journal article·2021-10

Optimizing the microstructure of a new machinable bioactive glass-ceramic

Juliana K.M.B. Daguano, Laís Dantas, Viviane O. Soares, Manuel F.R.P. Alves, Claudinei dos Santos, Edgar D. Zanotto

Publisher page

Abstract

Objectives This study aimed to optimize the crystallization process and the microstructure of a new bioactive glass-ceramic (GC) previously developed by our research group to obtain machinable glass-ceramics. Methods Differential scanning calorimetry (DSC) analyses were conducted to explore the characteristic temperatures and construct a semi-quantitative nucleation curve. The GC specimens were characterized by X-ray diffraction (XRD) and Rietveld refinement. Their brittleness index (B) and machinability were characterized and compared with IPS e.max-CAD®. Their Young's modulus, fracture toughness, and hardness were assessed. Results We found that the maximum crystal nucleation rate temperature of this GC is ~470 °C. Treatments were designed based on the 1st DSC peak onset (570 °C), 1st peak offset (650 °C), and 2nd peak offset (705 °C) crystallization temperatures of lithium metasilicate (LS, LiSi2O3) and lithium disilicate (LS2, Li2Si2O5). Rietveld refinement indicated an increase in LS2 and a reduction in LS and amorphous phase for increased temperatures and longer treatment times. Their B values indicate good machinability compared with that of the control group based on statistical analyses. As expected, lower levels of LS2 increase the machinability regardless of the rotation speed adopted, leading to a greater depth of cut and reduced Edge Chipping Damage Depth (ECDD). Conclusion This bioactive GC with optimized microstructure presents high machinability. For treatment temperatures above 570 °C, the number of elongated LS2 crystals increases and decreases the amorphous phase content, which reduce the machinability of the GC, and should therefore be avoided. The best results were obtained using heat treatment at 570 °C, which produces LS crystals embedded in a glassy matrix (67%) with small contents of secondary phases.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Zirconia based ceramics, some clinical and biological aspects: Review10.1016/j.fdj.2016.10.002 ↗
2. Elasticity, plasticity and analytical machinability prediction of lithium metasilicate/disilicate glass ceramics10.1016/j.jmbbm.2019.04.027 ↗
3. Nano-mechanical behaviour of lithium metasilicate glass-ceramic10.1016/j.jmbbm.2015.05.002 ↗
4. Influence of CAD/CAM milling, sintering and surface treatments on the fatigue behavior of lithium disilicate glass ceramic10.1016/j.jmbbm.2020.104133 ↗
5. Crystal structure analysis of Li3PO4 powder prepared by wet chemical reaction and solid-state reaction by using X-ray diffraction (XRD)10.1007/s11581-016-1643-z ↗
6. Design, selection and characterization of novel glasses and glass-ceramics for use in prosthetic applications10.1016/j.ceramint.2015.09.094 ↗
7. Machinability of fluormica glass-ceramics of high mica volume fraction10.1016/j.jeurceramsoc.2019.08.025 ↗
8. Assessment of brittleness in glass-ceramics and participate glass matrix composites by indentation data10.1007/BF00539954 ↗
9. Machinability and brittleness of glass-ceramics10.1016/S0924-0136(96)02275-3 ↗
10. Quantitative and qualitative analyses of ceramic chipping10.1016/j.jmbbm.2020.103928 ↗
11. Machinability: zirconia-reinforced lithium silicate glass ceramic versus lithium disilicate glass ceramic10.1016/j.jmbbm.2019.103435 ↗
12. CAD/CAM or conventional ceramic restorations longevity: systematic review and meta-analysis10.1016/j.dental.2018.08.060 ↗
