journal article·2021-11

Retention of posterior resin bonded fixed dental prostheses with different designs after chewing simulation

Atsuko Tagami, M. Sad Chaar, Sebastian Wille, Junji Tagami, Matthias Kern

Publisher page

Abstract

The aim of this study was to evaluate the effect of different preparation and framework designs on the retention of posterior resin bonded fixed dental prostheses (RBFDPs) made from monolithic zirconia ceramic. Forty-eight caries-free upper premolars and forty-eight upper third molars were used in this study. The teeth were randomly divided into six main groups (n = 8 each) according to the preparation design of two-retainer RBFDPs: narrow or wide rest, combined with 0, 1 or 2 retainer wings. All RBFDPs were milled from monolithic zirconia (KATANA Zirconia ML). They were bonded using Panavia V5 with its corresponding primer, and underwent thermodynamic loading (98 N, 1,200,000 cycles). Retention was evaluated for the surviving RBFDPs in a universal testing machine by means of a debonding test. Failure modes were evaluated using a light microscope. Data was statistically analyzed by Kruskal-Shapiro-Wilk followed by Mann-Whitney with Bonferroni correction for multiple testing. The survival rates after the chewing simulation were 75% (group narrow rest/no retainer wing), 62.5% (group wide rest/no retainer wing) and 100% (the other groups). The mean retention ranged from 31 N to 766 N. Designs with two retainer wings showed significantly higher bond strength than the other designs (p ≤ 0.05). The rest width did not show a significant effect on the retention. Posterior RBFDPs with a modified design (occlusal rest and two retainer wings) exhibited promising durability and retention. Designs with two additional retainer wings should be preferred over designs with one or no retainer wing, irrespectively of the rest width.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dental materials and restorations · Dental Research and COVID-19 · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Zirconia ceramic inlay-retained fixed dental prostheses - first clinical results with a new design10.1016/j.jdent.2010.12.005 ↗
2. Fracture resistance of ceramic and polymer-based occlusal veneer restorations10.1016/j.jmbbm.2017.06.013 ↗
3. Inlay-retained fixed dental prosthesis: a clinical option using monolithic zirconia
4. Endodontic complications following periodontal and prosthetic treatment of patients with advanced periodontal disease10.1902/jop.1984.55.2.63 ↗
5. Load-bearing capacity of all-ceramic three-unit fixed partial dentures with different computer-aided design (CAD)/computer-aided manufacturing (CAM) fabricated framework materials10.1111/j.1600-0722.2008.00551.x ↗
6. Influence of different preparation forms on the loading-bearing capacity of zirconia cantilever FDPs. A laboratory study10.1016/j.jpor.2018.10.010 ↗
7. Durability of resin-zirconia bonds produced using methods available in dental practice
8. In vitro comparison of the load-bearing capacity of ceramic and metal-ceramic resin-bonded fixed dental prostheses in the posterior region10.1016/j.prosdent.2017.03.006 ↗
9. Clinical audit of posterior three-unit fixed-movable resin-bonded fixed partial dentures - a retrospective, preliminary clinical investigation10.1016/j.jdent.2016.12.003 ↗
10. Clinical audit of posterior three-unit fixed-movable resin-bonded fixed partial dentures - a retrospective, preliminary clinical investigation10.1016/j.jdent.2016.12.003 ↗
11. Long-term clinical evaluation of 211 two-unit cantilevered resin-bonded fixed partial dentures10.1016/j.jdent.2014.02.004 ↗
12. Five-year clinical outcome of posterior zirconia ceramic inlay-retained FDPs with a modified design10.1016/j.jdent.2015.11.001 ↗
13. All-ceramic inlay-retained fixed dental prostheses: an update
14. Dynamic fatigue and fracture resistance of non-retentive all-ceramic full-coverage molar restorations. Influence of ceramic material and preparation design10.1016/j.dental.2010.01.011 ↗
15. Effect of surface modifications on the bond strength of zirconia ceramic with resin cement resin10.1016/j.dental.2016.02.001 ↗
16. Comparison of fracture toughness measurements for zirconia materials using two test methods10.4012/dmj.2018-361 ↗
17. Bonding to oxide ceramics - laboratory testing versus clinical outcome10.1016/j.dental.2014.06.007 ↗
18. Fifteen-year survival of anterior all-ceramic cantilever resin-bonded fixed dental prostheses10.1016/j.jdent.2016.11.003 ↗
19. Ten-year outcome of zirconia ceramic cantilever resin-bonded fixed dental prostheses and the influence of the reasons for missing incisors10.1016/j.jdent.2017.07.003 ↗
20. Wear of composite resin veneering materials in a dual-axis chewing simulator10.1046/j.1365-2842.1999.00416.x ↗
21. Bonding to zirconia ceramic: adhesion methods and their durability10.1016/S0109-5641(98)00011-6 ↗
22. Effect of primer treatment on bonding of resin cements to zirconia ceramic10.1016/j.dental.2009.11.159 ↗
23. Durability of resin bonding to zirconia ceramic using different primers
24. Bond strength of adhesive luting systems to human dentin and their durability
25. Current status of zirconia restoration10.1016/j.jpor.2013.09.001 ↗
26. Anterior cantilever resin-bonded fixed dental prostheses: a review of the literature10.1111/jopr.12555 ↗
27. Bond strength of a new generation of universal bonding systems to zirconia ceramic10.1016/j.jmbbm.2016.04.045 ↗
28. A systematic review of the survival and complication rates of resin-bonded bridges after an observation period of at least 5 years10.1111/j.1600-0501.2007.01527.x ↗
29. Veneered zirconia inlay-retained fixed dental prostheses: 10-Year results from a prospective clinical study10.1016/j.jdent.2017.06.008 ↗
30. Tooth surface treatment strategies for adhesive cementation10.4047/jap.2017.9.2.85 ↗
31. Influence of restoration thickness and dental bonding surface on the fracture resistance of full-coverage occlusal veneers made from lithium disilicate ceramic10.1016/j.dental.2015.04.017 ↗
32. Inlay-retained cantilever fixed dental prostheses to substitute a single premolar: impact of zirconia framework design after dynamic loading10.1111/eos.12134 ↗
33. Fracture strength of lithium disilicate crowns compared to polymer-infiltrated ceramic-network and zirconia reinforced lithium silicate crowns10.1016/j.jmbbm.2017.06.025 ↗
34. The effect of curing conditions on the dentin bond strength of two dual-cure resin cements10.1016/j.jpor.2016.12.012 ↗
35. Ten-year survival and chipping rates and clinical quality grading of zirconia-based fixed dental prostheses10.1007/s00784-018-2378-1 ↗
36. A new design for all-ceramic inlay-retained FPDs. A report of two cases
37. Fracture strength of all-ceramic posterior inlay-retained fixed partial dentures10.1016/j.dental.2006.12.006 ↗