Stress Concentration on PDMS: An evaluation of three numerical constitutive models using digital image correlation
Source abstract
Abstract
The examination of hyperelastic materials' behavior, such as polydimethylsiloxane (PDMS), is crucial for applications in areas as biomedicine and electronics. However, the limitations of hyperelastic models for specific stress scenarios, with stress concentration, are not well explored on the literature. To address this, firstly, three constitutive models were evaluated (Neo-Hookean, Mooney-Rivlin, and Ogden) using numerical simulations and Digital Image Correlation (DIC) analysis during a uniaxial tensile test. The samples were made of PDMS with stress concentration geometries (center holes, shoulder fillets, and edge notches). Results of ANOVA analysis showed that any of the three models can be chosen for numerical analysis of PDMS since no significant differences in suitability were found. Finally, the Ogen model was chosen to obtain the stress concentration factors for these geometries, a property which characterize how discontinuities change the maximum stress supported by an element. Our study provides new values for variables needed to analyze and design hyperelastic elements and produce a foundation for understanding PDMS stress-strain behavior.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Elasticity and Material Modeling · Mechanical Engineering and Vibrations Research · Optical measurement and interference techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. PDMS/PVDF hybrid electrospun membrane with superhydrophobic property and drop impact dynamics for dyeing wastewater treatment using membrane distillation10.1016/j.memsci.2016.10.028 ↗
2. Polydimethylsiloxane composites characterization and its applications: a review10.3390/polym13234258 ↗
3. 1996
4. Evaluation of the energy change due to presence of multiple irregularly shaped inclusions in hyperelastic solids10.1016/j.finel.2009.11.006 ↗
5. Poisson's ratio measurement through engraving the grid pattern inside poly(dimethylsiloxane) by ultrafast laser10.35848/1347-4065/ac2424 ↗
6. A hyperelastic model to capture the mechanical behaviour and histological aspects of the soft tissues10.1016/j.jmbbm.2021.105013 ↗
7. Stress analysis of elastomeric materials at large extensions using the finite element method10.1007/BF00351245 ↗
8. Use of rigid-body motion for the investigation and estimation of the measurement errors related to digital image correlation technique10.1016/j.optlaseng.2007.05.008 ↗
9. Biodegradable elastomer from 2,5-Furandicarboxylic acid and ε-caprolactone: effect of crystallization on elasticity10.1021/acssuschemeng.9b04210 ↗
10. Analysis of stress and strain concentration around a centralized elliptical hole in a monodomain liquid crystal elastomer sheet10.1016/j.ijsolstr.2022.112079 ↗
11. Strain and stress concentrations in elastomers at finite deformations: effects of strain-induced crystallization, filler reinforcement, and deformation rate10.1007/s00707-016-1615-4 ↗
12. Hyperelastic structures: a review on the mechanics and biomechanics10.1016/j.ijnonlinmec.2022.104275 ↗
13. A comparison among Neo-Hookean model, Mooney-Rivlin model, and Ogden model for chloroprene rubber10.1007/s12541-012-0099-y ↗
14. Comparison of hyperelastic models for rubber-like materials10.5254/1.3547969 ↗
15. Properties and applications of PDMS for biomedical engineering: a review10.3390/jfb13010002 ↗
16. Permeability and mechanical properties of gradient porous PDMS scaffolds fabricated by 3D-printed sacrificial templates designed with minimal surfaces10.1016/j.actbio.2019.06.040 ↗
17. Stress concentration factors around a circular hole in two fiber reinforced materials under large deformations10.1016/j.mechmat.2021.104089 ↗
18. Mechanical characterization of polytetrafluoroethylene polymer using full-field displacement method10.1016/j.optlaseng.2011.01.011 ↗
19. Mechanical characterization of hyperelastic polydimethylsiloxane by simple shear test10.1016/j.msea.2010.11.025 ↗
20. Large deformation isotropic elasticity – on the correlation of theory and experiment for incompressible rubberlike solids
21. Large deformation isotropic elasticity – on the correlation of theory and experiment for incompressible rubberlike solids
22. Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review10.1088/0957-0233/20/6/062001 ↗
23. Mechanical and thermal characterization of natural intralaminar hybrid composites based on sisal10.3390/polym12040866 ↗
24. Pilkey · 2020
25. Mechanical analysis of PDMS material using biaxial test10.3934/matersci.2019.1.97 ↗
26. Large elastic deformations of isotropic materials IV. further developments of the general theory
27. Wall expansion assessment of an intracranial aneurysm model by a 3D Digital Image Correlation System10.1016/j.measurement.2016.03.045 ↗
28. Rupture of 3D-printed hyperelastic composites: experiments and phase field fracture modeling10.1016/j.jmps.2020.103941 ↗
29. Generalised Mooney–Rivlin models for brain tissue: a theoretical perspective10.1016/j.ijnonlinmec.2018.09.008 ↗
30. Composite material of PDMS with interchangeable transmittance: study of optical, mechanical properties and wettability10.3390/jcs5040110 ↗
31. PU tensile tests: conventional and digital image correlation analysis10.1016/j.prostr.2022.01.100 ↗
32. Characterization of hyperelastic rubber-like materials by biaxial and uniaxial stretching tests based on optical methods10.1016/j.polymertesting.2008.09.001 ↗
33. Temperature-dependent thermal and mechanical properties of flexible functional PDMS/paraffin composites10.1016/j.matdes.2019.108219 ↗
34. Investigating mechanical behaviours of PDMS films under cyclic loading10.3390/polym14122373 ↗
35. Characterization of shear strain on PDMS: numerical and experimental approaches10.3390/app10093322 ↗
36. Effect of PDMS on the waterproofing performance and corrosion resistance of cement mortar
37. PDMS with designer functionalities—properties, modifications strategies, and applications10.1016/j.progpolymsci.2018.06.001 ↗
38. The concentration of stress and strain in finite thickness elastic plate containing a circular hole10.1016/j.ijsolstr.2007.08.030 ↗
39. Evaluation of large plastic deformation for metals by a non-contacting technique using digital image correlation with laser speckles10.1016/j.matdes.2020.108626 ↗
40. Modification of silicalite-1 by vinyltrimethoxysilane (VTMS) and preparation of silicalite-1 filled polydimethylsiloxane (PDMS) hybrid pervaporation membranes10.1016/j.seppur.2010.08.017 ↗