journal article·2022-09

Promoted mechanical properties and functionalities via Ta–tailored Ti–Au–Cr shape memory alloys towards biomedical applications

Wan-Ting Chiu, Kota Fuchiwaki, Akira Umise, Masaki Tahara, Tomonari Inamura, Hideki Hosoda

Publisher page

Abstract

In view of the urgent demands of shape memory alloys (SMAs) for biomedical applications due to the world population aging issue, the mechanical properties and functionalities of the biocompatible Ti-Au-Cr-based SMAs, which are tailored by Ta additions, have been developed in this study. The quaternary SMAs were successfully manufactured by physical metallurgy techniques and their mechanical properties and functionalities were examined. In the continuous tensile tests, it was found that the correlation between the yielding strength and phase stability followed a typical trend of mechanical behavior of SMAs, showing the lowest yielding strength at the metastable β-parent phase. Functional mappings between the alloy strength and elongation revealed that compared to the Ta-free specimen, the ductility was promoted 50% while the strength remained intact through the 4 at.% introduction of Ta. Slight shape recovery was observed in the cyclic loading-unloading tensile tests during the unloading process and the highest shape recovery was found in the Ti-4 at.% Au-5 at.% Cr-4 at.% Ta specimen. This indicates that the 4 at.% Ta tailored Ti-Au-Cr SMAs could be a promising material for biomedical applications.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Shape Memory Alloy Transformations · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. General approach to phase stability and elastic properties of β-type Ti-alloys using electronic parameters10.1016/j.scriptamat.2006.04.022 ↗
2. Shape memory properties of Ti–Nb–Mo biomedical alloys10.1016/j.actamat.2010.04.013 ↗
3. Chromium as an essential nutrient for humans10.1006/rtph.1997.1136 ↗
4. A new look at biomedical Ti-based shape memory alloys10.1016/j.actbio.2012.01.018 ↗
5. Effect of oxygen content on the mechanical properties and plastic deformation mechanisms in the TWIP/TRIP Ti–12Mo alloy
6. A β-titanium alloy with extra high strain-hardening rate: design and mechanical properties10.1016/j.scriptamat.2015.11.020 ↗
7. Shape memory behavior of Ti–Ta and its potential as a high-temperature shape memory alloy10.1016/j.actamat.2008.10.041 ↗
8. Novel β-TiTaAl alloys with excellent cold workability and a stable high-temperature shape memory effect10.1016/j.scriptamat.2011.03.004 ↗
9. Mechanical behavior and microstructural analysis of NiTi-40Au shape memory alloys exhibiting work output above 400 °C10.1016/j.intermet.2017.03.005 ↗
10. An overview of high-entropy alloys as biomaterials10.3390/met11040648 ↗
11. Phase constitution and mechanical property of Ti-Cr and Ti-Cr-Sn alloys containing 3D transition metal elements
12. Effect of 3d transition metal additions on the phase constituent, mechanical properties, and shape memory effect of near–eutectoid Ti–4Au biomedical alloys10.1016/j.jallcom.2020.157599 ↗
13. Investigations of effects of intermetallic compound on the mechanical properties and shape memory effect of Ti–Au–Ta biomaterials10.3390/ma14195810 ↗
14. Enhancement of mechanical properties and shape memory effect of Ti–Cr–based alloys via Au and Cu modifications10.1016/j.jmbbm.2021.104707 ↗
15. Enhancement of the shape memory effect by the introductions of Cr and Sn into the β–Ti alloy towards the biomedical applications10.1016/j.jallcom.2021.160088 ↗
16. Evaluations of mechanical properties and shape memory behaviors of the aging–treated Ti–Au–Mo alloys10.1016/j.matchemphys.2021.124775 ↗
17. Influence of the precipitates on the shape memory effect and superelasticity of the near–eutectoid Ti–Au–Fe alloy towards biomaterial applications10.1016/j.intermet.2021.107180 ↗
18. Effect of Cr additions on the phase constituent, mechanical properties, and shape memory effect of near–eutectoid Ti–4Au towards the biomaterial applications10.1016/j.jallcom.2021.159037 ↗
19. Investigations of mechanical properties and deformation behaviors of the Cr modified Ti–Au shape memory alloys10.1016/j.jallcom.2021.163134 ↗
20. Enhancement of the superelastic behavior of the Ti–Au–Cr–based shape memory alloys via the manipulations of annealing–treatments and Ta additions10.1016/j.msea.2022.143312 ↗
21. Corrosion evaluation of gold-based dental alloys10.1177/00220345850640051401 ↗
22. Microstructure and shape memory effect of Ti–20Zr–10Nb alloy10.1016/j.msea.2009.08.063 ↗
