Influence of plate working length on fatigue life in load bearing osteosynthesis constructs: Experimental insights and validated finite element predictions
Source abstract
Abstract
Background Fatigue failure of osteosynthesis plates in load bearing constructs remains a significant clinical challenge, with plate working length (PWL) influencing stress distribution and implant life span. Despite conflicting evidence on PWL's impact, finite element (FE) models offer potential for predicting fatigue life, yet their application to PWL-specific fatigue in bone-plate constructs is limited. Methods This study investigated the effect of PWL on fatigue life in load bearing constructs using experimental cyclic testing and FE modeling. Synthetic bone models with a 10 mm osteotomy gap were stabilized with 3.5 mm stainless steel locking compression plates, testing short (1 empty hole), medium (3 empty holes), and long (5 empty holes) PWL configurations (N = 6 per group) under sinusoidal loading (260 N peak, 3 Hz). A second sub-study assessed the medium PWL across nine load levels (220-380 N). FE models, validated against experimental force-displacement curves, predicted cycles to failure using Basquin's stress-based criteria. Statistical analyses compared experimental and FE-predicted cycles. Results Shorter PWL significantly increased fatigue life (short: 1.19 × 106 ± 0.28 × 106 cycles; medium: 0.35 × 106 ± 0.07 × 106; long: 0.20 × 106 ± 0.04 × 106; p < 0.003). FE predictions closely matched experimental cycles for medium and long PWL (p > 0.05) but underpredicted for short PWL (p = 0.03), likely due to tied interface assumptions. Most short PWL constructs survived beyond 106 cycles, reaching up to 1.5 million cycles in the very high-cycle fatigue regime without failing, where Basquin's accuracy may decrease. Sub-study 2 showed a strong load-life correlation (R2 = 0.96), with FE predictions achieving high accuracy (CCC = 0.972, REE = 6.3 %). Conclusion Shorter PWL enhances fatigue life in load bearing constructs by reducing plate stress, challenging traditional beliefs favoring longer PWL. FE models effectively predict fatigue life for medium and long PWL, supporting preoperative optimization, but require refinement for short PWL, including frictional contact modeling and alternative fatigue models for very high-cycle fatigue. Validation in physiological conditions is needed to enhance clinical applicability.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tendon Structure and Treatment · Gear and Bearing Dynamics Analysis · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Basquin · 1910 · vol. 10 · 625
2. Effect of plate type and working length on a synthetic compressed Juxta-Articular fracture model10.1055/s-0040-1716722 ↗
3. Bone plates runout prediction through tensile strength and geometric properties for regulatory mechanical testing10.1007/s10439-023-03363-2 ↗
4. Effect of plate working length on plate stiffness and cyclic fatigue life in a cadaveric femoral fracture gap model stabilized with a 12-hole 2.4 mm locking compression plate10.1186/1746-6148-9-125 ↗
5. Implant materials
6. Effect of plate-bone distance and working length on 2.0-mm locking construct stiffness and plate strain in a diaphyseal fracture gap model: a biomechanical study
7. Severity of complications after locking plate osteosynthesis in distal femur fractures10.3390/jcm13051492 ↗
8. Choosing a proper working length can improve the lifespan of locked plates. A biomechanical study10.1016/j.clinbiomech.2010.11.020 ↗
9. Finite element analysis of fracture fixation10.1007/s11914-021-00690-y ↗
10. Comparison of plates versus intramedullary nails for fixation of displaced midshaft clavicular fractures
11. Pre-operative planning for fracture fixation using locking plates: device configuration and other considerations10.1016/S0020-1383(18)30296-1 ↗
12. Experimental and numerical investigation into the influence of loading conditions in biomechanical testing of locking plate fracture fixation devices10.1302/2046-3758.71.BJR-2017-0074.R2 ↗
13. On the importance of accurate elasto-plastic material properties in simulating plate osteosynthesis failure10.3389/fbioe.2023.1268787 ↗
14. Experimental analysis and numerical fatigue life prediction of 3D-Printed osteosynthesis plates10.3389/fbioe.2023.1133869 ↗
15. Biomechanical comparison of use of two screws versus three screws per fragment with locking plate constructs under cyclic loading in compression in a fracture gap model10.1055/s-0042-1744175 ↗
16. Die Lev/bensdauer von kugellagern
17. The effect of intramedullary pin size and plate working length on plate strain in locking compression plate-rod constructs under axial load10.3415/VCOT-16-01-0008 ↗
18. Physical and biological aspects of fracture healing with special reference to internal fixation
19. Biomechanical testing of the LCP--how can stability in locked internal fixators be controlled?10.1016/j.injury.2003.09.021 ↗
20. The determination of fatigue limits under alternating stress conditions
21. Pingouin: statistics in python10.21105/joss.01026 ↗
22. The mechanical properties and fatigue prediction of a new generation of osteosynthesis devices10.2478/scjme-2021-0021 ↗
23. SciPy 1.0: fundamental algorithms for scientific computing in Python10.1038/s41592-019-0686-2 ↗
24. The effect of working length, fracture, and screw configuration on plate strain in a 3.5-mm LCP bone model of comminuted fractures10.1055/s-0043-1774371 ↗
25. On fatigue failure prediction of prosthetic devices through XFEM analysis
26. Plating system design determines mechanical environment in long bone mid-shaft fractures: a finite element analysis10.1080/08941939.2019.1567875 ↗
27. StressLife: a short-time approach for the determination of a trend S-N curve in and beyond the HCF regime for the steels 20MnMoNi5-5 and SAE 104510.3390/ma16113914 ↗
28. Systematic review of the complications of plate fixation of clavicle fractures10.1007/s00402-011-1456-5 ↗