journal article·2022-04

Computational and experimental comparison on the effects of flow-induced compression on the permeability of collagen gels

Christopher S. Vidmar, Marisa Bazzi, Victor K. Lai

Publisher page

Abstract

Collagen is a naturally occurring polymer and is popular in tissue engineering due to its high biocompatibility, ubiquity throughout the body, and its porous nature. The transport properties of collagen help dictate the delivery of nutrients to tissues, and the mechanical properties can help improve the function of engineered tissues. The objective of this study is to investigate experimentally the change in permeability as collagen gels undergo flow-induced compression and compare these results with model predictions using a finite element model. We developed a horizontal apparatus to measure the hydraulic permeability of collagen gels undergoing flow-induced compression. The permeability of 1.98 mg/mL, 3.5 mg/mL, and 5 mg/mL collagen Type I rat tail hydrogels were determined experimentally by tracking the pressure drop across the gels as water flowed through the samples, which simultaneously compressed them under pressure. The Holmes-Mow model was used to fit the permeability as the gels underwent compression. A finite element model was created using FEBio to estimate the Young's modulus of collagen gels at the macroscopic level by fitting the experimental pressure vs. the compressive stretch ratio to the model. Our results suggest that the initial permeability of collagen gels decreased with increasing concentration, as expected. However, gels with a lower initial concentration compressed to a greater degree, resulting in smaller final permeabilities once fully compressed. Taken together, our work suggests that the treatment of a collagen gel as an isotropic, elastic material is sufficient to model its transport properties on a macroscopic level but is inadequate if more localized transport properties, which are dependent on network architecture (such as collagen alignment or inhomogeneous densification), are required.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Collagen: Extraction and Characterization · Cellular Mechanics and Interactions · Tendon Structure and Treatment

