Evaluation to the effect of B2O3–La2O3–SrO–Na2O–Al2O3 bonding agent on Ti6Al4V–porcelain bonding
Source abstract
Abstract
Low-fusing bonding agents have been widely applied in Ti-ceramics restorations. As an important category, borate bonding agents have great potentials in increasing Ti-porcelain bonding. The purpose of this study is to evaluate the effect of borate bonding agent with addition of Na2O and Al2O3 on Ti6Al4V-porcelain bonding. The thermal properties of borate bonding agent, such as glass transition temperature (Tg) and crystallization peak temperature (Tp), were investigated to establish the sintering process. And the coefficient of thermal expansion (CTE) was to evaluate the matching effect of porcelain to Ti6Al4V. The bond strength was analyzed by the three point bending test. The microscopic morphology of the borate bonding agent surface after sintering, the interface of Ti-borate bonding agent-porcelain, and the fracture mode after porcelains fracture, were studied to assess the influence of borate bonding agent on Ti6Al4V-ceramics. With the addition of Na2O and Al2O3, the porcelain residues were observed increased indication on the Ti6Al4V surface after porcelain fracture and the bond strength was acquired the maximum (49.45MPa) in the bonding agent composition of 75.70B2O3-5.92La2O3-11.84SrO-4.67Na2O-1.87Al2O3. Those results suggest that borate bonding agent is an effective way to improve the Ti6Al4V-ceramics bond strength. And the addition of Na2O and Al2O3 strengthen this effect.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. A study of the bond strength and color of ultralow-fusing porcelain
2. Effects of airborne-particle abrasion, sodium hydroxideanodization, and electrical discharge machiningon porcelain adherence to cast commercially pure Titanium10.1002/jbm.b.30730 ↗
3. Glass formation in the BaO–La2O3–B2O3 system10.1023/A:1025569524461 ↗
4. The influence of SiO2 and SiO2–TiO2 intermediate coatings on bond strength of titanium and Ti6Al4V alloy to dental porcelain10.1016/j.dental.2009.01.107 ↗
5. Interfacial reactions between titanium and borate glass. Joining and adhesion of advanced inorganic materials10.1557/PROC-314-77 ↗
6. Polydedral arrangements in Lanthanum Aluminoborate glasses10.1111/j.1151-2916.1997.tb02970.x ↗
7. Porcelain adherence to dental cast CP titanium: effects of surface modifications10.1016/S0142-9612(00)00263-5 ↗
8. Synthesis and characterization of anovel non-linear optical material La2SrB10O1910.1016/S0960-8974(00)00015-2 ↗
9. Bonding agents of low fusing cpTi porcelain: elemental and morphological characterization10.1016/j.jpor.2009.03.003 ↗
10. An analytical model to predict the effects of heating rate and applied load on glass transition temperatures of dental porcelain10.1177/00220345860650050201 ↗
11. Fabrication and characterization of B2O3–Al2O3–Na2O glass system for transparent dielectric layer10.1016/j.ceramint.2013.05.129 ↗
12. Characteristics of La2CaB10O19 crystallization from glass10.1016/j.jnoncrysol.2010.07.025 ↗
13. Non-isothermal crystallization kinetics of La2CaB10O19 from glass10.1016/j.jnoncrysol.2011.01.028 ↗
14. Additive fabrication technologies applied to medicine and health care: a review10.1007/s00170-007-1308-1 ↗
15. Preparation and characterization of a titanium bonding agent10.1016/j.msec.2012.04.038 ↗
16. Influence of water, loading rate and bonder on the adhesion of porcelain to titanium10.1016/j.jdent.2005.11.004 ↗
17. Effect of surface treatment on bond strength of low-fusing porcelain to commercially pure titanium10.1016/j.prosdent.2005.07.007 ↗
18. Effects of Al2O3 on (1−x)[SrO–SiO2–B2O3]–xAl2O3 glass sealant for intermediate temperature solid oxide fuel cell10.1016/j.ceramint.2015.07.182 ↗
19. The effect of borate and silicate structure on thermal conductivity in the molten Na2O–B2O3–SiO2 system10.1016/j.jnoncrysol.2015.02.008 ↗
20. Bonding of low-fusing dental porcelain to commercially pure titanium10.1002/jbm.820280907 ↗
21. Study of Al2O3 effect on structural change and phase separation in Na2O–B2O3–SiO2 glass by NMR10.1023/A:1004853603298 ↗
22. Bioactive borate glass coatings for titanium alloys10.1007/s10856-008-3419-0 ↗
23. Lütjering · 2007
24. Thermophysical properties and devitrification of SrO–La2O3–Al2O3–B2O3–SiO2-based glass sealant for solid oxide fuel/electrolyzer cells10.1016/j.jpowsour.2007.12.101 ↗
25. The effect of surface modifications on titanium to enable titanium-porcelain bonding10.1016/j.dental.2007.01.009 ↗
26. Effect of barium in porcelain on bonding of titanium-porcelain system
27. A modified method for kinetic analysis of thermoanalytical data10.1007/BF01909401 ↗
28. Effects of silicon coating on bond strength of two different titanium ceramic to titanium10.1016/j.dental.2005.01.014 ↗
29. Effects of oxide Layer on the bonding strength of Ni–Cr alloys with porcelain ceramics10.1166/jnn.2015.10459 ↗
30. 3D printing based on imaging data: review of medical applications10.1007/s11548-010-0476-x ↗
31. Crystallization and sinterability of glass-cramics in the system La2O3–SrO–B2O310.1016/j.ceramint.2013.06.002 ↗
32. Comparative evaluation of bond strength of various metal–ceramic restorations10.1016/j.matdes.2008.06.002 ↗
33. La2O3–Al2O3–B2O3–SiO2 glasses for solid oxide fuel cell applications10.1016/j.ijhydene.2010.12.105 ↗
34. Williams · 1982
35. A new lanthanum and calcium borate La2CaB10O1910.1021/cm0003119 ↗
36. Microstructural evolution and microhardness of a selective-laser-melted Ti6Al4V alloy after post heat treatments10.1016/j.jallcom.2016.02.183 ↗
37. Selective laser melting of Ti6Al4V alloy for biomedical applications: temperature monitoring and microstructural evolution10.1016/j.jallcom.2013.08.183 ↗
38. The effect of Goldbonder on the adhesion between porcelain and pure titanium10.1111/j.1365-2842.2004.01306.x ↗
39. Bond strength of binary titanium alloys to porcelain10.1016/S0142-9612(00)00329-X ↗
40. Phase relation in the system La2O3–CaO–B2O310.1016/S0925-8388(00)01276-7 ↗
41. Mechanism for converting Al2O3-containing borate glassto hydroxyapatite in aqueous phosphate solution10.1016/j.actbio.2008.11.021 ↗
42. Structure/property correlations in ion-conducting mixed-network former glasses: solid-state NMR studies of the system Na2O–B2O3–P2O510.1021/cm0628092 ↗
43. Bond strength and interfacial characterization of eight low fusing porcelains to cp Ti10.1016/j.dental.2009.11.004 ↗