Calcium silicate/gelatin composite scaffolds with controllable degradation behavior: Fabrication and evaluation
Source abstract
Abstract
Calcium silicate can be used as an excellent material for biodegradable bone scaffolds because it can provide bioactive ions to promote bone regeneration. However, the brittleness and rapid degradation of calcium silicate scaffolds have significantly limited their clinical application. In this work, the calcium silicate scaffolds printed by DLP technology were immersed in a gelatin solution under high vacuum condition to obtain calcium silicate/gelatin composite scaffolds with good mechanical and biological properties. Then, genipin was used as a cross-linker for gelatin to control the degradation properties of the composite scaffolds. The initial compressive strength and toughness of the composite scaffolds were 5.0 times and one order of magnitude higher than those of the pure calcium silicate scaffolds, respectively. The gelatin on the surface of the scaffolds could effectively act as a protective layer to regulate the degradation behaviors of the calcium silicate substrate through controlling the crosslinking degree of the gelatin. After degrading for 14 days, the composite scaffolds at 1.0 % genipin concentration exhibited the highest compressive strength of 8.6 ± 0.8 MPa, much higher than that of the pure ceramic scaffold (1.5 ± 0.3 MPa). It can be found that the toughness of the composite scaffolds were almost over 13.2 times higher than that of the pure ceramic scaffold during degradation, despite the higher toughness loss for the former. Furthermore, the composite scaffolds showed enhanced cell biocompatibility and viability. These results demonstrate that the calcium silicate/gelatin composite scaffolds can be a promising candidate in bone tissue regeneration.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. A review: silicate ceramic-polymer composite scaffold for bone tissue engineering10.1080/00914037.2020.1817018 ↗
2. Effect of calcium silicate nanoparticle on surface feature of calcium phosphates hybrid bio-nanocomposite using for bone substitute application10.1016/j.powtec.2019.10.111 ↗
3. 3D printing of complicated GelMA-coated Alginate/Tri-calcium silicate scaffold for accelerated bone regeneration10.1016/j.ijbiomac.2022.12.267 ↗
4. In vitro characterization of porous calcium phosphate scaffolds capped with crosslinked hydrogels to avoid inherent brittleness10.1016/j.ceramint.2017.10.077 ↗
5. Mechanical performance of PEEK-Ti6Al4V interpenetrating phase composites fabricated by powder bed fusion and vacuum infiltration targeting large and load-bearing implants10.1016/j.matdes.2022.110531 ↗
6. Silicate-doped nano-hydroxyapatite/graphene oxide composite reinforced fibrous scaffolds for bone tissue engineering10.1177/0885328218763665 ↗
7. Porous bioceramic scaffolds based on akermanite obtained by 3D printing for bone tissue engineering10.1016/j.ceramint.2023.08.270 ↗
8. Fabrication and characterization of highly porous barium titanate based scaffold coated by Gel/HA nanocomposite with high piezoelectric coefficient for bone tissue engineering applications10.1016/j.jmbbm.2017.12.034 ↗
9. Mechanical performance of three-dimensional bio- nanocomposite scaffolds designed with digital light processing for biomedical applications
10. Hierarchically porous structure, mechanical strength and cell biological behaviors of calcium phosphate composite scaffolds prepared by combination of extrusion and porogen burnout technique and enhanced by gelatin10.1016/j.msec.2017.08.039 ↗
11. The in vitro evolution of resorbable brushite cements: a physico-chemical, micro-structural and mechanical study10.1016/j.actbio.2017.02.023 ↗
12. Effect of zirconium oxide and zinc oxide nanoparticles on physicochemical properties and antibiofilm activity of a calcium silicate-based material10.1155/2014/975213 ↗
13. Degradation behaviors of three-dimensional hydroxyapatite fibrous scaffolds stabilized by different biodegradable polymers10.1016/j.ceramint.2020.02.217 ↗
14. Development of porous scaffolds based on the in situ synthesis of biphasic calcium phosphate in a gelatin-polyvinyl alcohol matrix for bone tissue engineering10.1016/j.molstruc.2023.134951 ↗