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Use of multiple unconfined compression for control of collagen gel scaffold density and mechanical properties10.1039/b609784g ↗
2. A finite element solution for the anisotropic biphasic theory of tissue-equivalent mechanics: the effect of contact guidance on isometric cell traction measurement10.1115/1.2796090 ↗
3. An experimental-computational approach to quantify blood rheology in sickle cell disease10.1016/j.bpj.2020.10.011 ↗
4. Microstructural mechanics of collagen gels in confined compression: poroelasticity, viscoelasticity, and collapse10.1115/1.1688774 ↗
5. Effects of cell concentration and collagen concentration on contraction kinetics and mechanical properties in a bone marrow stromal cell-collagen construct10.1002/jbm.a.32606 ↗
6. Visco-anisotropic hyperelastic finite element analysis of knee joint considering deformation induced anisotropy evolution of meniscus
7. Investigation on the mechanical properties of contracted collagen gels as a scaffold for tissue engineering10.1046/j.1525-1594.2003.07187.x ↗
8. A linear, biphasic model incorporating a brinkman term to describe the mechanics of cell-seeded collagen hydrogels10.1007/s10439-011-0371-9 ↗
9. Gavin · 2013
10. β1 Integrin-mediated collagen gel contraction is stimulated by PDGF10.1016/0014-4827(90)90305-T ↗
11. Utilization of finite element analysis for articular cartilage tissue engineering10.3390/ma12203331 ↗
12. A theoretical and non-destructive experimental approach for direct inclusion of measured collagen orientation and recruitment into mechanical models of the artery wall10.1016/j.jbiomech.2011.11.016 ↗
13. The nonlinear characteristics of soft gels and hydrated connective tissues in ultrafiltration10.1016/0021-9290(90)90007-P ↗
14. Rheology of reconstituted type I collagen gel in confined compression10.1122/1.550817 ↗
15. Fibril reinforced poroelastic model predicts specifically mechanical behavior of normal, proteoglycan depleted, and collagen degraded articular cartilage10.1016/S0021-9290(03)00069-1 ↗
16. Collagen coated nanoliposome as a targeted and controlled drug delivery system10.1063/1.3504292 ↗
17. Microstructural and mechanical differences between digested collagen-fibrin co-gels and pure collagen and fibrin gels10.1016/j.actbio.2012.07.010 ↗
18. Mechanical behavior of collagen-fibrin Co-gels reflects transition from series to parallel interactions with increasing collagen content10.1115/1.4005544 ↗
19. Constitutive modeling of compressible type-I collagen hydrogels10.1016/j.medengphy.2018.01.003 ↗
20. Flow through interstitium and other fibrous matrices10.1113/expphysiol.1987.sp003085 ↗
21. The effect of highly inhomogeneous biphasic properties on mechanical behaviour of articular cartilage10.1016/j.cmpb.2021.106122 ↗
22. FEBio: finite elements for biomechanics10.1115/1.4005694 ↗
23. Microstructure and release characteristics of the minipellet, a collagen-based drug delivery system for controlled release of protein drugs10.1016/S0168-3659(99)00156-X ↗
24. Three-Dimensional mineralization of dense nanofibrillar Collagen−Bioglass hybrid scaffolds10.1021/bm1001087 ↗
25. Tuning three-dimensional collagen matrix stiffness independently of collagen concentration modulates endothelial cell behavior10.1016/j.actbio.2012.08.007 ↗
26. Nonlinear dependence of hydraulic conductivity on tissue deformation during intratumoral infusion10.1007/s10439-006-9136-2 ↗
27. Comparison between FEBio and Abaqus for biphasic contact problems10.1177/0954411913483537 ↗
28. The effect of collagen fibril orientation on the biphasic mechanics of articular cartilage10.1016/j.jmbbm.2016.09.001 ↗
29. Transforming growth factor beta stimulates collagen-matrix contraction by fibroblasts: implications for wound healing10.1073/pnas.85.13.4894 ↗
30. Effect of temperature, ph and ionic strength and composition on fibrin network structure and its development10.1016/0049-3848(86)90117-9 ↗
31. The effect of pore size on permeability and cell attachment in collagen scaffolds for tissue engineering
32. Influence of collagen concentration and glutaraldehyde on collagen-based scaffold properties10.1002/jbm.a.35671 ↗
33. A microstructurally based continuum model of cartilage viscoelasticity and permeability incorporating measured statistical fiber orientations10.1007/s10237-015-0685-x ↗
34. Diffusion and convection in collagen gels: implications for transport in the tumor interstitium10.1016/S0006-3495(02)73933-7 ↗
35. Predicting bulk mechanical properties of cellularized collagen gels using multiphoton microscopy10.1016/j.actbio.2010.07.004 ↗
36. Noninvasive assessment of collagen gel microstructure and mechanics using multiphoton microscopy10.1529/biophysj.106.097998 ↗
37. Tensile mechanical properties of three-dimensional type I collagen extracellular matrices with varied microstructure10.1115/1.1449904 ↗
38. Collagen as a carrier for on-site delivery of antibacterial drugs10.1016/j.addr.2003.08.007 ↗
39. Characterization of lymphangiogenesis in a model of adult skin regeneration10.1152/ajpheart.00038.2006 ↗
40. Hydraulic permeability of multilayered collagen gel scaffolds under plastic compression-induced unidirectional fluid flow10.1016/j.actbio.2012.08.031 ↗
41. Modeling the effect of collagen fibril alignment on ligament mechanical behavior10.1007/s10237-017-0977-4 ↗
42. Development of a three-dimensional unit cell to model the micromechanical response of a collagen-based extracellular matrix10.1016/j.actbio.2009.11.014 ↗
43. Interstitial flow and its effects in soft tissues10.1146/annurev.bioeng.9.060906.151850 ↗
44. The effects of collagen concentration and crosslink density on the biological, structural and mechanical properties of collagen-GAG scaffolds for bone tissue engineering10.1016/j.jmbbm.2008.08.007 ↗
45. Uncoupling shear and uniaxial elastic moduli of semiflexible biopolymer networks: compression-softening and stretch-stiffening10.1038/srep19270 ↗
46. Cell structure, stiffness and permeability of freeze-dried collagen scaffolds in dry and hydrated states10.1016/j.actbio.2016.01.041 ↗
47. Effect of fluid flow on smooth muscle cells in a 3-dimensional collagen gel model10.1161/01.ATV.20.10.2220 ↗
48. Finite element implementation of incompressible, transversely isotropic hyperelasticity10.1016/0045-7825(96)01035-3 ↗
49. Multiscale biphasic modelling of peritumoural collagen microstructure: the effect of tumour growth on permeability and fluid flow10.1371/journal.pone.0184511 ↗
50. Elastic moduli of collagen gels can Be predicted from two-dimensional confocal microscopy10.1016/j.bpj.2009.07.035 ↗
51. The effect of eosinophils on collagen gel contraction and implications for tissue remodelling10.1111/j.1365-2249.2004.02396.x ↗
52. Interstitial hydraulic conductivity in a fibrosarcoma10.1152/ajpheart.2000.279.6.H2726 ↗
53. Contraction of fibroblast-containing collagen gels: initial collagen concentration regulates the degree of contraction and cell survival10.1290/1071-2690(2001)037<0010:COFCCG>2.0.CO;2 ↗