journal article·2022-05

Effects of material non-symmetry on the mechanical behavior of arterial wall

Hai-Chao Han

Publisher page

Abstract

Arteries are commonly assumed as symmetric cylindrical tubes with axisymmetric geometry and mechanical properties. However, their wall stress, structure and mechanical properties may become nonsymmetric when subject to torsion or complex mechanical loading. The objective of this study was to explore the nonsymmetric two fiber family constitutive models for arterial walls and examine the impact of this non-symmetry on the deformation and stress in arteries under mechanical loads. Our results demonstrated that nonsymmetric collagen fiber properties and alignment lead to interesting phenomena such as vessel twisting associated with axial stretch or pressurization. There are "magic" nonsymmetric fiber angles at which a vessel would not twist under given pressure and axial stretch. The nonsymmetric fiber properties and alignment (mean angle and dispersion) affects the torque-twist angle relationship as well as the axial stretch and pressurized inflation. These results illustrate the effects of nonsymmetric collagen fiber distribution and suggest that the Holzapfel-Gasser-Ogden models could be generalized to incorporate the nonsymmetric two fiber families for broader applications, especially when there is shear or torsion.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Elasticity and Material Modeling · Connective tissue disorders research · Coronary Interventions and Diagnostics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Collapse of diseased arteries with eccentric cross section10.1016/0021-9290(93)90044-F ↗
2. Finite Element simulation of buckling-induced vein tortuosity and influence of the wall constitutive properties10.1016/j.jmbbm.2013.05.006 ↗
3. Theory of small on large: potential utility in computations of fluid-solid interactions in arteries10.1016/j.cma.2006.06.018 ↗
4. Circumferential variation in mechanical characteristics of porcine descending aorta10.32604/biocell.2018.06114 ↗
5. In vivo MR angiographic quantification of axial and twisting deformations of the superficial femoral artery resulting from maximum hip and knee flexion10.1097/01.RVI.0000220367.62137.E8 ↗
6. Prediction of fibre architecture and adaptation in diseased carotid bifurcations10.1007/s10237-010-0277-8 ↗
7. Residual strain effects on the stress field in a thick wall finite element model of the human carotid bifurcation10.1016/S0021-9290(97)00025-0 ↗
8. Coronary artery dynamics in vivo10.1114/1.1467925 ↗
9. Comparison of biomechanical properties and microstructure of Trabeculae Carneae, papillary muscles, and myocardium in human heart10.1115/1.4041966 ↗
10. Fung · 1993
11. Twist buckling behavior of arteries10.1007/s10237-012-0453-0 ↗
12. Twist buckling of veins under torsional loading10.1016/j.jbiomech.2017.04.018 ↗
13. Hyperelastic modelling of arterial layers with distributed collagen fibre orientations10.1098/rsif.2005.0073 ↗
14. Hyperelastic modelling of arterial layers with distributed collagen fibre orientations10.1098/rsif.2005.0073 ↗
15. Slight asymmetry in the winding angles of reinforcing collagen can cause large shear stresses in arteries and even induce buckling10.1007/s11012-017-0646-9 ↗
16. Rotation, inversion and perversion in anisotropic elastic cylindrical tubes and membranes
17. Species dependence of the zero-stress state of aorta: pig versus rat10.1115/1.2895425 ↗
18. Stress-modulated collagen fiber remodeling in a human carotid bifurcation10.1016/j.jtbi.2007.05.037 ↗
19. Voltage-driven torsion of electroactive thick tubes reinforced with helical fibers10.1007/s00707-017-2103-1 ↗
20. A new constitutive framework for arterial wall mechanics and a comparative study of material models10.1023/A:1010835316564 ↗
21. Modelling non-symmetric collagen fibre dispersion in arterial walls10.1098/rsif.2015.0188 ↗
22. Modelling the layer-specific three-dimensional residual stresses in arteries, with an application to the human aorta10.1098/rsif.2009.0357 ↗
23. Stress-strain behavior of the passive basilar artery in normotension and hypertension10.1016/j.jbiomech.2006.11.007 ↗
24. Humphrey · 2002
25. Circumferential variations of mechanical behavior of the porcine thoracic aorta during the inflation test10.1016/j.jbiomech.2011.04.022 ↗
26. Effects of elastin degradation and surrounding matrix support on artery stability10.1152/ajpheart.00463.2011 ↗
27. Integrating structural heterogeneity, fiber orientation, and recruitment in multiscale ECM mechanics10.1016/j.jmbbm.2018.12.023 ↗
28. Artery buckling analysis using a four-fiber wall model10.1016/j.jbiomech.2014.06.005 ↗
29. Shear modulus of porcine coronary artery: contributions of media and adventitia10.1152/ajpheart.00357.2003 ↗
30. Three-dimensional bending, torsion and axial compression of the femoropopliteal artery during limb flexion10.1016/j.jbiomech.2014.04.053 ↗
31. Artery buckling analysis using a two-layered wall model with collagen dispersion10.1016/j.jmbbm.2016.03.007 ↗
32. Investigation of the optimal collagen fibre orientation in human iliac arteries10.1016/j.jmbbm.2015.06.011 ↗
33. Mechanical stresses in abdominal aortic aneurysms: influence of diameter, asymmetry, and material anisotropy10.1115/1.2898830 ↗
34. A method for planar biaxial mechanical testing that includes in-plane shear10.1115/1.2835086 ↗
35. Quantitative assessment of collagen fibre orientations from two-dimensional images of soft biological tissues10.1098/rsif.2012.0339 ↗
36. Determination of the layer-specific distributed collagen fibre orientations in human thoracic and abdominal aortas and common iliac arteries10.1098/rsif.2011.0727 ↗
37. Buckling of arteries with noncircular cross sections: theory and finite element simulations10.3389/fphys.2021.712636 ↗
38. Computational simulations of the helical buckling behavior of blood vessels10.1002/cnm.3277 ↗
39. A new three-dimensional exponential material model of the coronary arterial wall to include shear stress due to torsion10.1115/1.2948396 ↗
40. A model to determine the effect of collagen fiber alignment on heart function post myocardial infarction10.1186/1742-4682-11-6 ↗
41. Arterial wall remodeling under sustained axial twisting in rats10.1016/j.jbiomech.2017.06.013 ↗
42. Artery remodeling under axial twist in three days organ culture10.1007/s10439-014-1215-1 ↗