Multi-length scale strengthening and cytocompatibility of ultra high molecular weight polyethylene bio-composites by functionalized carbon nanotube and hydroxyapatite reinforcement
Source abstract
Abstract
The mechanical properties, such as hardness and elastic modulus, of ultra-high molecular weight polyethylene (UHMWPE) composites for acetabular cup liner are improved by adding hydroxyapatite (HAp) and carbon nanotubes (CNT). However, the weak adhesion of HAp (H) and CNT (C) with UHMWPE (U) limits the enhancement of mechanical properties. Thus, the surface of these reinforcements is silane-treated to improve the adhesion with polymer via Si-O and C=O bonds, as evidenced from spectroscopy techniques. An increased dispersion and interfacial adhesion of functionalized HAp (fH) and CNT (fC) with the polymer matrix is confirmed by nearly two-fold increased reinforcement fraction (Rf: 0.55) of U-10 wt% fHAp-2 wt.% fCNT (U10fH2fC) in comparison to U-10 wt% HAp-2 wt.% CNT (U10H2C). Additionally, Voronoi Tessellation (VT) on SEM micrographs of U10H2C and U10fH2fC revealed the dispersion of functionalized CNTs in U10fH2fC with a center-to-center distance of 0.076 μm, which is 74% higher for unfunctionalized CNT in U10H2C. The multilength scale strengthening of the UHMWPE matrix is confirmed from atomic level modification via functionalization of fillers which effectively adhered to the polymer chain on a micro-scale level. A uniform distribution of CNTs rendered increased crystallinity (+28%) of U10fH2fC, which in turn resulted in significant improvement in bulk mechanical properties (18%, 49%, and 12% increased hardness (148.1 MPa), elastic modulus (3.51 GPa) and tensile elastic modulus (219.8 MPa), respectively) in comparison to that of U10H2C. Functionalized-HAp/CNT reinforced UHMWPE composites maintained its cytocompatibility in the MTT test and fluorescence microscopy, affirming their potential employment as acetabular cup liners for hip joint arthroplasty.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Orthopaedic implants and arthroplasty · Tribology and Wear Analysis · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. Sustained loading increases the compressive strength of articular cartilage10.3109/03008209809021500 ↗
2. Effect of incorporating multi-walled carbon nanotube and graphene in UHMWPE matrix on the enhancement of thermal and mechanical properties10.1007/s10853-022-07959-2 ↗
3. Synergistic effect of MWCNTs functionalization on interfacial and mechanical properties of multi-scale UHMWPE fibre reinforced epoxy composites10.1016/j.compscitech.2016.07.026 ↗
4. Multi-length scale wear damage mechanisms of ultra-high molecular weight polyethylene nanocomposites10.1016/j.polymertesting.2019.106210 ↗
5. UHMWPE hybrid nanocomposites for improved tribological performance under dry and water-lubricated sliding conditions10.1007/s11249-017-0884-y ↗
6. Overview of hydroxyapatite–graphene nanoplatelets composite as bone graft substitute: mechanical behavior and in-vitro biofunctionality
7. Current state-of-the-art in membrane formation from ultra-high molecular weight polyethylene10.3390/membranes12111137 ↗
8. Biomaterials in total hip joint replacements: the evolution of basic concepts, trends, and current limitations—a review
9. Experimental study to evaluate the wear performance of UHMWPE and XLPE material for orthopedics application10.3390/bioengineering9110676 ↗
10. Impact of nanophase hydroxyapatite-based biomaterials on tissue engineering10.1166/jbns.2018.1566 ↗
11. Bischel · 2000 · 35 · 221
12. Hydroxyapatite reinforced polyethylene - a mechanically compatible implant material for bone replacement10.1016/0142-9612(81)90050-8 ↗
13. Wear of polymers
