journal article·2021-02

Atomic layer deposition SiO2 films over dental ZrO2 towards strong adhesive to resin

Yuxin Yan, Yu Ji, Jia Yan, Xiaokun Hu, Qinghong Zhang, Mei Liu, Feimin Zhang

Publisher page

Abstract

Atomic layer deposition (ALD) is a self-limiting nanoscale film deposition technology with the advantages of good stability, consistency and conformability. In this study, we proposed to deposit silica (SiO2) films over dental zirconium-oxide (ZrO2) by ALD for better SiO2 films and higher bond strength between ZrO2 and resin. To investigate the superiority of film deposited by ALD, other surface modification methods such as sol-gel, vapor phase hydrolysis and electrostatic self-assembly were compared in terms of the short-term and long-term bond strength between ZrO2 and resin, measured by universal testing machine. Meanwhile, the surface morphology and chemical elemental analysis were characterized by scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) and Fourier transform infrared spectroscopy (FTIR). Results showed that the SiO2 films deposited by ALD or electrostatic self-assembly were uniform and consistent while sol-gel and vapor phase hydrolysis formed SiO2 films with cracks or pores, changing the morphology of ZrO2. ALD had the best results among all methods and increased the bond strength to 16.49 ± 1.60 MPa and 13.44 ± 1.63 MPa before and after aging respectively, which is expected to improve the long-term success rate of clinical dental ZrO2 prostheses.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic and Structural Properties of Oxides · Semiconductor materials and devices · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Antireflective mesoporous silica coatings by optimization of water content in acid-catalyzed sol-gel method for application in glass covers of concentrated photovoltaic modules10.1016/j.jcis.2018.09.043 ↗
2. Effects of hot chemical etching and 10-metacryloxydecyl dihydrogen phosphate (MDP) monomer on the bond strength of zirconia ceramics to resin-based cements10.1111/jopr.12435 ↗
3. Microtensile bond strength of a resin cement to glass infiltrated zirconia-reinforced ceramic: the effect of surface conditioning10.1016/j.dental.2005.04.021 ↗
4. Can the application of multi-mode adhesive be a substitute to silicatized/silanized Y-TZP ceramics?10.1590/0103-6440201801862 ↗
5. Nanoengineering and interfacial engineering of photovoltaics by atomic layer deposition10.1039/c1nr10349k ↗
6. Advances in top–down and bottom–up surface nanofabrication: techniques, applications & future prospects10.1016/j.cis.2011.11.001 ↗
7. Effect of surface pre-treatments on the zirconia ceramic–resin cement microtensile bond strength10.1016/j.dental.2011.07.002 ↗
8. Surface passivation of a photonic crystal band-edge laser by atomic layer deposition of SiO2 and its application for biosensing10.1039/C4NR07552H ↗
9. Constructing three-dimensional honeycombed graphene/silicon skeletons for high-performance Li-ion batteries10.1021/acsami.7b09169 ↗
10. Effect of an experimental zirconia–silica coating technique on micro tensile bond strength of zirconia in different priming conditions10.1016/j.dental.2012.04.020 ↗
11. A systematic review of the survival and complication rates of all-ceramic resin-bonded fixed dental prostheses10.1111/jopr.12678 ↗
12. Effects of silica-coating and a zirconate coupling agent on shear bond strength of flowable resin–zirconia bonding10.1016/j.ijadhadh.2013.12.025 ↗
13. Emerging applications for high K materials in VLSI technology10.3390/ma7042913 ↗
14. Mechanical reinforcement of nanoparticle thin films using atomic layer deposition10.1021/nn201167j ↗
15. Influence of surface treatments and resin cement selection on bonding to densely-sintered zirconium-oxide ceramic10.1016/j.dental.2008.05.012 ↗
16. Extracellular silica nanocoat formed by layer-by-layer (LBL) self-assembly confers aluminum resistance in root border cells of pea (Pisum sativum)10.1186/s12951-019-0486-y ↗
17. Evaluation of the microshear bond strength of MDP-containing and non–MDP-containing self-adhesive resin cement on zirconia restoration10.2341/18-132-L ↗
18. Effect of methacryloyloxydecyl dihydrogen phosphate-containing silane and adhesive used alone or in combination on the bond strength and chemical interaction with zirconia ceramics under thermal aging10.2341/18-093-L ↗
