journal article·2013-04

Superelastic behavior of a β-type titanium alloy

D.C. Zhang, Y.F. Mao, M. Yan, J.J. Li, E.L. Su, Y.L. Li, S.W. Tan, J.G. Lin

Publisher page

Abstract

The superelasticity of a β Ti alloy, Ti-7.5Nb-4Mo-2Sn (in atom percent) was evaluated by using loading and unloading cyclic tensile tests under different thermomechanical conditions, and the effects of the plastic deformation, temperature, strain rate and cyclic loading on the superelasticity of the alloy were studied. It is found that, with the applied strain increasing, the stress inducing the reverse martensitic transformation σα″-β and the strain recovery rate η decreases. The increase of deformation temperature promotes σβ-α″, σα″-β and Δσ, and the temperature dependency of the stresses obeys the Clausius-Clapeyron relation. σβ-α″, σα″-β and Δσ are independent on the strain rate when it is lower than 8.35×10(-4)s(-1). However, when the strain rate is higher than 8.35×10(-4)s(-1), σβ-α″ and Δσ increase, but σα″-β decreased with increasing the strain rate. By cyclic loading and unloading to the maximum strain of 6% at 25°C under the strain rate of 1.67×10(-4)s(-1), the alloy exhibits a improved superelasticity after seventh cycles due to the training effect.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Shape memory properties of Ti–Nb–Mo biomedical alloys10.1016/j.actamat.2010.04.013 ↗
2. Nitinol—its use in vascular surgery and other applications10.1053/ejvs.2000.1111 ↗
3. Duerig · 1990
4. Stress-induced martensitic transformations and shape memory at nanometer scales10.1016/j.actamat.2006.01.030 ↗
5. Mechanical properties of a Ti–Nb–Al shape memory alloy10.2320/matertrans.45.1077 ↗
6. Effect of training conditions and extended thermal cycling on nitinol two-way shape memory behavior10.1088/0964-1726/4/4/010 ↗
7. Structure and properties of cast binary Ti–Mo alloys10.1016/S0142-9612(99)00114-3 ↗
8. Mechanical properties of Ti–Nb biomedical shape memory alloys containing Ge or Ga10.1016/j.msec.2005.01.025 ↗
9. Microstructure and elastic modulus of Ti–Nb–Si ternary alloys for biomedical applications10.1016/j.scriptamat.2005.11.001 ↗
10. Martensitic transformation and superelasticity of Ti–Nb–Pt alloys10.2320/matertrans.48.400 ↗
11. Mechanical properties and shape memory behavior of Ti–Nb alloys10.2320/matertrans.45.2443 ↗
12. Effect of Ta addition on shape memory behavior of Ti–22Nb alloy10.1016/j.msea.2005.10.065 ↗
13. Martensitic transformation, shape memory effect and superelasticity of Ti–Nb binary alloys10.1016/j.actamat.2006.01.019 ↗
14. Shape memory characteristics of Ti–22Nb–(2–8)Zr (at%) biomedical alloys10.1016/j.msea.2005.05.050 ↗
15. Effect of annealing temperature on microstructure and shape memory characteristics of Ti–22Nb–6Zr (at%) biomedical alloy10.2320/matertrans.47.505 ↗
16. Bone formation at the surface of low modulus Ti–7.5Mo implants in rabbit femur10.1016/j.biomaterials.2007.02.005 ↗
17. Superelastic cycling and room temperature recovery of Ti74Nb26 shape memory alloy10.1016/j.actamat.2009.12.009 ↗
18. Superelastic and cyclic response of NiTi SMA at various strain rates and temperatures10.1016/j.mechmat.2005.07.004 ↗
19. Superelastic effect in polycrystalline ferrous alloys10.1126/science.1202232 ↗
20. Otsuka · 1998
21. Characteristics of energy storage and dissipation in TiNi shape memory alloy10.1016/j.stam.2005.07.008 ↗
22. Shabalovskaya, S., In: Proceedings of the First International Conference on Shape Memory and Superelastic Technologies; 1994, 209.
23. A thermo-mechanical treatment to improve the superelastic performances of biomedical Ti–26Nb and Ti–20Nb–6Zr (at%) alloy10.1016/j.jmbbm.2011.06.003 ↗
24. Influence of a short thermal treatment on the superelastic properties of a titanium-based alloy10.1016/j.scriptamat.2010.07.042 ↗
25. Effect of nitrogen addition and annealing temperature on superelastic properties of Ti–Nb–Zr–Ta alloys10.1016/j.msea.2010.07.052 ↗
26. Cyclic deformation behavior of a Ti–26at% Nb alloy10.1016/j.actamat.2009.01.037 ↗
27. Lattice modulation and superelasticity in oxygen-added β-Ti alloys10.1016/j.actamat.2011.06.015 ↗
28. Shape memory effect and cyclic deformation behavior of Ti–Nb–N alloys10.1142/S1793604709000600 ↗
29. BID: a novel BH3 domain-only death agonist
30. Influence of cold deformation on martensite transformation and mechanical properties of Ti–Nb–Ta–Zr alloy10.1016/j.jallcom.2008.02.032 ↗
31. Effect of ternary alloying elements on microstructure and superelastictity of Ti–Nb alloys10.1016/j.msea.2012.09.012 ↗
32. Effect of Sn addition on the microstructure and superelasticity in Ti–Nb–Mo–Sn alloys10.1016/j.jmbbm.2012.04.017 ↗
33. Experimental study on rate dependence of macroscopic domain and stress hysteresis in NiTi shape memory alloy strips10.1016/j.ijmecsci.2010.08.007 ↗
34. Deformation-induced martensitic transformation and its reversibility in Ni–Ti–Nb alloys wide hysteresis shape memory alloys