The influence of plasticizer on the mechanical, structural, thermal and strain recovery properties following stress-relaxation process of silk fibroin/sodium alginate biocomposites for biomedical applications
Source abstract
Abstract
The influence of plasticizer glycerol (GLY) on the mechanical, structural, and thermal properties of silk fibroin (SF)/sodium alginate (SA) biocomposite films was investigated in detail. As the SF/SA ratio increased up to 65%, the SF content significantly improved the Tensile strength (σT), Young's modulus (Ey) but reduced the elongation at break (εb). To modify and enhance the elasticity and flexibility of the biocomposite films, the GLY as a plasticizer was used at different ratio from 20 to 50% for each SF/SA biocomposite films. Although the extensibility of the films was improved greatly with increasing GLY ratio, σT and Ey reduced significantly. The effect was observed more apparently for the GLY ratio starting from 35%. It was also shown that crystallinity index in the Amide I region increased as the SF/SA ratio increased to 65%. Increasing SF content improved the thermal stability of the SF/SA biocomposites. The XRD results showed that crystallinity was increased as SF/SA ratio increased. Stress-relaxation of SF/SA (30%) biocomposite films plasticized with GLY revealed that each kind of plasticized films showed a viscoelastic behavior and a fast relaxation in the first stage (1-2 min) of the processes and then continued slowly. The GLY increased the extensibility and elasticity limit of the SF/SA (30%) composite films. During the strain recovery processes, the plasticized composite films recovered completely in a quite shorter time than that of unplasticized films. It was observed higher the GLY content, the recovery times became shorter.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silk-based biomaterials and applications · Bone Tissue Engineering Materials · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (86)
Show source-provided references
1. Alginate in wound dressings10.3390/pharmaceutics10020042 ↗
2. Temperature effect on the recovery process in stretched Bombyx mori silk fibers10.1016/j.saa.2015.01.105 ↗
3. Mechanical properties of Bombyx mori silk yarns studied with tensile testing method10.1002/app.30167 ↗
4. Silk-based biomaterials10.1016/S0142-9612(02)00353-8 ↗
5. Characterization of sodium alginate based films
6. Preparation, characterization, and application of sodium alginate/ε-polylysine layer-by-layer self-assembled edible film10.3390/coatings13030516 ↗
7. Crystallinity in silk fibers: partial acid hydrolysis and related studies10.1002/app.1980.070250518 ↗
8. Controlling alginate gel degradation utilizing partial oxidation and bimodal molecular weight distribution10.1016/j.biomaterials.2004.06.044 ↗
9. Fish collagen/alginate/chitooligosaccharides integrated scaffold for skin tissue regeneration application10.1016/j.ijbiomac.2015.08.038 ↗
10. Effect of different additives in diets on secondary structure, thermal and mechanical properties of silkworm silk10.3390/ma12010014 ↗
11. Biocomposite membranes of sodium alginate and silk fibroin fibers for biomedical applications10.1002/app.39598 ↗
12. Silk fibroin and sodium alginate blend: miscibility and physical characteristics10.1016/j.msec.2014.03.047 ↗
13. Interactions between gelatin and sodium alginate: UV and FTIR studies10.1080/01932691.2019.1611437 ↗
14. Fluorescence quenching studies with proteins10.1016/0003-2697(81)90474-7 ↗
15. Structure and physical properties of silk fibroin/polyacrylamide blend films10.1002/(SICI)1097-4628(19990307)71:10<1563::AID-APP4>3.0.CO;2-E ↗
16. Properties of glycerol-plasticized alginate films obtained by thermo-mechanical mixing10.1016/j.foodhyd.2016.09.023 ↗
17. Crystallinity and degradation of silk: correlations between analytical signatures and physical condition on ageing10.1007/s00339-007-4218-z ↗
18. Structural and mechanical characteristics of silk fibroin and chitosan blend scaffolds for tissue regeneration10.1002/jbm.a.30382 ↗
19. The mechanical design of spider silks: from fibroin sequence to mechanical function10.1242/jeb.202.23.3295 ↗