19. Effect of surface modifications on the bond strength of zirconia ceramic with resin cement resin10.1016/j.dental.2016.02.001 ↗
20. Comparison of two test designs for evaluating the shear bond strength of resin composite cements10.1016/j.dental.2015.11.023 ↗
21. Silica coating of nonsilicate nanoparticles for resin-based composite materials10.1177/0022034516662022 ↗
22. Formation and prevention of fractures in sol–gel-derived thin films10.1039/C4SM02085E ↗
23. Encapsulation of diclofenac sodium within polymer beads by silica species via vapour-phase synthesis10.1016/j.colsurfb.2016.02.041 ↗
24. Influence of non-thermal atmospheric pressure plasma treatment on shear bond strength between Y-TZP and self-adhesive resin cement10.3390/ma12203321 ↗
25. Effect of primer treatment on bonding of resin cements to zirconia ceramic10.1016/j.dental.2009.11.159 ↗
26. Bonding of resin composite luting cements to zirconium oxide by two air-particle abrasion methods10.2341/05-22 ↗
27. Self-assembly of Silicon@Oxidized mesocarbon microbeads encapsulated in carbon as anode material for lithium-ion batteries10.1021/acsami.7b16760 ↗
28. Bonding polycrystalline zirconia with 10-MDP–containing adhesives10.2341/16-156-L ↗
29. The effect of silica-coating by sol-gel process on resin-zirconia bonding10.4012/dmj.2012-100 ↗
30. Sensitive fluorescence detection of heparin based on self-assembly of mesoporous silica nanoparticle–gold nanoclusters with emission enhancement characteristics10.1039/C8AN01556B ↗
31. Atomic layer deposition of nanostructured materials for energy and environmental applications10.1002/adma.201104129 ↗
32. Enhanced resin-composite bonding to zirconia framework after pretreatment with selected silane monomers10.1016/j.dental.2010.11.002 ↗
33. Emerging applications of atomic layer deposition for lithium-ion battery studies10.1002/adma.201200397 ↗
34. Comparative study of titanium dioxide atomic layer deposition on silicon dioxide and hydrogen-terminated silicon10.1021/jp1013303 ↗
35. Effects of a convenient silica-coating treatment on shear bond strengths of porcelain veneers on zirconia-based ceramics10.4012/dmj.2012-037 ↗
36. Optimal sandblasting conditions for conventional-type yttria-stabilized tetragonal zirconia polycrystals10.1016/j.dental.2018.11.009 ↗
37. Methacrylate bonding to zirconia by in situ silica nanoparticle surface deposition10.1016/j.dental.2014.11.011 ↗
38. Development of a novel surface modification for improved bonding to zirconia10.1016/j.dental.2011.01.005 ↗
39. Background and survey of bioreplication techniques10.1088/1748-3182/6/3/031001 ↗
40. Analysis of ALD-processed thin films by ion-beam techniques10.1007/s00216-005-3365-3 ↗
41. Catalytically active silicon oxide nanoclusters stabilized in a metal–organic framework10.1002/chem.201701902 ↗
42. Adhesion to zirconia: a systematic review of current conditioning methods and bonding materials10.3390/dj7030074 ↗
43. Formation of core/shell structured polystyrene/anatase TiO2 photocatalyst via vapor phase hydrolysis10.1016/j.apcatb.2012.04.032 ↗
44. Fabrication of well-dispersive yttrium-stabilized cubic zirconia nanoparticles via vapor phase hydrolysis10.1016/j.pnsc.2011.12.003 ↗
45. Synthesis of Fe3O4/C/TiO2 magnetic photocatalyst via vapor phase hydrolysis10.1155/2012/365401 ↗
46. Formation of chemical bonds on zirconia surfaces with acidic functional monomers10.2334/josnusd.17-0160 ↗
47. Magnetically encoded luminescent composite nanoparticles through layer-by-layer self-assembly10.1002/chem.201403699 ↗
48. Micro- and nano-assembly of composite particles by electrostatic adsorption10.1186/s11671-019-3129-1 ↗
49. Aspects of bonding between resin luting cements and glass ceramic materials10.1016/j.dental.2014.01.017 ↗
50. Highly stable surface functionalization of microgas chromatography columns using layer-by-layer self-assembly of silica nanoparticles10.1021/ac401080u ↗
51. Enhanced photocatalytic properties of ZnO nanorods by electrostatic self-assembly with reduced graphene oxide10.1039/C7CP06909J ↗
52. Growth and characterization of CNT–TiO2 heterostructures10.3762/bjnano.5.108 ↗
53. A novel method for the synthesis of ZSM-5 zeolite membranes on a porous alumina tube: the role of a dry-gel barrier in pores10.1039/b004873i ↗
54. Universal coating from electrostatic self-assembly to prevent multidrug-resistant bacterial colonization on medical devices and solid surfaces10.1021/acsami.7b05230 ↗