journal article·2022-11

Composition optimization of PLA/PPC/HNT nanocomposites for mandibular fixation plate using single-factor experimental design

Intan Najwa Humaira Mohamed Haneef, Yose Fachmi Buys, Norhashimah Mohd Shaffiar, Abdul Malek Abdul Hamid, Sharifah Imihezri Syed Shaharuddin, Fitriani

Publisher page

Abstract

The need to overcome the secondary surgery to remove implanted metal fixation plate leads to the idea of replacing the material with degradable bionanocomposite. In this research, polylactic acid/polypropylene (PLA/PPC) blends incorporated with halloysite nanotubes (HNT) (0-6 wt %) were considered as the candidate material for mandibular fixation plate. A single-factor design using Design Expert software was used to determine 20 different compositions of PLA/PPC/HNT nanocomposites and their mechanical properties were then measured. The optimization of the PLA/PPC/HNT nanocomposite composition was performed based on the nanocomposite's response to Young's modulus, tensile strength, and elongation at break. Further analysis suggested an optimum composition of 92.5/7.5 PLA/PPC with 6 wt % of HNT. The statistical results predicted that there was a 71.7% possibility that the proposed nanocomposite would have the following mechanical properties: Young's modulus of 2.18 GPa, a tensile strength of 64.16 MPa, and an elongation at break of 106.53%.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Facial Trauma and Fracture Management · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Optimization of wear characteristics of PLA material reinforced with HAP nanoparticle by using Taguchi technique10.1088/1757-899X/810/1/012079 ↗
2. Ajana · 2015
3. The effects of tensile properties of PLA/HNTS-ZrO2 bionanocomposites
4. Maintained individual data distributed likelihood estimation (MIDDLE)10.1080/00273171.2015.1094387 ↗
5. Metallic implant biomaterials10.1016/j.mser.2014.10.001 ↗
6. Ten-year retrospective study on mandibular fractures in central Taiwan10.1177/0300060520915059 ↗
7. Physical and mechanical properties of PLA, and their functions in widespread applications-A comprehensive review10.1016/j.addr.2016.06.012 ↗
8. Mechanical, morphological, thermal properties and hydrolytic degradation behavior of polylactic acid/polypropylene carbonate blends prepared by solvent casting10.1002/pen.25519 ↗
9. Miscibility, mechanical, and thermal properties of polylactic acid/polypropylene carbonate (PLA/PPC) blends prepared by melt mixing method10.1016/j.matpr.2019.06.332 ↗
10. Finite element analysis (FEA) of polylactic acid/polypropylene carbonate (PLA/PPC) blends fixation plate for craniomaxillofacial surgery10.1108/IJSI-05-2019-0048 ↗
11. Haribhakti · 2019
12. Prediction of water and oil percolation thresholds of a microemulsion by modeling of dynamic viscosity using response surface methodology10.1016/j.jiec.2012.09.027 ↗
13. Clinical usefulness of fixation of absorbable implants with cyanoacrylate in comminuted fractures of the maxilla10.7181/acfs.2019.00325 ↗
14. Overview of innovative advances in bioresorbable plate systems for oral and maxillofacial surgery10.1016/j.jdsr.2018.03.003 ↗
15. Optimization of biodegradation conditions for cyanide removal by Serratia marcescens strain AQ07 using one-factor-at-a-time technique and response surface methodology10.1007/s12210-016-0516-8 ↗
16. Miniplate removal in operated cases of maxillofacial region in a dental institute in Rajasthan, India10.15386/mpr-1195 ↗
17. Engineered carbon nanotubes reinforced polymer composites for enhanced thermoelectric performance10.1088/2053-1591/aa89a7 ↗
18. A comprehensive Review of design of experiment (DOE) for water and wastewater -key concepts, methodology and contextualized application
19. A review on carbon nanotubes and graphene as fillers in reinforced polymer nanocomposites
20. Strategies for enhancing polyester-based materials for bone fixation applications10.3390/molecules26040992 ↗
21. Thermal stability and surface wettability studies of polylactic acid/halloysite nanotube nanocomposite scaffold for tissue engineering studies
22. Poly (lactic acid) blends : processing , properties and applications10.1016/j.ijbiomac.2018.12.002 ↗
23. Rheology of poly (lactic acid) -based systems
24. Mandibular reconstruction : a clinical evaluation of the La-Co-CE segmental defect classification system
25. Locked anatomic plate fixation in displaced clavicular fractures10.3944/AOTT.2012.2715 ↗
26. Biodegradable materials and metallic implants-A review10.3390/jfb8040044 ↗
27. State of art on solvent casting particulate leaching method for orthopedic scaffolds fabrication10.1016/j.matpr.2017.01.101 ↗
28. Biomechanics of alloplastic mandible reconstruction using biomaterials: the effect of implant design on stress concentration influences choice of material
29. Bending strength and biological properties of PLA-HA composites for femoral canine bone fixation plate10.1088/1757-899X/635/1/012004 ↗
30. Poly-lactic-acid: potential material for bio-printing applications
31. 3D printed biodegradable composites: an insight into mechanical properties of PLA/chitosan scaffold10.1016/j.polymertesting.2020.106722 ↗
32. Investigation and modeling of cyclic aging using a design of experiment with automotive grade lithium-ion cells
33. Optimization by design of experiment techniques
34. Bioactive glass-containing cranial implants: an overview10.1007/s10853-017-0888-x ↗
35. Nanotubes as polymer composite reinforcing additive materials - a comparative study
36. Regenerative models for the integration and regeneration of head skeletal tissues10.3390/ijms19123752 ↗
37. Effect of forming conditions of poly-lactic acid/hydroxyapatite to tensile strength of canine bone fixation plate using full factorial experimental design
38. Advances in halloysite nanotubes-polysaccharide nanocomposite preparation and applications10.3390/polym11060987 ↗