journal article·2024-03

Unidirectional titanium fiber-reinforced porous titanium with mechanical properties suitable for load-bearing biomaterials

Naoto Kobayashi, Tomoyuki Fujii, Yoshinobu Shimamura

Publisher page

Abstract

Biomaterials for load-bearing implants are expected to exhibit mechanical biocompatibility of low stiffness and high strength for avoiding stress shielding and failure of the implants in vivo, respectively. This study aimed to develop porous titanium (Ti) reinforced with long Ti fibers so that the porous Ti exhibited low Young's modulus and high tensile strength. The unidirectional Ti fiber-reinforced porous Ti with porosities (p) of 40%-58% and volume percentages of Ti fiber (Vf) of 3%-33% has been successfully fabricated via the space holder technique. Mechanical testing revealed that its strength was improved, compared with uniform porous Ti because Ti fibers prevent microscopic damage progress. The porous Ti with p = 40% and Vf = 33% exhibited the strength of 233 MPa and Young's modulus of 26 GPa, which were higher than and comparable to those of natural bones, respectively. Hence, the Ti fiber-reinforced porous Ti exhibited ideal mechanical properties for implant applications.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · Cellular and Composite Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Fiber waviness and its effect on the mechanical performance of fiber reinforced polymer composites: an enhanced review10.1016/j.compositesa.2021.106526 ↗
2. Development and mechanical characterization of porous titanium bone substitutes10.1016/j.jmbbm.2012.01.008 ↗
3. Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing10.1016/j.matdes.2013.01.071 ↗
4. Physical and mechanical characterisation of 3D-printed porous titanium for biomedical applications10.1007/s10856-014-5277-2 ↗
5. Uniform porous and functionally graded porous titanium fabricated via space holder technique with spark plasma sintering for biomedical applications10.1016/j.apt.2022.103598 ↗
6. Characterization of a new beta titanium alloy, Ti-12Mo-3Nb, for biomedical applications10.1016/j.jallcom.2011.11.035 ↗
7. Outcomes of mandibular reconstruction using three-dimensional custom-made porous titanium prostheses10.1016/j.jormas.2022.09.002 ↗
8. Harris · 1999
9. Porous titanium materials with entangled wire structure for load-bearing biomedical applications10.1016/j.jmbbm.2011.09.016 ↗
10. Hertzberg · 2020
11. Characterization of interfacial properties between fibre and polymer matrix in composite materials - a critical review10.1016/j.jmrt.2021.05.076 ↗
12. The relationship between stress shielding and bone resorption around total hip stems and the effects of flexible materials
13. Mechanical properties of open-pore titanium foam10.1002/jbm.a.31118 ↗
14. Development of open cell porous metals and alloys with base and half metal elements10.2320/materia.52.395 ↗
15. Cell Structure control of porous titanium composite synthesized by combustion reaction10.1002/adem.200600089 ↗
16. Effect of microstructure on the tensile property of porous Ti produced by powder metallurgy technique10.1016/j.msea.2011.11.028 ↗
17. Fabrication and characterization of porous Ti-10Cu alloy for biomedical application10.1016/j.jallcom.2017.06.321 ↗
18. Development of a new ?-Ti alloy with low modulus and favorable plasticity for implant material10.1016/j.msec.2015.12.076 ↗
19. Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting10.1016/j.actamat.2016.04.029 ↗
20. Review on titanium and titanium based alloys as biomaterials for orthopedic applications10.1016/j.msec.2019.04.064 ↗
21. Bone formation in titanium porous scaffold with immobilization of BMP-2
22. Dental implant materials, Commercially pure titanium and titanium alloys10.1111/j.1532-849X.1999.tb00006.x ↗
23. On the influence of space holder in the development of porous titanium implants: mechanical, computational and biological evaluation10.1016/j.matchar.2015.08.019 ↗
24. Murphy · 2016
25. Stress shielding and bone resorption in shoulder arthroplasty10.1067/mse.2003.22 ↗
26. Densification process in fabrication of PSZ-Ti composites by spark plasma sintering technique10.1016/j.matchar.2017.08.016 ↗
27. Synthesis of BaCe0.9-xZrxY0.1O3-δ nanopowders and the study of proton conductors fabricated on their basis by low-temperature spark plasma sintering10.1016/j.ijhydene.2019.05.231 ↗
28. Low Young's modulus in Ti-Nb-Ta-Zr-O alloys: cold working and oxygen effects10.1016/j.actamat.2011.07.050 ↗
29. Processing and characterization of porous titanium for implants by using NaCl as space holder10.1016/j.jmatprotec.2011.12.015 ↗
30. Development of porous titanium for biomedical applications: a comparison between loose sintering and space-holder techniques10.1016/j.msec.2013.11.036 ↗
31. The effect of pore size and porosity on mechanical properties and biological response of porous titanium scaffolds10.1016/j.msec.2017.03.249 ↗
32. Ueber die Beziehung zwischen den beiden Elasticitatsconstanten isotroper Korper10.1002/andp.18892741206 ↗
33. Mechanical properties of porous titanium with different distributions of pore size10.1016/S1003-6326(13)62735-1 ↗
34. A novel approach to fabrication of three-dimensional porous titanium with controllable structure10.1016/j.msec.2016.11.119 ↗
35. Evaluation of channel-like porous-structured titanium in mechanical properties and osseointegration10.1016/j.jmst.2019.10.026 ↗
36. Nanocrystalline β-Ti alloy with high hardness, low Young's modulus and excellent in vitro biocompatibility for biomedical applications10.1016/j.msec.2013.04.044 ↗
37. Review of effect of oxygen on room temperature ductility of titanium and titanium alloys10.1179/1743290114Y.0000000108 ↗
38. Mechanical properties and electrochemical behavior of porous Ti-Nb biomaterials10.1016/j.jmbbm.2018.07.018 ↗
39. The select of internal architecture for porous Ti alloy scaffold: a compromise between mechanical properties and permeability10.1016/j.matdes.2020.108754 ↗
40. A review on biomedical titanium alloys: recent progress and prospect10.1002/adem.201801215 ↗
41. Mechanical behaviors of porous Ti with high porosity and large pore size prepared by one-step spark plasma sintering technique10.1016/j.vacuum.2015.09.024 ↗
42. Development of high Zr-containing Ti-based alloys with low Young's modulus for use in removable implants10.1016/j.msec.2011.05.013 ↗
43. Beta type Ti-Mo alloys with changeable Young's modulus for spinal fixation applications10.1016/j.actbio.2012.02.004 ↗