20. How to improve physico-chemical properties of silk fibroin materials for biomedical applications?—blending and cross-linking of silk fibroin—a review10.3390/ma14061510 ↗
21. Transparency of polymeric food packaging materials10.1016/j.foodres.2022.111792 ↗
22. Casting antimicrobial packaging films and measuring their physical properties and antimicrobial activity10.1177/875608799701300405 ↗
23. Changes in the properties and protein structure of silk fibroin molecules in autoclaved fabrics10.1016/j.polymdegradstab.2014.12.007 ↗
24. Alginate/graphene oxide fibers with enhanced mechanical strength prepared by wet spinning10.1016/j.carbpol.2012.01.071 ↗
25. Determining beta-sheet crystallinity in fibrous proteins by thermal analysis and infrared spectroscopy10.1021/ma0610109 ↗
26. Effect of water on the thermal properties of silk fibroin10.1016/j.tca.2006.12.011 ↗
27. Sodium alginate/graphene oxide composite films with enhanced thermal and mechanical properties10.1016/j.carbpol.2013.01.065 ↗
28. Biomaterial films of Bombyx mori silk fibroin with poly(ethylene oxide)10.1021/bm0343287 ↗
29. Water-stable silk films with reduced β-sheet content10.1002/adfm.200400405 ↗
30. Influence of alcohol treatments on properties of silk-fibroin-based films for highly optically transparent coating applications10.1039/D0RA02634D ↗
31. Green synthesis of novel silver nanocomposite hydrogel based on sodium alginate as an efficient biosorbent for the dye wastewater treatment: prediction of isotherm and kinetic parameters10.1080/19443994.2016.1178178 ↗
32. Effect of processing conditions on the homogeneity of partially degummed silk evaluated by FTIR spectroscopy
33. Interaction between fibroin and alginate in the corresponding blended films
34. Degradation markers of fibroin in silk through infrared spectroscopy10.1016/j.polymdegradstab.2014.04.008 ↗
35. Stress relaxation and inverse stress relaxation in silk fibers10.1002/app.1949 ↗
36. Highly elastomeric photocurable silk hydrogels10.1016/j.ijbiomac.2019.05.068 ↗
37. Composition optimization of polyvinyl alcohol/rice starch/silk fibroin-blended films for improving its eco-friendly packaging properties10.1002/app.38977 ↗
38. Effects of ultraviolet light irradiation on silk fibroin films prepared under different conditions10.3390/biom11010070 ↗
39. Silk fibroin/chitosan scaffold with tunable properties and low inflammatory response assists the differentiation of bone marrow mesenchymal stem cells10.1016/j.ijbiomac.2017.07.080 ↗
40. A promising wound dressing material with excellent cytocompatibility and proangiogenesis action for wound healing: strontium loaded Silk fibroin/Sodium alginate (SF/SA) blend films10.1016/j.ijbiomac.2017.07.020 ↗
41. Improvements of the physical properties of fibroin membranes with sodium alginate10.1002/app.1992.070451108 ↗
42. Effect of polysaccharide nanocrystals on structure, properties, and drug release kinetics of alginate-based microspheres10.1016/j.colsurfb.2011.02.039 ↗
43. Insoluble and flexible silk films containing glycerol10.1021/bm900993n ↗
44. Study on light aging of silk fabric by fourier transform infrared spectroscopy and principal component analysis10.1080/00032719.2012.673098 ↗
45. A novel silk fibroin/sodium alginate hybrid scaffolds10.1002/pen.23542 ↗
46. Crystal growth of calcium carbonate in silk fibroin/sodium alginate hydrogel10.1016/j.jcrysgro.2013.09.050 ↗
47. Mycobased synthesis of silver nanoparticles and their incorporation into sodium alginate films for vegetable and fruit preservation10.1021/jf900337h ↗
48. Regenerated silk fibroin films: thermal and dynamic mechanical analysis10.1002/1521-3935(200207)203:10/11<1658::AID-MACP1658>3.0.CO;2-3 ↗
49. T-shaped microfluidic junction processing of porous alginate-based films and their characteristics10.3390/polym11091386 ↗
50. A polymer blend from Gum Arabic and Sodium Alginate - preparation and characterization10.1007/s10965-020-02128-y ↗
51. Aligned silk-based 3-D architectures for contact guidance in tissue engineering10.1016/j.actbio.2011.12.015 ↗
52. Silk fibroin/chitosan/alginate multilayer membranes as a system for controlled drug release in wound healing10.1016/j.ijbiomac.2020.02.140 ↗
