Effects of sintering additives and sintering methods on the mechanical, antimicrobial and optical properties of Si3N4 bioceramics
Source abstract
Abstract
Si3N4 bioceramics were fabricated using GPS and SPS method with MgO-RE2O3 (RE = La, Nd, Gd, Ho and Lu) sintering additives. The effect of sintering methods and sintering additives on the grain growth, mechanical, antimicrobial properties and color of Si3N4 bioceramics were studied. Samples sintered with GPS are composed of β-Si3N4 and samples sintered with SPS are composed of α-Si3N4 and β-Si3N4. The growth of β-Si3N4 grains in samples sintered with GPS are more adequate. Samples sintered with GPS exhibit a S. aureus inactivation rate up to 98% and a bright color appearance with a hardness of about 13 GPa and a fracture toughness up to 7.5 MPa m1/2, suitable for dental implants. And samples sintered with SPS exhibit a hardness of about 17 GPa and a fracture toughness about 6 MPa m1/2.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Advanced ceramic materials synthesis · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Effects of rare-earth (re) intergranular adsorption on the phase transformation, microstructure evolution, and mechanical properties in silicon nitride with RE2O3+MgO additives: RE=La, Gd, and Lu10.1111/j.1551-2916.2008.02448.x ↗
2. Observations on the influence of secondary me oxide additives (me=Si, Al, Mg) on the microstructural evolution and mechanical behavior of silicon nitride ceramics containing RE2O3(re=La, Gd, lu)10.1111/j.1551-2916.2009.03435.x ↗
3. Mn4+-activated double-perovskite-type Sr2LuNbO6 multifunctional phosphor for optical probing and lighting10.1021/acsami.3c03897 ↗
4. Amorphous intergranular films in silicon nitride ceramics quenched from high temperatures10.1111/j.1151-2916.1993.tb04019.x ↗
5. Effects of MgO-RE2O3 and SiO2-RE2O3 (re = La, nd, Gd, ho and lu) complex sintering additives on the phase composition, microstructure and mechanical properties of dual-phase Si3N4 ceramics10.1016/j.ceramint.2023.09.121 ↗
6. Rapid fabrication of Si3N4 ceramics with gradient appearance and microstructure10.1111/jace.19352 ↗
7. Fracture toughness determinations by indentation10.1111/j.1151-2916.1976.tb10991.x ↗
8. Colour change of co-doped yttrium aluminium borate crystals under illumination with different white light sources10.2478/s11532-008-0052-1 ↗
9. Determination of phase content of Si3N4 by x-ray diffraction analysis
10. Decreased bacteria activity on Si3N4 surfaces compared with peek or titanium
11. Colour of gas-pressure-sintered silicon nitride ceramicspart II. Thermodynamic considerations10.1016/S0955-2219(00)00235-1 ↗
12. Colour of gas-pressure-sintered silicon nitride ceramics part I. Experimental data10.1016/S0955-2219(00)00205-3 ↗
13. Ordered coalescence of nanocrystallites contributing to the rapid anisotropic grain growth in silicon nitride ceramics10.1016/j.scriptamat.2013.04.017 ↗
14. A facile method to produce rodlike β-Si3N4 seed crystallites for bimodal structure controlling10.1111/jace.18893 ↗
15. Thermal conductivity improvement in silicon nitride ceramics via grain purification10.1111/jace.19478 ↗
16. Hemocompatibility and antibacterial properties of lanthanum oxide films synthesized by dual plasma deposition10.1002/jbm.a.31838 ↗
17. Kang · 2005
18. Sintering kinetics at final stage sintering: model calculation and map construction10.1016/j.actamat.2004.06.015 ↗
19. Oxygen content in β-Si3N4 crystal lattice10.1111/j.1151-2916.1999.tb02238.x ↗
20. Thermal conductivity of β-Si3N4: II, effect of lattice oxygen10.1111/j.1151-2916.2000.tb01501.x ↗
21. Improvement of the high temperature properties of the LiYO2–Si3N4 system by removing residual Li10.1016/j.jeurceramsoc.2009.06.021 ↗
22. Enhanced thermal conductivity in Si3N4 ceramic by addition of a small amount of carbon10.1016/j.jeurceramsoc.2018.10.006 ↗
23. Microstructure and thermal conductivity of gas-pressure-sintered Si3N4 ceramic: the effects of Y2O3 additive content10.1016/j.jeurceramsoc.2020.08.035 ↗
24. Recent advances in the application and biological mechanism of silicon nitride osteogenic properties: a review10.1039/D3BM00877K ↗
25. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
26. Spark plasma sintered silicon nitride ceramics with high thermal conductivity using MgSiN2 as additives10.1111/j.1551-2916.2009.03139.x ↗
27. Silicon nitride ceramics10.1007/3-540-45623-6_2 ↗
28. Silicon nitride: a bioceramic with a gift10.1021/acsami.9b07997 ↗
29. Silicon nitride bioceramics induce chemically driven lysis in porphyromonas gingivalis10.1021/acs.langmuir.6b00393 ↗
30. High-pressure spark plasma sintering of silicon nitride with LiF additive10.1016/j.jeurceramsoc.2017.10.034 ↗
31. Silicon nitride and related materials10.1111/j.1151-2916.2000.tb01182.x ↗
32. Influence of the rare-earth element on the mechanical properties of re–Mg-bearing silicon nitride10.1111/j.1551-2916.2005.00421.x ↗
33. Observation of rare-earth segregation in silicon nitride ceramics at subnanometre dimensions10.1038/nature02410 ↗
34. The α-β transformation in silicon nitride single crystals10.1111/j.1151-2916.1997.tb02876.x ↗
35. Influence of color centers on optical and lasing properties of the gadolinium gallium garnet single crystals doped with Nd3+ ions10.1016/S0022-2313(99)00030-7 ↗
36. Phase transformation and interface segregation behavior in Si3N4 ceramics sintered with La2O3-Lu2O3 mixed additive10.1111/jace.14663 ↗
37. Enhanced in-plane thermal conductivity and mechanical strength of flexible films by aligning and interconnecting Si3N4 nanowires10.1021/acsami.3c04473 ↗
38. Effect of lattice impurities on the thermal conductivity of β-Si3N410.1016/S0955-2219(02)00074-2 ↗
39. Fabrication and wear behaviors of graded Si3N4 ceramics by the combination of two-step sintering and β-Si3N4 seeds10.1016/j.jeurceramsoc.2018.03.045 ↗
40. Effects of MgSiN2 addition and post-annealing on mechanical and thermal properties of Si3N4 ceramics10.1016/j.ceramint.2020.03.097 ↗
41. Plastic deformation in silicon nitride ceramics via bond switching at coherent interfaces10.1126/science.abq7490 ↗
42. Porous Si3N4 ceramics with surface roughness for bone repair10.1016/j.ceramint.2023.12.067 ↗
43. Development of hydrofluoric acid-cleaned silicon nitride implants for periprosthetic infection eradication and bone regeneration enhancement10.1016/j.msec.2021.112241 ↗
44. The control of interfacial bonding state and optimization of mechanical properties of si3n4f/bn/Si3N4 composites via different synthesis technologies10.1016/j.jeurceramsoc.2020.09.041 ↗
45. Point-defect populations as induced by cation/anion substitution in β-Si3N4 lattice. A cathodoluminescence study10.1021/jp509995c ↗
46. Interface structure and atomic bonding characteristics in silicon nitride ceramics10.1126/science.1104173 ↗