Modeling, design and tailoring of a tough, strong and stiff multilayered bone graft material
Source abstract
Abstract
Damage tolerance, stiffness, and strength are critical mechanical properties that are difficult to achieve concurrently in synthetic monolithic materials. This limits the range of certain applications, including in bone graft materials where bone-like mechanical reliance is desired. For example, calcium sulfate (CS) is a biologically compatible ceramic that possesses several properties of an ideal bone graft material, but its applications in medicine is limited by its brittleness. Brittleness may be alleviated by the addition of stronger and more ductile reinforcements, with the best mechanical improvements obtained when the layered architecture and the interfaces for these reinforcements are tailored. Here we propose a systematic modeling and design approach to tailor the architecture and properties of a multilayered bone graft material composed of a brittle ceramic and a more ductile material such as metals. More specifically, the volume fraction, moduli, number of layers, and the toughness of the interfaces between the different phases are tailored to maximize overall stiffness, strength, and energy absorption capacity. Our model predicts that when the stiffness of the reinforcement is higher (lower) than the ceramic, the beams with lower (higher) number of layers and higher (lower) volume fraction of metal are stronger. However, while the higher number of layers is always desired in terms of energy dissipation, the effects of other variables is more complex to understand and should thus be studied in conjunction with each other.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Advanced ceramic materials synthesis · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Anusavice · 2012
2. Architectured materials in engineering and biology: fabrication, structure, mechanics and performance10.1179/1743280415Y.0000000008 ↗
3. Structure and mechanics of interfaces in biological materials10.1038/natrevmats.2016.7 ↗
4. Titanium mesh-reinforced calcium sulfate for structural bone grafts10.1016/j.jmbbm.2021.104461 ↗
5. Toughening by metallic lamina in nickel/alumina composites10.1111/j.1151-2916.1993.tb03750.x ↗
6. A simple way to make tough ceramics10.1038/347455a0 ↗
7. A new theoretical model for development of damage tolerant composites10.1080/0371750X.2008.11078643 ↗
8. Flexural properties of brittle multilayer materials: I, modeling10.1111/j.1151-2916.1994.tb05350.x ↗
9. Flexural properties of brittle multilayer materials: II, experiments10.1111/j.1151-2916.1994.tb07100.x ↗
10. Combination of biological mechanisms for a concept study of a fracture-tolerant bio-inspired ceramic composite material10.1007/s10853-014-8511-x ↗
11. Fracture of metal/ceramic laminates—II. Crack growth resistance and toughness10.1016/S1359-6454(98)00358-9 ↗
12. The weak interfaces within tough natural composites: experiments on three types of nacre10.1016/j.jmbbm.2012.09.004 ↗
13. The true toughness of human cortical bone measured with realistically short cracks10.1038/nmat2221 ↗
14. Crack deflection and propagation in layered silicon nitride/boron nitride ceramics10.1111/j.1151-2916.1998.tb02438.x ↗
15. On the fracture of brittle-matrix/ductile-particle composites10.1080/01418618308236538 ↗
16. Layered silicon nitride-based composites with discontinuous boron nitride interlayers10.1111/j.1151-2916.2000.tb01582.x ↗
17. An investigation of the effects of ductile-layer thickness on the fracture behavior of nickel aluminide microlaminates10.1007/s11661-000-0257-1 ↗
18. Crack deflection at an interface between dissimilar elastic materials10.1016/0020-7683(89)90021-8 ↗
19. Selective crystal growth regulation by chiral α-hydroxycarboxylic acids improves the strength and toughness of calcium sulfate cements10.1021/acsabm.0c00918 ↗
20. Fracture behaviour of ceramic laminates in bending—I. Modelling of crack propagation10.1016/0956-7151(93)90014-J ↗
21. The conflicts between strength and toughness10.1038/nmat3115 ↗
22. Osteopontin deficiency increases bone fragility but preserves bone mass10.1016/j.bone.2010.02.014 ↗
23. Multilayer ceramic composites with high failure resistance10.1016/j.jeurceramsoc.2006.04.030 ↗
24. Control of composition and structure in laminated silicon nitride/boron nitride composites10.1111/j.1151-2916.2002.tb00480.x ↗
25. A route to increase fracture toughness of layered Si3N4/SiC composite using interlocked interfaces10.1016/j.ceramint.2015.04.102 ↗
26. Effect of geometrical factors on the mechanical properties of Si3N4/BN multilayer ceramics10.1016/S0272-8842(03)00129-9 ↗
27. R-curve behaviour in weak interface-toughened SiC-C laminates by discrete element modelling10.1016/j.jeurceramsoc.2013.08.021 ↗
28. Large scale bridging in brittle matrix composites10.1016/0956-7151(90)90301-V ↗