journal article·2020-04

Residual polymerization stresses in human premolars generated with Class II composite restorations

Kaoru Ohmori, Tatsuya Tasaki, Saori Kimura, Ayaka Hori, Nana Sakaeda, Masao Hanabusa, Takatsugu Yamamoto

Publisher page

Abstract

The objective of this study was to assess the influence of filling techniques on residual polymerization stresses in resin composite restorations of the tooth. Flat planes were ground in buccal enamel surfaces of extracted human premolars, followed by preparing Class II cavities. Indentation cracks were introduced in the planes and crack lengths were measured mesio-distally (x-direction) and cervico-incisally (y-direction). Cavities were filled with a resin composite and an adhesive using three methods; one with bulk filling and two with differing incremental filling techniques. The x- and y-tensile stresses were calculated from crack lengths measured repeatedly over 360 min after filling. Elastic modulus and polymerization shrinkage of the composite were also measured. Filling technique and time after fillings were statistically significant only for the y-stress. The incremental techniques generated smaller stresses than the bulk filling. The stresses developed for 60 min after filling, while the modulus and the shrinkage stopped developing within 10 min and 2 min after irradiation, respectively. The incremental technique, in which the proximal portion of the cavity was filled first, was effective in decreasing the residual tensile stress generated by the polymerization of resin composite.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dental materials and restorations · Dental Trauma and Treatments · Dental Research and COVID-19

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Stress distribution of bulk-fill resin composite in class II restorations
2. Crack arrest within teeth at the dentinoenamel junction caused by elastic modulus mismatch10.1016/j.biomaterials.2010.01.127 ↗
3. Effect of temperature and humidity on post-gel shrinkage, cusp deformation, bond strength and shrinkage stress – construction of a chamber to simulate the oral environment10.1016/j.dental.2015.09.023 ↗
4. Testing of dental materials and biomechanics
5. Slumping during sculpturing of composite materials10.1016/j.dental.2008.08.008 ↗
6. The effect of adhesive thickness on polymerization contraction stress of composite10.1177/00220345000790030501 ↗
7. Shrinkage behaviors of dental composite restorations - the experimental-numerical hybrid analysis10.1016/j.dental.2016.09.022 ↗
8. Polymerization shrinkage stresses in different restorative techniques for non-carious cervical lesions10.1016/j.jdent.2018.06.010 ↗
9. Nanoindentation of dental composites10.1002/jbm.b.30442 ↗
10. Cuspal deflection in premolar teeth restored with bulk-fill resin-based composite materials10.2341/16-072-L ↗
11. Setting stress in composite resin in relation to configuration of the restoration10.1177/00220345870660110601 ↗
12. Placing dental composites – a stressful experience10.2341/07-BL2 ↗
13. Polymerization stress – is it clinically meaningful?10.1016/j.dental.2015.06.020 ↗
14. Academy of dental materials guidance – resin composites: Part II – technique sensitivity (handling, polymerization, dimensional changes)10.1016/j.dental.2017.08.188 ↗
15. Academy of Dental Materials guidance–Resin composites: Part II–Technique sensitivity (handling, polymerization, dimensional changes)10.1016/j.dental.2017.08.188 ↗
16. Interference of functional monomers with polymerization efficiency of adhesives10.1111/eos.12245 ↗
17. Effect of irradiation source on the dentin bond strength of a one-bottle universal adhesive containing an amide monomer10.1080/01694243.2019.1639588 ↗
18. Fracture toughness of human enamel10.1177/00220345810600040901 ↗
19. Direct posterior esthetic restorations
20. Cuspal deflection in premolar teeth restored using current composite resins with and without resin-modified glass ionomer liner10.2341/11-400-L ↗
21. Comparison of premolar cuspal deflection in bulk or in incremental composite restoration methods10.2341/10-315-L ↗
22. Contraction stresses in surrounding tooth immediately after adhesive restorations
23. Reduction of polymerization contraction stress for dental composites by two-step light-activation10.1016/S0109-5641(01)00066-5 ↗
24. Enamel thickness of human maxillary molars reconsidered10.1002/ajpa.1330920208 ↗
25. Residual stress effects in sharp contact cracking. Part 1: indentation fracture mechanics10.1007/BF00551043 ↗
26. Shrinkage stress compensation in composite-restored teeth: relaxation or hygroscopic expansion?10.1016/j.dental.2013.03.006 ↗
27. Evaluation of the amount of residual monomer on UDMA-Based resins by FTIR10.4012/dmj.18.176 ↗
28. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
29. How should composite be layered to reduce shrinkage stress: incremental or bulk filling?10.1016/j.dental.2008.03.013 ↗
30. Do self-etch adhesives buffer polymerization stresses of resin composites?
31. A biomechanical model for a new incremental technique for tooth restoration
32. Volumetric shrinkage of composites using video-imaging10.1016/S0300-5712(03)00005-8 ↗
33. In vitro enamel thickness measurements with ultrasound10.1016/j.ultrasmedbio.2014.08.005 ↗
34. Polymerization shrinkage stresses in a premolar restored with different composite resins and different incremental techniques
35. Polymerization shrinkage stress of composite resins and resin cements – what do we need to know?10.1590/1807-3107bor-2017.vol31.0062 ↗
36. 2001
37. Simple optical method for measureing free shrinkage10.1016/j.dental.2015.08.150 ↗
38. Post-irradiation polymerization of composites containing bis-GMA and TEGDMA10.1016/S0109-5641(99)00040-8 ↗
39. Effects of temperature on composite resin shrinkage
40. Indentation damage and mechanical properties of human enamel and dentin10.1177/00220345980770030601 ↗
41. Calculation of contraction stresses in dental composites by analysis of crack propagation in the matrix surrounding a cavity10.1016/j.dental.2008.10.008 ↗
42. Polymerization stress of dental resin composite continues to develop 12 hours after irradiation10.1111/jerd.12091 ↗
43. Changes in polymerization stress and elastic modulus of bulk-fill resin composites for 24 hours after irradiation10.4012/dmj.2017-047 ↗