Mechanical behavior of surgical meshes for abdominal wall repair: In vivo versus biaxial characterization
Source abstract
Abstract
Despite the widespread use of synthetic meshes in the surgical treatment of the hernia pathology, the election criteria of a suitable mesh for specific patient continues to be uncertain. Thus, in this work, we propose a methodology to determine in advance potential disadvantages on the use of certain meshes based on the patient-specific abdominal geometry and the mechanical features of the certain meshes. To that purpose, we have first characterized the mechanical behavior of four synthetic meshes through biaxial tests. Secondly, two of these meshes were implanted in several New Zealand rabbits with a total defect previously created on the center of the abdominal wall. After the surgical procedure, specimen were subjected to in vivo pneumoperitoneum tests to determine the immediate post-surgical response of those meshes after implanted in a healthy specimen. Experimental performance was recorded by a stereo rig with the aim of obtaining quantitative information about the pressure-displacement relation of the abdominal wall. Finally, following the procedure presented in prior works (Simón-Allué et al., 2015, 2017), a finite element model was reconstructed from the experimental measurements and tests were computationally reproduced for the healthy and herniated cases. Simulations were compared and validated with the in vivo behavior and results were given along the abdominal wall in terms of displacements, stresses and strain. Mechanical characterization of the meshes revealed SurgiproTM as the most rigid implant and Neomesh SuperSoft® as the softer, while other two meshes (Neomesh Soft®, Neopore®) remained in between. These two meshes were employed in the experimental study and resulted in similar effect in the abdominal wall cavity and both were close to the healthy case. Simulations confirmed this result while showed potential objections in the case of the other two meshes, due to high values in stresses or elongation that may led to discomfort in real tissue. The use of this methodology on human surgery may provide the surgeons with reliable and useful information to avoid certain meshes on specific-patient treatment.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hernia repair and management · Pelvic and Acetabular Injuries · Abdominal Surgery and Complications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. The lichtenstein open tension-free mesh repair of inguinal hernias10.1007/BF00311436 ↗
2. Roturas de malla: una causa poco frecuente de recidiva herniaria10.1016/j.rehah.2015.02.006 ↗
3. Which mesh for hernia repair?10.1308/003588410X12664192076296 ↗
4. Conze, J., Klinge, U., 1999. Biocompatibility of biomaterials-clinical and mechanical aspects. In: Schumpelick, V., Kingsnorth, A.N., editors, Incisional Hernia, chapter 14, pp. 169–177. Springer Berlin Heidelberg, Berlin, Heidelberg.10.1007/978-3-642-60123-1_14 ↗
5. Cordero, A., Hernández-Gascón, B., Pascual, G., Bellón, J.M., Calvo, B., Peña, E., 2015. Biaxial Mechanical Evaluation of Absorbable and Nonabsorbable Synthetic Surgical Meshes Used for Hernia Repair: Physiological Loads Modify Anisotropy Response. Annals of Biomedical Engineering.10.1007/s10439-015-1503-4 ↗
6. Mesh expansion as the cause of bulging after abdominal wall hernia repair10.1016/j.ijscr.2016.09.051 ↗
7. Hyperelastic modelling of arterial layers with distributed collagen fibre orientations10.1098/rsif.2005.0073 ↗
8. Gefen · 2012
9. Solution of the nonlinear elasticity imaging inverse problem: the incompressible case10.1016/j.cma.2010.12.018 ↗
10. Mechanical and histological characterization of the abdominal muscle. a previous step to modelling hernia surgery10.1016/j.jmbbm.2010.11.012 ↗
11. Mechanical behaviour of synthetic surgical meshes: finite element simulation of the herniated abdominal wall10.1016/j.actbio.2011.06.033 ↗
12. Holzapfel · 2000
13. Inverse finite element characterization of soft tissues10.1016/S1361-8415(02)00085-3 ↗
14. The lightweight and large porous mesh concept for hernia repair10.1586/17434440.2.1.103 ↗
15. Current options in inguinal hernia repair in adult patients
16. Lightweight versus heavyweight in inguinal hernia repair: a meta-analysis10.1007/s10029-012-0928-z ↗
17. The tension-free hernioplasty
18. Mechanical failure of a lightweight polypropylene mesh10.1007/s10029-012-0959-5 ↗
19. An algorithm for least-squares estimation of nonlinear parameters10.1137/0111030 ↗
20. Linear and nonlinear elasticity imaging of soft tissue in vivo: demonstration of feasibility10.1088/0031-9155/54/5/006 ↗
21. Long-term pain and recurrence after repair of ventral incisional hernias by open mesh: clinical and MRI study10.1007/s00423-003-0440-0 ↗
22. PhotoModeler 2013. PhotoModeler Scanner. Eos Systems Inc., Vancouver, Canada.
23. A non-biological model system to simulate the in vivo mechanical behavior of prosthetic meshes10.1016/j.jmbbm.2013.01.029 ↗
24. Demographic and socioeconomic aspects of hernia repair in the united states in 200310.1016/S0039-6109(03)00132-4 ↗
25. Biaxial mechanical evaluation of planar biological materials10.1023/A:1010917028671 ↗
26. Open tension free repair of inguinal hernias; the Lichtenstein technique
27. Bulging of the mesh after laparoscopic repair of ventral and incisional hernias10.4293/108680810X12924466008240 ↗
28. Towards the mechanical characterization of abdominal wall by inverse analysis10.1016/j.jmbbm.2016.11.007 ↗
29. Developing a new methodology to characterize in vivo the passive mechanical behavior of abdominal wall on an animal model10.1016/j.jmbbm.2015.06.029 ↗
30. Steel · 1960
31. Mechanical characterization of skin – finite deformations10.1016/0021-9290(70)90055-2 ↗