An analysis of crack growth in dentin at the microstructural scale
Source abstract
Abstract
Dentin is a biocomposite possessing complex hierarchical structure, which endows this hard tissue with excellent damage tolerance. In this study, crack growth in dentin at the microstructural scale is investigated and the synergistic effects of plastic deformation of intertubular dentin (ITD), elasticity and fracture properties of peritubular dentin (PTD), and fracture properties of PTD/ITD interface on the fracture of dentin are explored. A micromechanical model is developed, which captures the experimentally observed fracture process of dentin, i.e. occurrence of microcracking of PTD ahead of the main crack. It is found through numerical simulations that high relative stiffness and low cohesive strength of PTD increase the propensity of microcracking of PTD, whereas reduce the plastic dissipation and toughness of the microstructure of dentin. The microcracking of PTD can be also promoted by low toughness of PTD. The large friction angle and weak strain hardening of ITD could promote the microcracking of PTD, and simultaneously enhance the toughness of the microstructure of dentin. In addition, it is identified that the cohesive strength of the PTD/ITD interface plays a crucial role in dominating fracture mechanisms; low cohesive strength leads to fracture of interface and suppresses microcracking of PTD, which provides an explanation for the crack deflection along interface observed in experiments. Nevertheless, the toughness of interface has a negligible influence on the fracture of dentin.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dental materials and restorations · Orthopaedic implants and arthroplasty · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Constitutive modeling the plastic deformation of bone-like materials10.1016/j.ijsolstr.2016.05.003 ↗
2. Crack initiation and propagation in composite microstructure of dentin10.1016/j.ijsolstr.2017.02.005 ↗
3. Role of microstructure on fracture of dentin10.1016/j.jmbbm.2016.03.008 ↗
4. Fracture analysis for biological materials with an expanded cohesive zone model10.1016/j.jbiomech.2014.04.054 ↗
5. Tubule orientation and the fatigue strength of human dentin10.1016/j.biomaterials.2005.10.005 ↗
6. Insights into the structure and composition of the peritubular dentin organic matrix and the lamina limitans10.1016/j.micron.2011.08.003 ↗
7. A mechanism for the control of crack propagation in all-brittle systems
8. Inelastic deformation and microcracking process in human dentin10.1016/j.jsb.2013.04.002 ↗
9. Compressive residual strains in mineral nanoparticles as a possible origin of enhanced crack resistance in human tooth dentin10.1021/acs.nanolett.5b00143 ↗
10. On the role of interface polymers for the mechanics of natural polymeric composites10.1039/b411986j ↗
11. Scanning electron microscopic investigation of human dentinal tubules10.1016/S0003-9969(76)80003-9 ↗
12. Ultimate tensile strength of tooth structures10.1016/S0109-5641(03)00110-6 ↗
13. Crack deflection at an interface between two orthotropic media10.1115/1.2899511 ↗
14. Stress–strain analysis for evaluating the effect of the orientation of dentin tubules on their mechanical properties and deformation behavior10.1016/j.jmbbm.2012.03.009 ↗
15. Crack deflection at an interface between dissimilar elastic materials10.1016/0020-7683(89)90021-8 ↗
16. The importance of microstructural variations on the fracture toughness of human dentin10.1016/j.biomaterials.2012.10.032 ↗
17. Effect of dentinal tubules and resin-based endodontic sealers on fracture properties of root dentin10.1016/j.dental.2009.06.006 ↗
18. Hardness and Young's modulus of human peritubular and intertubular dentin10.1016/0003-9969(95)00109-3 ↗
19. The mechanical properties of human dentin: a critical review and re-evaluation of the dental literature10.1177/154411130301400103 ↗
20. Resonant ultrasound spectroscopy measurements of the elastic constants of human dentin10.1016/j.jbiomech.2003.09.028 ↗
21. The effect of aging on crack-growth resistance and toughening mechanisms in human dentin10.1016/j.biomaterials.2007.12.008 ↗
22. Crack blunting, crack bridging and resistance-curve fracture mechanics in dentin: effect of hydration10.1016/S0142-9612(03)00458-7 ↗
23. Effect of aging on the microstructure, hardness and chemical composition of dentin10.1016/j.archoralbio.2015.10.002 ↗
24. Importance of tubule density to the fracture toughness of dentin10.1016/j.archoralbio.2016.03.003 ↗
25. Effect of orientation on the in vitro fracture toughness of dentin: the role of toughening mechanisms10.1016/S0142-9612(03)00278-3 ↗
26. On the fracture of human dentin: is it stress- or strain-controlled?10.1002/jbm.a.10079 ↗
27. The roles of toughness and cohesive strength on crack deflection at interfaces10.1016/j.jmps.2005.09.002 ↗
28. Dentin: a dynamic substrate - a review
29. Nanoscopic dynamic mechanical properties of intertubular and peritubular dentin10.1016/j.jmbbm.2011.08.010 ↗
30. Ultimate tensile strength of dentin: evidence for a damage mechanics approach to dentin failure10.1002/jbm.10230 ↗
31. Near tubule and intertubular bovine dentin mapped at the 250 nm level10.1016/j.jsb.2011.07.014 ↗
32. The relation between crack growth resistance and fracture process zone parameters in elastic-plastic solids10.1016/0022-5096(92)90020-3 ↗
33. Mesoscale porosity at the dentin-enamel junction could affect the biomechanical properties of teeth10.1016/j.actbio.2017.01.052 ↗
34. Anisotropic fracture in bovine root and coronal dentin10.1016/j.dental.2004.07.008 ↗
35. Effect of inhomogeneities on dynamic crack growth in an elastic solid10.1088/0965-0393/5/5/005 ↗
36. Anisotropy of the mechanical properties of human dentin under shear testing10.1016/j.matlet.2014.09.140 ↗
37. Young's modulus of peritubular and intertubular human dentin by nano-indentation tests10.1016/j.jsb.2010.09.010 ↗