journal article·2014-02

Recrystallization improves the mechanical properties of sintered electrospun polycaprolactone

M. Tyler Nelson, Lagnajit Pattanaik, Marcia Allen, Matthew Gerbich, Kelvin Hux, Matthew Allen, John J. Lannutti

Publisher page

Abstract

Background Resorbable electrospun polycaprolactone (PCL) scaffolds for tissue reconstruction can provide physicians with an "off the shelf" product tailored to the patient's specific tissue architecture. However, many tissue-engineering platforms do not possess the necessary long-term mechanical stability needed to properly support tissue development. Objective Sintering has been explored as a means of altering the properties of electrospun PCL. However, crystallinity-driven changes in mechanical properties following thermal treatment have not been previously investigated. Methods PCL nanofibers were produced by electrospinning and subsequently thermally sintered (at 55, 56 and 58°C) to enhance their long-term mechanical integrity in response to representative biological milieux. Results Scaffolds initially sintered at 56°C displayed 6-fold increases in compressive strength and 3-fold increases in modulus, while displaying 10-fold increases in energy dissipation with increasing sintering temperature. Sintering just below the Tm resulted in amorphization of the 55°C sample as indicated by the 20-fold lower XRD peak intensities. Although crystallinity is suppressed, the polymer chains likely retain chain alignment from electrospinning and are apparently highly susceptible to recrystallization. After only 1d PBS exposure, the 55°C samples recover a substantial fraction of the as-spun crystallinity; 7d of exposure fully restores as-spun peak intensities. The mechanical properties of all three (55, 56, or 58°C) scaffolds displayed peak values of compressive strength and modulus following 7d exposure. Conclusion In contrast with the current state-of-the-art which assumes that tissue engineering scaffolds only grow weaker following exposure, in these scaffolds maximum values of compressive strength and modulus were observed after 7d of aqueous immersion. This suggests that polymeric recrystallization can be used to increase or optimize mechanical properties in vitro/in vivo. Scaffolds that increase their mechanical integrity during biological exposures constitute a new pathway enabling clinical advances.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · biodegradable polymer synthesis and properties · Tissue Engineering and Regenerative Medicine

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Alexander · Classes Mater. Used Med. · 1996
2. Baiguera · Trachea · 2011
3. Tissue engineered human tracheas for in vivo implantation
4. Tissue-engineered tracheal transplantation
5. Baiguera · Detergent-Enzym. Method. Bioeng. Hum. Airways · 2011
6. Long-term changes to in vitro preserved bioengineered human trachea and their implications for decellularized tissues10.1016/j.biomaterials.2012.01.064 ↗
7. In vitro and in vivo degradation of non-woven materials made of poly(epsilon-caprolactone) nanofibers prepared by electrospinning under different conditions
8. Engineering biomaterials to integrate and heal: the biocompatibility paradigm shifts10.1002/bit.24559 ↗
9. In vitro and in vivo analysis of co-electrospun scaffolds made of medical grade poly(epsilon-caprolactone) and porcine collagen
10. Cooke · Prop. Mater · 1996
11. Design and analysis of tissue engineering scaffolds that mimic soft tissue mechanical anisotropy10.1016/j.biomaterials.2006.02.024 ↗
12. Coury · Degrad. Mater. Biol. Environ · 1996
13. Learning curve in tracheal allotransplantation
14. Fabrication of burst pressure competent vascular grafts via electrospinning: effects of microstructure10.1002/jbm.a.31926 ↗
15. Fountain · 2012 · A12
16. Enzymatic degradation of poly(epsilon-caprolactone)/poly(DL-lactide) blends in phosphate buffer solution
17. Source-to-ground distance and the mechanical properties of electrospun fiber10.1016/j.actbio.2009.01.021 ↗
18. Viability and proliferation of rat MSCs on adhesion protein-modified PET and PU scaffolds10.1016/j.biomaterials.2012.07.060 ↗
19. Electrospun scaffold topography affects endothelial cell proliferation, metabolic activity, and morphology
20. Johnson · Microstructure-property relationships in a tissue-engineering scaffold. J. Appl. Polym. Sci. · 2007 · 104 · 2919
21. Electrospun PCL in vitro: a microstructural basis for mechanical property changes10.1163/156856209X416485 ↗
22. Tracheobronchial transplantation with a stem-cell-seeded bioartificial nanocomposite: a proof-of-concept study
23. Tissue-engineered airway: a regenerative solution
24. Mechanical properties and in vitro behavior of nanofiber–hydrogel composites for tissue engineering applications10.1088/0957-4484/23/9/095705 ↗
25. Tissue-engineered allograft tracheal cartilage using fibrin/hyaluronan composite gel and its in vivo implantation10.1002/lary.20652 ↗
26. A tissue-engineered trachea derived from a framed collagen scaffold, gingival fibroblasts and adipose-derived stem cells10.1016/j.biomaterials.2010.02.027 ↗
27. An animal model study for tissue-engineered trachea fabricated from a biodegradable scaffold using chondrocytes to augment repair of tracheal stenosis
28. Study of mechanical properties of engineered cartilage in an in vivo culture for design of a biodegradable scaffold
29. The use of thermal treatments to enhance the mechanical properties of electrospun poly (epsilon-caprolactone) scaffolds
30. Novel strategy to engineer trachea cartilage graft with marrow mesenchymal stem cell macroaggregate and hydrolyzable scaffold
31. Grafting of gelatin on electrospun poly(caprolactone) nanofibers to improve endothelial cell spreading and proliferation and to control cell orientation10.1089/ten.2005.11.1149 ↗
32. Improved cellular infiltration in electrospun fiber via engineered porosity10.1089/ten.2006.0306 ↗
33. Modulation of embryonic mesenchymal progenitor cell differentiation via control over pure mechanical modulus in electrospun nanofibers
34. Degradation and healing characteristics of small-diameter poly(epsilon-caprolactone) vascular grafts in the rat systemic arterial circulation10.1161/CIRCULATIONAHA.108.795732 ↗
35. On the biomechanical function of scaffolds for engineering load-bearing soft tissues10.1016/j.actbio.2010.01.001 ↗
36. Replacement of a tracheal defect with autogenous mucosa lined tracheal prosthesis made from polypropylene mesh10.1097/00002480-200109000-00020 ↗
37. Regeneration of tracheal epithelium utilizing a novel bipotential collagen scaffold
38. Collagen vitrigel scaffold for regenerative medicine of the trachea: experimental study and quantitative evaluation
39. Fabrication of modified and functionalized polycaprolactone nanofibre scaffolds for vascular tissue engineering10.1088/0957-4484/16/10/028 ↗