Influence of surface treatment of resin composite substrate on the load-bearing capacity under fatigue of lithium disilicate monolithic simplified restorations
Source abstract
Abstract
This study evaluated the influence of surface treatments of resin composite substrate on the fatigue behavior of adhesively cemented lithium disilicate glass-ceramic simplified restorations. CAD/CAM lithium disilicate ceramic blocks were shaped into discs (N = 60, Ø = 10 mm; thickness = 1.0 mm). Resin composite discs (N = 60, Ø = 10 mm, thickness = 2 mm) were allocated into four groups considering the "surface treatment" factor: Ctrl - no surface treatment; Bur - grinding with coarse diamond bur (#3101G, KG Sorensen); PA - etching with 37% phosphoric acid (15 s); AA - air abrasion with alumina particles (45 μm, 10 mm distance, 2.8 bars, 10 s). The surface topography, the roughness, the fractal dimension (estimated by the box-counting method) and the contact angle analyses were performed after the surface treatments. The lithium disilicate discs were etched (5% hydrofluoric acid, 20 s), silanized and adhesively cemented (Multilink N, Ivoclar Vivadent) on the resin composite discs. The samples (bonded restoration set) were subjected to a step-stress fatigue test at 20 Hz, 10,000 cycles/step with a step-size of 100 N applied on the ceramic surface, having ceramic up and resin composite down. Fractographic analysis was performed. The fatigue data (Fatigue Failure Load - FFL; and Cycles for Failure - CFF) were analyzed by Kaplan Meier with Mantel-Cox log-rank post-hoc tests (α = 0.05). No statistical difference for fatigue performance could be found among the groups (FFL means: 820-867 N; CFF means: 53,195-61,090 cycles). The bur group showed higher surface roughness and contact angle values. The PA group has the highest average fractal dimension. Therefore, the resin composite surface treatment induces topographical changes, however, it has no effect on the fatigue behavior of lithium disilicate restorations.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Substrate masking ability of bilayer and monolithic ceramics used for complete crowns and the effect of association with an opaque resin-based luting agent10.1016/j.jpor.2019.01.005 ↗
2. Bonfante
3. The contact mechanics of fractal surfaces10.1038/nmat855 ↗
4. Fatigue behavior of bonded lithium disilicate glass-ceramic simplified restorations is not damaged by the finishing/grinding of the bonding surface of dentin analogue material10.1016/j.ijadhadh.2021.102824 ↗
5. The fracture resistance of a CAD/CAM Resin Nano Ceramic (RNC) and a CAD ceramic at different thicknesses10.1016/j.dental.2014.05.018 ↗
6. Effect of composite surface treatment and aging on the bond strength between a core build-up composite and a luting agent10.1590/1678-775720140113 ↗
7. Dental ceramics: a review of new materials and processing methods10.1590/1807-3107bor-2017.vol31.0058 ↗
8. One-step ceramic primer as surface conditioner: effect on the load-bearing capacity under fatigue of bonded lithium disilicate ceramic simplified restorations10.1016/j.jmbbm.2020.103686 ↗
9. The effect of internal roughness and bonding on the fracture resistance and structural reliability of lithium disilicate ceramic10.1016/j.dental.2017.09.018 ↗
10. Fatigue strength of bilayered ceramics under cyclic loading as a function of core veneer thickness ratios10.1016/j.prosdent.2015.09.017 ↗
11. Effect of surface treatments on the tensile bond strength of repaired water-aged anterior restorative micro-fine hybrid resin composite10.1016/j.jdent.2008.07.014 ↗
12. Does luting strategy affect the fatigue behavior of bonded Y-TZP ceramic?
13. ISO 4287 · 1997
14. Clinically relevant approach to failure testing of all-ceramic restorations10.1016/S0022-3913(99)70103-4 ↗
15. Development of a clinically validated bulk failure test for ceramic crowns10.1016/S0022-3913(10)60129-1 ↗
16. Cleaning and conditioning of contaminated core build-up material before adhesive bonding10.3390/ma13122880 ↗
17. Effect of different surface treatments of resin relined fiber posts cemented with self-adhesive resin cement on push-out and microtensile bond strength tests10.2341/19-108-L ↗
18. Fatigue resistance of simplified CAD – CAM restorations : foundation material and ceramic thickness effects on the fatigue behavior of partially- and fully-stabilized zirconia10.1016/j.dental.2021.01.001 ↗
19. Clinical performance and failure modes of pulpless teeth restored with posts: a systematic review10.1590/1807-3107bor-2017.vol31.0064 ↗
20. A review of adhesion science10.1016/j.dental.2009.11.157 ↗
21. Does the application of an adhesive layer improve the bond strength of etched and silanized glass ceramics to resin-based materials? A systematic review and meta-analysis
22. Lithium disilicate glass-ceramic vs translucent zirconia polycrystals bonded to distinct substrates: fatigue failure load, number of cycles for failure, survival rates, and stress distribution10.1016/j.jmbbm.2018.12.010 ↗
23. Adhesion to a lithium disilicate glass ceramic etched with hydrofluoric acid at distinct concentrations10.1590/0103-6440201802080 ↗
24. How does hydrofluoric acid etching affect the cyclic load-to-failure of lithium disilicate restorations?10.1016/j.jmbbm.2018.07.040 ↗
25. Can fiber posts increase root stresses and reduce fracture?10.1177/0022034510363382 ↗
26. Effect of cement film thickness on the fracture resistance of a machinable glass-ceramic10.1016/0109-5641(94)90028-0 ↗
27. CAD-CAM milled versus pressed lithium-disilicate monolithic crowns adhesively cemented after distinct surface treatments: fatigue performance and ceramic surface characteristics10.1016/j.jmbbm.2019.03.005 ↗
28. Journal of the Mechanical Behavior of Biomedical Materials Accelerated loading frequency does not influence the fatigue behavior of polymer infiltrated ceramic network or lithium disilicate glass-ceramic restorations10.1016/j.jmbbm.2020.103905 ↗
29. Resistance of solid surfaces to wetting by water10.1021/ie50320a024 ↗