14. The effect of pre-irradiation vacuum storage on the oxidation and wear of radiation sterilized UHMWPE10.1016/j.wear.2006.03.011 ↗
15. Cao · 2022
16. Comparative study of micro- and nano-ZnO reinforced UHMWPE composites under dry sliding wear10.1016/j.wear.2012.11.083 ↗
17. Functional polymer surfaces for controlling cell behaviors10.1016/j.mattod.2017.07.002 ↗
18. Towards optimization of the silanization process of hydroxyapatite for its use in bone cement formulations10.1016/j.msec.2014.03.064 ↗
19. Mechanical characterization of ultra-high molecular weight polyethylene-hydroxyapatite nanocomposites
20. Spectroscopic and band-gap characteristics of gamma irradiated ultra-high molecular weight polyethylene/gamma aminobutyric acid (UHMWPE/GABA) composites
21. Anomalous wear behavior of UHMWPE during sliding against CoCrMo under varying cross-shear and contact pressure10.1007/s11249-022-01660-w ↗
22. Highly crosslinked and annealed UHMWPE
23. Edidin · 2000 · 2 · 1451
24. Hip simulator wear comparison of metal-on-metal, ceramic-on-ceramic and crosslinked UHMWPE bearings10.1016/j.wear.2005.02.104 ↗
25. Processing and mechanical properties of HA/UHMWPE nanocomposites10.1016/j.biomaterials.2006.02.023 ↗
26. Ultra high molecular weight polyethylene and its reinforcement with carbon nanotubes in medical devices
27. Compression molded ultra high molecular weight polyethylene-hydroxyapatite-aluminum oxide-carbon nanotube hybrid composites forHard tissue replacement10.1016/j.jmst.2013.03.010 ↗
28. Stiffness and expansion estimates for oriented short fiber composites10.1177/002199836900300419 ↗
29. Mechanical properties study of micro- and nano-hydroxyapatite reinforced ultrahigh molecular weight polyethylene composites10.1002/app.42869 ↗
30. Influence of crosslinked polyethylene structure on wear of joint replacements10.1016/j.triboint.2008.11.011 ↗
31. Compendium of highly crosslinked UHMWPEs
32. A primer on UHMWPE
33. The origins of UHMWPE in total hip arthroplasty
34. Trace concentrations of vitamin E protect radiation crosslinked UHMWPE from oxidative degradation10.1002/jbm.a.32122 ↗
35. Comparison of the properties of annealed crosslinked (CrossfireTM) and conventional polyethylene as hip bearing materials
36. Biotribological behavior of ultra high molecular weight polyethylene composites containing bovine bone hydroxyapatite10.1016/S1006-1266(08)60303-X ↗
37. The effects of the variations of carbon nanotubes on the micro-tribological behavior of carbon nanotubes/bismaleimide nanocomposite10.1016/j.compositesa.2007.06.003 ↗
38. Effect of silanization of hydroxyapatite fillers on physical and mechanical properties of a bis-GMA based resin composite10.1016/j.jmbbm.2015.09.033 ↗
39. Failure analysis of ultra-high molecular weight polyethylene tibial insert in total knee arthroplasty
40. Development of an extremely wear-resistant ultra high molecular weight polyethylene for total hip replacements10.1002/jor.1100170203 ↗
41. Tensile and biocompatibility properties of synthesized nano-hydroxyapatite reinforced ultrahigh molecular weight polyethylene nanocomposite10.1177/0021998315595711 ↗
42. UHMWPE nanocomposite coatings reinforced with alumina (Al2O3) nanoparticles for tribological applications10.3390/coatings8080280 ↗
43. Optimizing tribological, tensile & in-vitro biofunctional properties of UHMWPE based nanocomposites with simultaneous incorporation of graphene nanoplatelets (GNP) & hydroxyapatite (HAp) via a facile approach for biomedical applications10.1016/j.compositesb.2019.107181 ↗
44. Highly crosslinked and melted UHMWPE
45. Fretting of aluminum oxide, hydroxyapatite and carbon nanotubes reinforced ultra high molecular weight polyethylene
46. Effects of reinforcements and gamma-irradiation on wear performance of ultra-high molecular weight polyethylene as acetabular cup liner in hip-joint arthroplasty: a review10.1002/app.51275 ↗