23. An overview of nitinol medical applications10.1016/S0921-5093(99)00294-4 ↗
24. Fukui
25. Biocompatibility of Ti-alloys for long-term implantation10.1016/j.jmbbm.2012.11.014 ↗
26. Synthesis and phase transformations of beta metastable Ti-based alloys containing biocompatible Ta, Mo and Fe beta-stabilizer elements10.1002/adem.200600106 ↗
27. Population aging and the sustainability of the welfare state
28. Gold nanoparticles: a new X-ray contrast agent10.1259/bjr/13169882 ↗
29. {332}<113> mechanical twinning in metastable β phase titanium alloys and alloy design
30. Transmission electron microscopic observations of mechanical twinning in metastable beta titanium alloys10.1007/BF02650122 ↗
31. Deformation behaviour of retained β phase inβ-eutectoid Ti-Cr alloys10.1007/BF01106518 ↗
32. Effect of plastic deformation modes on tensile properties of beta titanium alloys10.2320/matertrans1960.27.496 ↗
33. Plastic deformation mode of retained β phase in β–eutectoid Ti–Fe alloys10.1007/BF01117366 ↗
34. Effect of cold-rolling rate on texture in Ti-Mo-Al-Zr shape memory alloy10.4028/www.scientific.net/MSF.738-739.262 ↗
35. Deformation texture of Ti-26mol%Nb-3mol%Al β-titanium alloy10.4028/www.scientific.net/MSF.706-709.1899 ↗
36. A review of shape memory alloy research, applications and opportunities10.1016/j.matdes.2013.11.084 ↗
37. Encapsulating tantalum oxide into polypyrrole nanoparticles for X-ray CT/photoacoustic bimodal imaging-guided photothermal ablation of cancer10.1016/j.biomaterials.2014.03.086 ↗
38. Effect of Ta addition on shape memory behavior of Ti–22Nb alloy10.1016/j.msea.2005.10.065 ↗
39. Shape memory behavior in Ti–Zr alloys10.1016/j.scriptamat.2010.11.048 ↗
40. Severe plastic deformation of Ti74Nb26 shape memory alloys10.1016/j.msea.2011.06.051 ↗
41. Change in the deformation mode resulting from beta-omega compositional partitioning in a TiMo alloy: room versus elevated temperature10.1016/j.scriptamat.2016.11.013 ↗
42. Effect of Cu addition on phase transformation of Ti–Ni–Hf high-temperature shape memory alloys10.1016/S0167-577X(02)00810-8 ↗
43. Medical shape memory alloy applications—the market and its products10.1016/j.msea.2003.10.326 ↗
44. The Au–Ti (Gold–Titanium) system10.1007/BF02868667 ↗
45. Phase stability and mechanical properties of Ti-Cr based alloys with low Young's Modulus
46. Improvement of damping properties in laser processed superelastic Cu-Al-Mn shape memory alloys10.1016/j.matdes.2016.03.032 ↗
47. Oliveira · Laser welded superelastic Cu–Al–Mn shape memory alloy wires · 2016 · 90 · 122
48. Microstructure and mechanical properties of gas tungsten arc welded Cu-Al-Mn shape memory alloy rods10.1016/j.jmatprotec.2019.03.020 ↗
49. On the existence of the β → αm transformation in the alloy systems Ti–Ag, Ti–Au, and Ti–Si10.1007/BF02646561 ↗
50. Part I Nucleation kinetics of the β → αm transformation in Ti–Ag and Ti–Au alloys10.1016/0001-6160(80)90087-5 ↗
51. Manufacturing, structure control, and functional testing of Ti–Nb-based SMA for medical application10.1007/s40830-016-0059-y ↗
52. Nickel hypersensitivity: a clinical review and call to action10.1111/j.1365-4632.2009.04307.x ↗
53. The safety of nickel containing dental alloys10.1016/j.dental.2005.11.033 ↗
54. The role of stress induced martensite in ductile metastable beta Ti-alloys showing combined TRIP/TWIP effects10.1016/j.matpr.2015.07.336 ↗
55. Dietary reference intakes: vitamin A, vitamin K, arsenic, boron, chromium, copper, iodine, iron, manganese, molybdenum, nickel, silicon, vanadium, and zinc
56. Strengthening of β Ti–6Cr–3Sn alloy through β grain refinement, α phase precipitation and resulting effects on shape memory properties10.1016/j.msea.2012.09.030 ↗
57. In vitro cytotoxicity and hemocompatibility studies of Ti-Nb, Ti-Nb-Zr and Ti-Nb-Hf biomedical shape memory alloys10.1088/1748-6041/5/4/044102 ↗
58. The effects of α″ and ω phases on the superelasticity and shape memory effect of binary Ti–Mo alloys10.1016/j.jallcom.2017.05.299 ↗
59. Ductile Ti-rich high-entropy alloy controlled by stress induced martensitic transformation and mechanical twinning10.1016/j.msea.2019.138147 ↗
60. Biocompatibility of dental casting alloys: a review10.1016/S0022-3913(00)80016-5 ↗
61. Martensitic transformations and the shape memory effect in Ti50Ni10Au40 and Ti50Au50 alloys10.1016/0026-0800(87)90045-0 ↗
62. Cryogenic tensile properties and deformation behavior of a superhigh strength metastable beta titanium alloy Ti–15Mo–2Al10.1016/j.msea.2021.141344 ↗
63. Effect of Sn addition on the microstructure and superelasticity in Ti–Nb–Mo–Sn Alloys10.1016/j.jmbbm.2012.04.017 ↗