journal article·2023-07

Investigation on the improvement of mechanical properties and surface quality of the polylactic acid (PLA) fused filament fabrication parts manufactured without and with vibrations dependent utilization

Yannick Siyajeu, Shijie Jiang, Bangchun Wen, He Li

Publisher page

Abstract

Fused Filament Fabrication (FFF), is one of the most widely used additive manufacturing technologies today, which has been used for a variety of applications. Due to the layer-by-layer manufacturing process, FFF parts are inferior to those fabricated by traditional methods in terms of tensile properties, which is one of the most significant defects that hinder the development of this technique. In this study, a vibration was utilized during the FFF process by piezoelectric ceramics electric plates to improve the mechanical properties of the built parts and surface quality of PLA FFF parts. Subsequently, an investigation of the tensile and the surface quality of PLA FFF specimens built-in X and Z-direction fabricated individually without and with vibrations utilized has been done. Furthermore, a theoretical model has been established to predict the tensile strength and plasticity of FFF parts fabricated without and with vibrations utilized based on classical laminated plate theory, with the anisotropic and laminated characteristics taken into consideration. Young's modulus model has been established based on the laminated plate theory and flexural vibration theoretical approaches of a plate for the PLA FFF parts manufactured without and with vibrations utilized respectively. Compared with the previous models this model provides the tensile strength and plasticity of FFF parts both manufactured without and with vibrations utilized. The results indicate that the predicted tensile strength and plasticity of the PLA FFF parts manufactured with vibrations utilized have a good consistency with the experimental ones, meanwhile, vibration utilization can significantly improve the surface quality of the PLA FFF samples manufactured in the Z-direction, and the scanning electron microscopy (SEM) analysis confirmed that vibration utilization can improve the forming quality of FFF manufactured parts.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials · Prosthetics and Rehabilitation Robotics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Elastic properties of 3D printed fiber-reinforced structures10.1016/j.compstruct.2018.03.051 ↗
2. Alafagahani · 2017 · 793
3. Dynamic mechanical properties of ABS material processed by fused deposition modelling
4. Balasubramani · 2018
5. Development of rapid tooling using fused deposition Modelling: a review10.1108/RPJ-04-2014-0048 ↗
6. Buj-corra influence of print orientation on surface roughness in fused deposition modelling (FDM) process10.3390/ma12233834 ↗
7. Characterization for the elastic constants of fused deposition modelling-fabricated materials based on the virtual fields methods and digital images correlation10.1007/s10409-017-0719-y ↗
8. Cardenas · 2016
9. Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory10.1016/j.matdes.2015.11.009 ↗
10. Additive manufacturing of PLA structures using fused deposition modelling: effect of process parameters on mechanical properties and their optical selection10.1016/j.matdes.2017.03.065 ↗
11. Effect of printing parameters and post-process on surface roughness and dimensional deviation of PLA parts fabricated by extrusion-based 3D printing10.1007/s40430-022-03429-7 ↗
12. Es-Said Effect of layer orientation on mechanical properties of rapid prototyped samples
13. Physical and mechanical properties of PLA and their functions in widespread applications: a Comprehensive review10.1016/j.addr.2016.06.012 ↗
14. Effect of layer thickness and printing orientation on mechanical properties and dimensional accuracy of 3D printed porous samples for bone tissue engineering10.1371/journal.pone.0108252 ↗
15. Application of vibration in laser Power Deposition process10.1016/j.jmapro.2009.07.002 ↗
16. Jerez-Mesa Fatigue performance of fused filament fabrication PLA specimens10.1016/j.matdes.2017.11.072 ↗
17. Effect of ultrasonic vibration on mechanical properties of 3D printing non-crystalline and semi-crystalline polymers
