journal article·2017-01

Do biodegradable magnesium alloy intramedullary interlocking nails prematurely lose fixation stability in the treatment of tibial fracture? A numerical simulation

Haosen Wang, Zhixiu Hao, Shizhu Wen

Publisher page

Abstract

Intramedullary interlocking nailing is an effective technique used to treat long bone fractures. Recently, biodegradable metals have drawn increased attention as an intramedullary interlocking nailing material. In this study, numerical simulations were implemented to determine whether the degradation rate of magnesium alloy makes it a suitable material for manufacturing biodegradable intramedullary interlocking nails. Mechano-regulatory and bone-remodeling models were used to simulate the fracture healing process, and a surface corrosion model was used to simulate intramedullary rod degradation. The results showed that magnesium alloy intramedullary rods exhibited a satisfactory degradation rate; the fracture healed and callus enhancement was observed before complete dissolution of the intramedullary rod. Delayed magnesium degradation (using surface coating techniques) did not confer a significant advantage over the non-delayed degradation process; immediate degradation also achieved satisfactory healing outcomes. However, delayed degradation had no negative effect on callus enhancement, as it did not cause signs of stress shielding. To avoid risks of individual differences such as delayed union, delayed degradation is recommended. Although the magnesium intramedullary rod did not demonstrate rapid degradation, its ability to provide high fixation stiffness to achieve earlier load bearing was inferior to that of the conventional titanium alloy and stainless steel rods. Therefore, light physiological loads should be ensured during the early stages of healing to achieve bony healing; otherwise, with increased loading and degraded intramedullary rods, the fracture may ultimately fail to heal.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Orthopaedic implants and arthroplasty · Bone fractures and treatments

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Fabrication and corrosion behavior of Si/HA nano-composite coatings on biodegradable Mg–Zn–Mn–Ca alloy10.1016/j.surfcoat.2014.07.025 ↗
2. Is routine removal of intramedullary nails justified?
3. Simulation of fracture healing in the tibia: mechanoregulation of cell activity using a lattice modeling approach10.1002/jor.21362 ↗
4. Fatigue life of compact bone-I effects of stress amplitude, temperature and density10.1016/0021-9290(76)90136-6 ↗
5. Fatigue life of compact bone-II effects of microstructure and density10.1016/0021-9290(76)90006-3 ↗
6. In vitro and in vivo corrosion measurements of Mg-6Zn alloys in the bile10.1016/j.msec.2014.05.014 ↗
7. A review of biomechanical studies of intramedullary nails10.1016/1350-4533(95)97311-C ↗
8. Numerical analysis of a diffusive strain-adaptive bone remodelling theory10.1016/j.ijsolstr.2012.04.009 ↗
9. Continuum damage model for bioresorbable magnesium alloy devices-Application to coronary stents10.1016/j.jmbbm.2010.11.003 ↗
10. A corrosion model for bioabsorbable metallic stents10.1016/j.actbio.2011.05.032 ↗
11. In vivo study of degradable magnesium and magnesium alloy as bone implant10.1007/s11706-007-0074-1 ↗
12. A simple tip for removal of a ׳stubborn׳ tibial nail10.1016/j.injury.2013.11.029 ↗
13. A mechano-regulatory bone-healing model incorporating cell-phenotype specific activity10.1016/j.jtbi.2008.01.030 ↗
14. Corrosion behavior, biocompatibility and biomechanical stability of a prototype magnesium-based biodegradable intramedullary nailing system10.1016/j.msec.2015.10.006 ↗
15. 16. Three-dimensional simulation of fracture repair in the human tibia10.1080/1025584021000025014 ↗
16. Measurement of fracture callus material properties via nanindentation10.1016/j.actbio.2008.02.030 ↗
17. Bone ingrowth into a porous coated implant predicted by a mechano-regulatory tissue differentiation algorithm10.1007/s10237-007-0100-3 ↗
18. Bone remodelling algorithms incorporating both strain and microdamage stimuli10.1016/j.jbiomech.2006.05.007 ↗
19. Strategies to improve the corrosion resistance of microarc oxidation (MAO) coated magnesium alloys for degradable implants: prospects and challenges10.1016/j.pmatsci.2013.08.002 ↗
20. Monomelic amyotrophy following trauma and immobilization in children10.1002/(SICI)1097-4598(199704)20:4<425::AID-MUS4>3.0.CO;2-C ↗
21. In vitro and in vivo corrosion of the novel magnesium alloy Mg–La–Nd–Zr: influence of the measurement technique and in vivo implant location10.1088/1748-6041/10/4/045021 ↗
22. Measuring stiffness can define healing of tibial fractures10.1302/0301-620X.76B3.8175839 ↗
23. In vivo evaluation of a magnesium-based degradable intramedullary nailing system in a sheep model10.1016/j.actbio.2015.07.025 ↗
24. Computational bone remodelling simulations and comparisons with DEXA results10.1016/j.orthres.2005.02.002 ↗
25. Internal loads in the human tibia during gait10.1016/j.clinbiomech.2008.12.007 ↗
26. Biodegradable magnesium-based screw clinically equivalent to titanium screw in hallux valgus surgery-short term results of the first prospective, randomized, controlled clinical pilot study10.1186/1475-925X-12-62 ↗
27. The history of biodegradable magnesium implants: a review10.1016/j.actbio.2010.02.028 ↗
28. In vivo corrosion of four magnesium alloys and the associated bone response10.1016/j.biomaterials.2004.09.049 ↗
29. In vivo corrosion and corrosion protection of magnesium alloy LAE44210.1016/j.actbio.2009.10.012 ↗
30. A biodegradable polymer-based coating to control the performance of magnesium alloy orthopaedic implants10.1016/j.biomaterials.2009.11.111 ↗
31. The effect of dynamization on slowing the healing of femur shaft fractures after interlocking nailing10.1097/00005373-199708000-00010 ↗
32. Sonographically assisted percutaneous removal of screws in dynamization of the interlocking intramedullary nail10.7863/jum.2013.32.2.319 ↗
33. Research on an Mg–Zn alloy as a degradable biomaterial10.1016/j.actbio.2009.06.028 ↗
34. Biodegradable metals10.1016/j.mser.2014.01.001 ↗
35. Docetaxel (DTX)-loaded polydopamine-modified TPGS-PLA nanoparticles as a targeted drug delivery system for the treatment of liver cancer10.1016/j.actbio.2015.11.031 ↗