15. In vitro degradation and angiogenesis of the porous calcium silicate-gelatin composite scaffold10.1039/C5TB02401C ↗
16. Calcium zirconium silicate (baghdadite) ceramic as a biomaterial10.1016/j.ceramint.2020.06.105 ↗
17. Enhanced mechanical performance and biological evaluation of a PLGA coated beta-TCP composite scaffold for load-bearing applications10.1016/j.eurpolymj.2011.05.004 ↗
18. Khandan · 2018
19. Clinical applications of calcium silicate-based materials: a narrative review
20. Therapeutic effects of the addition of fibroblast growth factor-2 to biodegradable gelatin/magnesium-doped calcium silicate hybrid 3D-printed scaffold with enhanced osteogenic capabilities for critical bone defect restoration10.3390/biomedicines9070712 ↗
21. Antibacterial 45S5 Bioglass(R)-based scaffolds reinforced with genipin cross-linked gelatin for bone tissue engineering10.1039/C5TB00044K ↗
22. Gelatin modified porous CaP ceramics for bone tissue regeneration
23. Effect of polycaprolactone impregnation on the properties of calcium silicate scaffolds fabricated by 3D printing10.1016/j.matdes.2022.110856 ↗
24. Advances in the use of calcium silicate-based materials in bone tissue engineering10.1016/j.ceramint.2023.03.063 ↗
25. Effects of PLGA coating on biological and mechanical behaviors of tissue engineering scaffolds10.1016/j.porgcoat.2023.107406 ↗
26. Performance comparison of PLA- and PLGA-coated porous bioceramic scaffolds: mechanical, biodegradability, bioactivity, delivery and biocompatibility assessments10.1016/j.jconrel.2022.09.022 ↗
27. Improving the compressive strength of bioceramic robocast scaffolds by polymer infiltration10.1016/j.actbio.2010.05.024 ↗
28. Enhancing the mechanical and in vitro performance of robocast bioglass scaffolds by polymeric coatings: effect of polymer composition10.1016/j.jmbbm.2018.04.022 ↗
29. Effect of porosity and phase composition in 3D printed calcium phosphate scaffolds on bone tissue regeneration in vivo10.1016/j.matdes.2022.110819 ↗
30. Current advances in bone tissue engineering concerning ceramic and bioglass scaffolds: a review10.1016/j.ceramint.2019.07.096 ↗
31. Repairing a critical-sized bone defect with highly porous modified and unmodified baghdadite scaffolds10.1016/j.actbio.2012.07.036 ↗
32. 3D calcium silicophosphate porous scaffold: in vitro and in vivo response10.1016/j.ceramint.2022.08.287 ↗
33. Fabrication of a novel nanostructured calcium zirconium silicate scaffolds prepared by a freeze-casting method for bone tissue engineering10.1016/j.ceramint.2014.07.039 ↗
34. In vitro evaluation of diopside/baghdadite bioceramic scaffolds modified by polycaprolactone fumarate polymer coating10.1016/j.msec.2019.110176 ↗
35. Review on calcium silicate‐based bioceramics in bone tissue engineering10.1111/ijac.13577 ↗
36. The effect of Zn contents on phase composition, chemical stability and cellular bioactivity in Zn-Ca-Si system ceramics10.1002/jbm.b.31109 ↗
37. Development of strong and tough beta-TCP/PCL composite scaffolds with interconnected porosity by digital light processing and partial infiltration
38. Effect of graphite particles as additive on the curing behaviour of β-tricalcium phosphate suspensions and scaffold fabrication by digital light processing10.1016/j.jeurceramsoc.2020.05.013 ↗
39. β-Tricalcium phosphate/ԑ-polycaprolactone composite scaffolds with a controllable gradient: fabrication and characterization10.1016/j.ceramint.2019.05.140 ↗
40. Mesoporous calcium silicate and titanium composite scaffolds via 3D-printing for improved properties in bone repair
41. Zadehnajar · 2021
42. Bi-material microstructural design of biodegradable composites using topology optimization10.1016/j.matdes.2021.109973 ↗
43. Bioceramic fibrous scaffolds built with calcium silicate/hydroxyapatite nanofibers showing advantages for bone regeneration10.1016/j.ceramint.2021.03.234 ↗
44. Effects of poly (epsilon-caprolactone) coating on the properties of three-dimensional printed porous structures10.1016/j.jmbbm.2016.04.035 ↗
45. Novel microsphere-packing synthesis, microstructure, formation mechanism and in vitro biocompatibility of porous gelatin/hydroxyapatite microsphere scaffolds10.1016/j.ceramint.2021.08.111 ↗