18. Hill · 1950
19. Hui · 2019 · 394
20. Thermo-mechanical characterization of metal polymer composite filaments and printing parameters study for fused deposition modeling in the 3D printing process10.1007/s11664-014-3425-6 ↗
21. Yannick Siyajeu Improvement the forming Quality of fused filament fabrication parts by vibrations applied10.1108/RPJ-12-2018-0314 ↗
22. Experimental study on Improvement the mechanical properties of material in rapid prototyping polyactic acid parts by vibrations applied10.3390/app11041820 ↗
23. Jiang · 2021
24. Jiang · 2023 · 1
25. An investigation of surface quality characteristics of 3d printed PLA plates cut by CO2 laser using experimental design10.1080/10426914.2021.1906892 ↗
26. Laser cutting of 3D printed acrylonitrile butadiene styrene plates for dimensional and surface roughness optimization10.1007/s00170-021-08350-2 ↗
27. Stereolithography process optimization for tensile strength improvement of products10.1108/RPJ-05-2015-0049 ↗
28. Krirchner · 1984
29. Lalehpour A more accurate analytical formulation of surface roughness in layer-based additive manufacturing to enhance the product's precision10.1007/s00170-017-1448-x ↗
30. Composites modelling and analysis for fabrication of FDM prototypes with locally controlled Properties10.1016/S1526-6125(02)70139-4 ↗
31. Li Theoretical modelling and prediction of surface roughness for hybrid additive-subtractive manufacturing processes
32. On the substantial mechanical reinforcement of Polylactic Acid with Titanium Nitride ceramic nano fillers in materials extrusion 3D printing10.1016/j.ceramint.2023.02.001 ↗
33. Influence of vibration amplitude on the ultrasonic dispersion of soils International
34. Evaluation and prediction of tensile properties of continuous fiber-reinforced 3D printed structures10.1016/j.compstruct.2016.07.018 ↗
35. Nanchariaah Experimental investigation on surface quality and dimensional accuracy of FDM components
36. Optimization of key quality indicators in materials extrusion 3D printing of acrylonitrile butadiene stryrene: the impact of critical process control parameters on the surface roughness, dimensional accuracy and porosity
37. Additive manufacturing of carbon fiber reinforced thermoplastic composite using FDM10.1016/j.compositesb.2015.06.013 ↗
38. Ochoa · 1992
39. Papon · 2019
40. Panchadhyayee Determination of Young's modulus by studying the flexural vibrations of a bar: experimental and theoretical approaches
41. Failure analysis and characterization of 3D printed ABS with respect to layer thickness and orientation10.1007/s11668-016-0113-2 ↗
42. Advancing PLA 3Dprinting with laser polishing: improving mechanical strength, substability, and surface quality
43. Design of fused-deposition ABS components for stiffness and strength10.1115/1.1582499 ↗
44. Rodríguez Mechanical behavior of acrylonitrile butadiene styrene (ABS) fused deposition materials. Experimental investigation
45. K Saeed, Predication of the in-plane mechanical properties of continuous carbon fiber reinforced 3D printed polymer composites using classical laminated plate theory Compos. Struct. (259) 2020 2113 Doi:10.1016/j.j.compstruct.2020.1.113226.10.1016/j.compstruct.2020.113226 ↗
46. Sammaiah the influence of process parameters on the surface roughness of the 3d printed parts in FDM process
47. Prediction materials properties for embedded structures manufacturing
48. Somireddy · 2019
49. Parametric appraisal of mechanical properties of fused deposition modelling processed parts10.1016/j.matdes.2009.06.016 ↗
50. Sunil · 2018 · 187
51. Effect of Ultrasonic vibration on inter layer Adhesion Fused filament Fabrication 3D printed ABS10.3390/polym11020315 ↗
52. J Mechanical property optimization of FDM PLA in shear with multiple objectives
53. Gold Impact absorption capacity of 3D-printed components fabricated by fused deposition modeling10.1016/j.matdes.2016.03.154 ↗
54. Vyavahane Experimental study of surface roughness, dimensional accuracy and time of fabrication of parts produced by fused deposition modelling
55. A method to predict the ultimate tensile strength of 3D printing polylactic acid (PLA) materials with different printing orientations10.1016/j.compositesb.2019.01.025 ↗
56. Yu · 2019
57. Zou · 2016 · 506