2 (3 hooks, 2 screws) construct: a simple growing rod technique for early onset scoliosis10.1007/s00586-012-2379-8 ↗
27. Milella · 2012
28. The fatigue life of contoured cobalt chrome posterior spinal fusion rods10.1243/09544119JEIM763 ↗
29. Mechanical properties of biomedical titanium alloys10.1016/S0921-5093(97)00806-X ↗
30. In vivo distraction force and length measurements of growing rods: which factors influence the ability to lengthen?10.1097/BRS.0b013e31821b8e16 ↗
31. Fatigue crack propagation properties of Ti–6Al–4V in vacuum environments10.1016/j.ijfatigue.2012.02.012 ↗
32. Comparison of fatigue properties and fatigue crack growth rates of various implantable metals10.3390/ma5122981 ↗
33. Otegui · 2014
34. Extreme rejuvenation and softening in a bulk metallic glass10.1038/s41467-018-02943-4 ↗
35. The operative treatment of progressive early onset scoliosis. A preliminary report10.1097/00007632-199008010-00013 ↗
36. Computational and experimental fatigue analysis of contoured spinal rods10.1115/1.4042767 ↗
37. Titanium alloys for biomedical applications10.1016/j.msec.2005.08.032 ↗
38. Cervical stent failure analysis10.1007/s11668-013-9749-3 ↗
39. Qualification of hot isostatic pressing processes
40. Comparison of complications among growing spinal implants10.1097/BRS.0b013e3181c6edd7 ↗
41. Would CoCr rods provide better correctional forces than stainless steel or titanium for rigid scoliosis curves?
42. Implant failure of titanium versus cobalt-chromium growing rods in early-onset scoliosis10.1097/BRS.0000000000001267 ↗
43. The effect of contouring on fatigue strength of spinal rods: is it okay to re-bend and which materials are best?10.1016/j.jspd.2013.08.004 ↗
44. Assessment of symptomatic rod fracture after posterior instrumented fusion for adult spinal deformity10.1227/NEU.0b013e3182672aab ↗
45. Damage analysis of the Harrington rod fracture after scoliosis operation10.1007/BF00379178 ↗
46. Suresh · 1998
47. Measurement of forces generated during distraction of growing-rods in early onset scoliosis10.5312/wjo.v3.i2.15 ↗
48. Fatigue of biomaterials: a review10.1016/S0142-1123(00)00052-9 ↗
49. Growing rod techniques in early-onset scoliosis10.1097/BPO.0b013e3180333eea ↗
50. Risk factors for complications associated with growing-rod surgery for early-onset scoliosis10.1097/BRS.0b013e318288671a ↗
51. Intravital measurements during instrumental correction of idiopathic scoliosis10.3109/ort.1966.37.suppl-93.01 ↗
52. White · 1990
53. Analysis of the fracture mechanism of Ti-6Al-4V alloy rods that failed clinically after spinal instrumentation surgery10.1097/BRS.0000000000000881 ↗
54. Growing rod fractures: risk factors and opportunities for prevention10.1097/BRS.0b013e31822a982f ↗
55. Growing rod concepts: state of the art10.1007/s00586-012-2327-7 ↗
56. Rods in spinal surgery: a review of the literature10.1016/j.spinee.2013.04.022 ↗