47. Contact stress and tribological damage tolerance of hydroxyapatite and carbon nanotube reinforced polyethylene cup liner against zirconia femoral head
48. Radiation-induced effects on micro-scratch of ultra high molecular weight polyethylene biocomposites10.1016/j.jmrt.2021.02.040 ↗
49. Nie · 2012 · 1613
50. Of · 1969
51. Tensile properties of UHMWPE nanocomposites reinforced by CNTs and nHA for acetabular cup in hip joint replacement
52. Oliver · 1991 · 7 · 6
53. Owens · 1969 · 13 · 1741
54. Carbon nanotube functionalization decreases osteogenic differentiation in aluminum oxide reinforced ultrahigh molecular weight polyethylene10.1021/acsbiomaterials.6b00154 ↗
55. Neurotoxic effects of aluminium among foundry workers and Alzheimer's disease10.1016/S0161-813X(02)00097-9 ↗
56. Functionalization of carbon nanomaterials for advanced polymer nanocomposites: a comparison study between CNT and graphene10.1016/j.progpolymsci.2016.12.010 ↗
57. Effect of angled indentation on mechanical properties10.1016/j.jeurceramsoc.2009.03.010 ↗
58. Microstructural properties of novel nanocomposite material based on hydroxyapatite and carbon nanotubes: fabrication and nonlinear instability simulation10.1007/s40097-021-00395-9 ↗
59. Investigation of mechanical properties of UHMWPE composites reinforced with HAP+TiO2 fabricated by solvent dispersing technique10.1016/j.jmrt.2022.11.038 ↗
60. Improved wear, mechanical, and biological behavior of UHMWPE-HAp-zirconia hybrid nanocomposites with a prospective application in total hip joint replacement10.1007/s10853-018-3146-y ↗
61. Long-term wear failure analysis of uhmwpe acetabular cup in total hip replacement10.1016/j.jmbbm.2018.07.017 ↗
62. Mechanics of ZnO micro-rod and ZnO nanoparticle reinforcement in ultra-high molecular weight polyethylene biocomposite10.1088/0022-3727/47/34/345301 ↗
63. Aluminum in the central nervous system (CNS): toxicity in humans and animals, vaccine adjuvants, and autoimmunity10.1007/s12026-013-8403-1 ↗
64. Micro-milling operation of UHMWPE composites with PTFE and aramid reinforcements
65. High thermal conductivity of chain-aligned bulk linear ultra-high molecular weight polyethylene10.1063/1.5108520 ↗
66. Comparison of macro-, micro- and nanomechanical properties of clinically-relevant UHMWPE formulations10.1016/j.jmbbm.2020.104205 ↗
67. Study of ultra high molecular weight polyethylene/HDPE/alumina nanocomposites and their characterization
68. Sidewall amino-functionalization of single-walled carbon nanotubes through fluorination and subsequent reactions with terminal diamines10.1021/nl025944w ↗
69. Highly crosslinked polyethylene in posterior-stabilized total knee arthroplasty. In vitro performance evaluation of wear, delamination, and tibial post durability10.1016/j.arth.2010.02.010 ↗
70. Effects of hybrid fillers on the wear, Tensile and morphology properties of UHMWPE/Chitosan-ZnO composites
71. Quantification of the effect of cross-path motion on the wear rate of ultra-high molecular weight polyethylene10.1016/S0043-1648(03)00357-0 ↗
72. Tribological behaviour of carbon filled hybrid UHMWPE composites in water10.1016/j.triboint.2018.04.001 ↗
73. Effects of surface modification by argon plasma on peel strength of woven-type ultrahigh-molecular-weight polyethylene
74. Zhang · 2023 · 304
75. Penetration of lubricating water molecules at the frictional interface of UHMWPE: insights from molecular dynamics simulations10.1016/j.molliq.2022.120760 ↗
76. Improving the dispersion and integration of single-walled carbon nanotubes in epoxy composites through functionalization10.1021/nl0342489 ↗
77. Effect of carbon nanotube addition on tribological behavior of UHMWPE10.1023/B:TRIL.0000015206.21688.87 ↗