13. Conshohocken · 2003 · 1
14. Biosilicate® - a multipurpose, highly bioactive glass-ceramic. in vitro, in vivo and clinical trials10.1016/j.jnoncrysol.2015.03.022 ↗
15. In vitro biocompatibility of new bioactive lithia-silica glass-ceramics10.1016/j.msec.2018.09.006 ↗
16. Mechanical properties of zirconia reinforced lithium silicate glass-ceramic10.1016/j.dental.2016.03.013 ↗
17. Crystal structure and compression of ruby to 46 kbar10.1063/1.324598 ↗
18. The inorganic crystal structure database (ICSD) - present and future10.1080/08893110410001664882 ↗
19. Quantitative phase analysis from neutron powder diffraction data using the Rietveld method10.1107/S0021889887086199 ↗
20. Mixed alkliane systems: structure and 29Si MASNMR of Li2Si2O5 and K2Si2O5.pdf10.1107/S0108768198001062 ↗
21. Kaur · 2019
22. Sequential usage of diamond bur for CAD/CAM milling: effect on the roughness, topography and fatigue strength of lithium disilicate glass ceramic10.1016/j.jmbbm.2018.12.037 ↗
23. History and trends of bioactive glass-ceramics10.1002/jbm.a.35639 ↗
24. Bioactive and inert dental glass-ceramics10.1002/jbm.a.35923 ↗
25. A fracture mechanics analysis of indentation-induced Palmqvist crack in ceramics10.1007/BF00725625 ↗
26. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
27. High-temperature single-crystal study of the cristobalite inversion
28. Determining the nucleation rate curve for lithium disilicate glass by differential thermal analysis10.1111/j.1151-2916.1990.tb06532.x ↗
29. Study on micro-grinding quality in micro-grinding tool for single crystal silicon10.1016/j.jmapro.2019.04.030 ↗
30. Principles of crystal phase formation in Ivoclar Vivadent glass-ceramics for dental restorations10.1016/j.jnoncrysol.2015.04.034 ↗
31. Strength-limiting damage and its mitigation in CAD-CAM zirconia-reinforced lithium-silicate ceramics machined in a fully crystallized state10.1016/j.dental.2020.09.012 ↗
32. A new low-brittleness glass in the soda-lime-silica glass family10.1111/j.1151-2916.1998.tb02649.x ↗
33. Brittleness of glasses by indentation10.1007/BF00318244 ↗
34. Crystallization of lithium disilicate-based multicomponent glasses - effect of silica/lithia ratio10.1016/j.ceramint.2014.08.074 ↗
35. Cutting characteristics of dental glass ceramics during in vitro dental abrasive adjusting using a high-speed electric handpiece10.1016/j.ceramint.2013.01.045 ↗
36. Brittleness index of machinable dental materials and its relation to the marginal chipping factor10.1016/j.jdent.2007.07.002 ↗
37. Residual stress effect on the fracture toughness of lithium disilicate glass-ceramics10.1111/jace.16664 ↗
38. Völlenkle · Verfeinerung Li2Ge03 · 1981 · 81 · 77
39. Temperature dependence of crystal nucleation in BaO·2SiO2 and 5BaO·8SiO2 glasses using differential thermal analysis10.1016/j.jnoncrysol.2016.12.032 ↗
40. Responses of pre-crystallized and crystallized zirconia-containing lithium silicate glass ceramics to diamond machining10.1016/j.ceramint.2019.09.170 ↗
41. Nucleation and crystallization of Na2O-2CaO-3SiO2 glass by differential thermal analysis10.1111/j.1151-2916.1991.tb04321.x ↗
42. Abrasive machining of porcelain and zirconia with a dental handpiece10.1016/S0043-1648(03)00195-9 ↗
43. Relationship between elastic and mechanical properties of dental ceramics and their index of brittleness10.1016/j.ceramint.2012.02.056 ↗
44. Application of the pattern-fitting structure-refinement method of X-ray powder diffractometer patterns10.1107/S0021889877013466 ↗
45. The crystallization and microstructure evolution of lithium disilicate-based glass-ceramic10.1016/j.jnoncrysol.2014.03.020 ↗