53. Mechanical properties of single-brin silkworm silk10.1002/(SICI)1097-4628(20000307)75:10<1270::AID-APP8>3.0.CO;2-C ↗
54. Silk hydrogel substrate stress relaxation primes mesenchymal stem cell behavior in 2D10.1021/acsami.1c09071 ↗
55. Alginate: from food industry to biomedical applications and management of metabolic disorders
56. Preparation and characterization of silk fibroin-polyvinyl alcohol (PVA) blend films for food packaging materials10.1016/j.matpr.2022.02.034 ↗
57. Tensile stress-strain and recovery behavior of Indian silk fibers and their structural dependence10.1002/1097-4628(20000912)77:11<2418::AID-APP10>3.0.CO;2-Q ↗
58. Features of supercooled glycerol dynamics10.1103/PhysRevB.67.132202 ↗
59. Recent advances in mechanical properties of biopolymer composites: a review10.1002/pc.25356 ↗
60. Eggshell membrane protein modified silk fibroin-poly vinyl alcohol scaffold for bone tissue engineering: in vitro and in vivo study10.4028/www.scientific.net/JBBBE.32.69 ↗
61. Modified silk fibroin scaffolds with collagen/decellularized pulp for bone tissue engineering in cleft palate: morphological structures and biofunctionalities10.1016/j.msec.2015.09.031 ↗
62. Dielectric investigation of NaLiS nanoparticles loaded on alginate polymer matrix synthesized by single pot microwave irradiation10.1007/s10904-017-0710-x ↗
63. Fourier transform Raman and fourier transform infrared spectroscopy studies of silk fibroin10.1002/app.21346 ↗
64. Sodium alginate and its blends with starch: thermal and morphological properties10.1002/app.28625 ↗
65. Soft-matrices based on silk fibroin and alginate for tissue engineering10.1016/j.ijbiomac.2016.04.045 ↗
66. The influence of UV radiation on silk fibroin10.1016/j.polymdegradstab.2011.01.001 ↗
67. The influence of UV-irradiation on thermal and mechanical properties of chitosan and silk fibroin mixtures10.1016/j.jphotobiol.2014.08.017 ↗
68. One pot synthesis and characterization of alginate stabilized semiconductor nanoparticles10.5012/bkcs.2012.33.10.3218 ↗
69. IR study on the binding mode of metal cations to chemically modified Bombyx mori and Tussah silk fibres10.1016/S0022-2860(02)00663-4 ↗
70. Phase separation structure in poly(vinyl alcohol)/silk fibroin blend films10.1002/(SICI)1097-0126(199802)45:2<175::AID-PI883>3.0.CO;2-K ↗
71. Rheological and mechanical behavior of silk fibroin reinforced waterborne polyurethane10.3390/polym8030094 ↗
72. Bio-composite films based on alginate and rice husk tar microparticles loaded with eugenol for active packaging10.1007/s12649-022-01679-z ↗
73. Structural characteristics and properties of the regenerated silk fibroin prepared from formic acid10.1016/S0141-8130(01)00159-3 ↗
74. Silk as a biomaterial10.1016/j.progpolymsci.2007.05.013 ↗
75. Study on the properties of the PVA/SF blend membranes
76. Improvement of histocompatibility of silk fibroin/polyurethane membrane with controlled release of aspirin10.1002/app.40580 ↗
77. Study on the blends of silk fibroin and sodium alginate: hydrogen bond formation, structure and properties10.1016/j.polymer.2019.01.004 ↗
78. Silk fibroin/sodium alginate composite porous materials with controllable degradation10.1016/j.ijbiomac.2019.10.141 ↗
79. Development of poly(vinyl alcohol)/starch/ethyl lauroyl arginate blend films with enhanced antimicrobial and physical properties for active packaging10.1016/j.ijbiomac.2021.09.208 ↗
80. Blend films from sodium alginate and gelatin solutions10.1081/MA-100103352 ↗
81. Viscoelastic silk fibroin hydrogels with tunable strength10.1021/acsbiomaterials.0c01348 ↗
82. Flexibility regeneration of silk fibroin in vitro10.1021/bm300541g ↗
83. Silk fibroin/sodium alginate composite nano-fibrous scaffold prepared through thermally induced phase-separation (TIPS) method for biomedical applications10.1016/j.msec.2015.05.052 ↗
84. Insight into the orientation behavior of thermal-aged and historic silk fabrics by polarized FTIR microspectroscopy10.1016/j.culher.2019.02.007 ↗
85. Effect of freeze‐drying on the properties of silk fibroin/polyvinyl alcohol/hydroxyapatite composites10.1002/pc.25158 ↗
86. Structure of silk studied with NMR10.1016/S0079-6565(01)00039-5 ↗