journal article·2018-03

Effect of ice-quenching after oxidation treatment on hardening of a Pd-Cu-Ga-Zn alloy for bonding porcelain

Min-Jung Kim, Hye-Jeong Shin, Hyung-Il Kim, Yong Hoon Kwon, Hyo-Joung Seol

Publisher page

Abstract

This study examined the effect of ice-quenching after oxidation treatment on hardness change of a Pd-Cu-Ga-Zn metal-ceramic alloy during porcelain firing simulation. Although not statistically significant, the alloy was softened slightly during porcelain firing simulation with conventional slow cooling rate. On the other hand, the hardness increased significantly by ice-quenching instead of the slow cooling after oxidation (p<0.001). The gap in the final hardness depending on ice-quenching occurred in the matrix and plate-like precipitates but not in the particle-like structure without plate-like precipitates (p<0.05). The mechanism of ice-quenching after oxidation to prevent softening and induce hardening during porcelain firing simulation involved the more active precipitation and retardation of microstructural coarsening. In conclusion, for practical work on Pd-Cu-Ga-Zn alloys, the oxidation treatment followed by ice-quenching instead of slow cooling is recommended for the simultaneous oxidation and hardening effects on the alloy.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Cullity · 1978 · 506
2. Improving the processing of high-gold metal-ceramic frameworks by a pre-firing heat treatment10.1016/S0109-5641(99)00086-X ↗
3. Transmission electron microscopic investigation of a Pd-Ag-In-Sn dental alloy10.1016/S0142-9612(02)00564-1 ↗
4. Annealing study of palladium-silver dental alloys: vickers hardness measurements and SEM microstructural observations10.1007/s10856-006-0668-7 ↗
5. Age-hardening behavior in a palladium-base dental porcelain-fused alloy10.1016/1044-5803(90)90008-8 ↗
6. Ageing reactions in a high carat gold alloy for dental porcelain bonding10.1023/A:1018556110936 ↗
7. Hardening effect of pre-and post-firing heat treatment for a firing simulated Au-Pd-In metal-ceramic alloy10.1007/s13404-014-0149-6 ↗
8. Change in hardness of an as-cast and softening heat-treated low-gold-content alloy for bonding porcelain by simulated porcelain firing and its mechanism10.1007/s13404-015-0158-0 ↗
9. Mechanism of unique hardening of dental Ag-Pd-Au-Cu alloys in relation with constitutional phases10.1016/j.jallcom.2011.10.099 ↗
10. Study of Pd-Ag dental alloys: examination of effect of casting porosity on fatigue behaviour and microstructural analysis10.1007/s10856-010-4116-3 ↗
11. Strengthening of a Pd-free high gold dental alloy for porcelain bonding by a pre-firing heat treatment10.1016/j.dental.2006.06.048 ↗
12. Massalski · 1990 · 1454
13. O'Brien · 2002 · 358
14. Age-hardening behavior of a low-gold dental alloy10.1007/s10856-006-0677-6 ↗
15. Porter · 2009
16. Metal-ceramic alloys in dentistry: a review10.1111/j.1532-849X.2008.00377.x ↗
17. Rosenstiel · 2016 · 538
18. Effect of ice-quenching on the change in hardness of a Pd-Au-Zn alloy during porcelain firing simulation10.4012/dmj.2016-279 ↗
19. Isothermal age-hardening behavior in commercial dental gold alloys containing palladium10.4012/dmj.3.253 ↗
20. Metallurgical structure and microhardness of four new palladium-based alloys10.1111/j.1532-849X.1996.tb00513.x ↗
21. Villars · 1985 · 3027
22. Hardening by cooling rate control and post-firing heat treatment in Pd-Ag-Sn alloy for bonding porcelain10.4012/dmj.2015-189 ↗