journal article·2023-02

Dynamic load response of human dura mater at different velocities

J. Zwirner, B. Ondruschka, M. Scholze, A. Thambyah, J. Workman, N. Hammer, J.A. Niestrawska

Publisher page

Abstract

Despite of its assumed role to mitigate brain tissue response under dynamic loading conditions, the human dura mater is frequently neglected in computational and physical human head models. A reason for this is the lack of load-deformation data when the dura mater is loaded dynamically. To date, the biomechanical characterization of the human dura mater predominantly involved quasi-static testing setups. This study aimed to investigate the strain rate-dependent mechanical properties of the human dura mater comparing three different velocities of 0.3, 0.5 and 0.7 m/s. Samples were chosen in a perpendicular orientation to the visible main fiber direction on the samples' surface, which was mostly neglected in previous studies. The elastic modulus of dura mater significantly increased at higher velocities (5.16 [3.38; 7.27] MPa at 0.3 m/s versus 44.38 [35.30; 74.94] MPa at 0.7 m/s). Both the stretch at yield point λf (1.148 [1.137; 1.188] for 0.3 m/s, 1.062 [1.054; 1.066] for 0.5 m/s and 1.015 [1.012; 1.021] for 0.7 m/s) and stress at yield point σf of dura mater (519.14 [366.74; 707.99] kPa for 0.3 m/s versus 300.52 [245.31; 354.89] kPa at 0.7 m/s) significantly decreased with increasing velocities. Conclusively, increasing the load application velocity increases stiffness and decreases tensile strength as well as straining potential of human dura mater between 0.3 and 0.7 m/s. The elastic modulus of human dura mater should be adapted to the respective velocities in computational head impact simulations.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Automotive and Human Injury Biomechanics · Elasticity and Material Modeling · Traumatic Brain Injury and Neurovascular Disturbances

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Effect of strain rate on the fracture behaviour of collagen10.1007/BF00540684 ↗
2. Effect of strain rate on the fracture behaviour of skin10.1007/BF02716820 ↗
3. An imaging-based computational and experimental study of skull fracture: finite element model development10.1089/neu.1995.12.679 ↗
4. Dynamic material properties of human and animal livers
5. Development of a skull/brain model for military wound ballistics studies10.1007/s00414-014-1073-2 ↗
6. A finite element method parametric study of the dynamic response of the human brain with different cerebrospinal fluid constitutive properties10.1243/09544119JEIM631 ↗
7. Histological and biomechanical study of dura mater applied to the technique of dura splitting decompression in Chiari type I malformation10.1007/s10143-010-0261-x ↗
8. Computational biology — modeling of primary blast effects on the central nervous system10.1016/j.neuroimage.2009.02.019 ↗
9. Small female head and neck interaction with a deploying side airbag10.1016/S0001-4575(02)00085-4 ↗
10. Finite element analysis of helmeted oblique impacts and head injury evaluation with a commercial road helmet10.12989/sem.2013.48.5.661 ↗
11. A viscoelastic study of scalp, brain, and dura10.1016/0021-9290(70)90007-2 ↗
12. Dynamic tensile properties of human skin
13. The influence of heterogeneous meninges on the brain mechanics under primary blast loading10.1016/j.compositesb.2012.04.014 ↗
14. Quantification of the collagen fibre architecture of human cranial dura mater10.1046/j.1469-7580.1998.19210099.x ↗
15. The creation of three-dimensional finite element models for simulating head impact biomechanics10.1533/ijcr.2003.0243 ↗
16. Comparison of biomechanical properties of dura mater substitutes and cranial human dura mater : an in vitro study10.3340/jkns.2019.0122 ↗
17. Influence of impact direction on the human head in prediction of subdural hematoma10.1089/089771503765172327 ↗
18. A QCT-based nonsegmentation finite element head model for studying traumatic brain injury
19. Protection of cortex by overlying meninges tissue during dynamic indentation of the adolescent brain10.1016/j.actbio.2017.05.022 ↗
20. Development of a finite element human head model partially validated with thirty five experimental cases10.1115/1.4025101 ↗
21. An actuated force feedback-enabled laparoscopic instrument for robotic-assisted surgery10.1002/rcs.1503 ↗
22. Strain rate and anisotropy effects on the tensile failure characteristics of human skin10.1016/j.jmbbm.2014.10.006 ↗
23. Systematic review and meta-analysis of the biomechanical properties of the human dura mater applicable in computational human head models10.1007/s10237-022-01566-5 ↗
24. High velocity gunshot injuries to the extremities: management on and off the battlefield10.1007/s12178-015-9289-4 ↗
25. Acellularization-induced changes in tensile properties are organ specific-an in-vitro mechanical and structural analysis of porcine soft tissues10.1371/journal.pone.0151223 ↗
26. Utilization of 3D printing technology to facilitate and standardize soft tissue testing10.1038/s41598-018-29583-4 ↗
27. Standardized tensile testing of soft tissue using a 3D printed clamping system10.1016/j.ohx.2020.e00159 ↗
28. Dissection properties of the human aortic media: an experimental study10.1115/1.2898733 ↗
29. High-speed documented experimental gunshot to a skull-brain model and radiologic virtual autopsy10.1097/00000433-200209000-00003 ↗
30. The dynamic development of the muzzle imprint by contact gunshot: high-speed documentation utilizing the “skin–skull–brain model”10.1016/S0379-0738(02)00117-2 ↗
31. The 'Skin-skull-brain model': a new instrument for the study of gunshot effects10.1016/S0379-0738(01)00637-5 ↗
32. The mechanical properties of human dura mater and the effects of storage media10.1088/0143-0815/2/3/003 ↗
33. Concussion in professional football: brain responses by finite element analysis: part 910.1227/01.NEU.0000186950.54075.3B ↗
34. Walsh, D.R., Ross, A.M. Newport, D.T., Zhou, Z., Kearns, J., Fearon, C., Lorigan, J., Mulvihill, J.J.E., 2021. Mechanical characterisation of the human dura mater, falx cerebri and superior sagittal sinus. Acta Biomater.143, 388–400, doi:10.1016/j.actbio.2021.07.043.10.1016/j.actbio.2021.07.043 ↗
35. A modified human head model for the study of impact head injury10.1080/10255842.2010.506435 ↗
36. A sensorless force-feedback system for robot-assisted laparoscopic surgery10.1080/24699322.2018.1557887 ↗
37. Suicide by the intraoral blast of firecrackers - experimental simulation using a skull simulant model10.1007/s00414-017-1580-z ↗
38. Mechanical and morphological description of human acellular dura mater as a scaffold for surgical reconstruction10.1016/j.jmbbm.2019.04.035 ↗
39. Mechanical properties of human dura mater in tension – an analysis at an age range of 2 to 94 years10.1038/s41598-019-52836-9 ↗