journal article·2023-03Open access

A vertical additive-lathe printing system for the fabrication of tubular constructs using gelatin methacryloyl hydrogel

Faraz Fazal, Ferry P.W. Melchels, Andrew McCormack, Andreia F. Silva, Anthony Callanan, Vasileios Koutsos, Norbert Radacsi

Abstract

Reproducing both the mechanical and biological performance of native blood vessels remains an ongoing challenge in vascular tissue engineering. Additive-lathe printing offers an attractive method of fabricating long tubular constructs as a potential vascular graft for the treatment of cardiovascular diseases. Printing hydrogels onto rotating horizontal mandrels often leads to sagging, resulting in poor and variable mechanical properties. In this study, an additive-lathe printing system with a vertical mandrel to fabricate tubular constructs is presented. Various concentrations of gelatin methacryloyl (gelMA) hydrogel were used to print grafts on the rotating mandrel in a helical pattern. The printing parameters were selected to achieve the bonding of consecutive gelMA filaments to improve the quality of the printed graft. The hydrogel filaments were fused properly under the action of gravity on the vertical mandrel. Thus, the vertical additive-lathe printing system was used to print uniform wall thickness grafts, eliminating the hydrogel sagging problem. Tensile testing performed in both circumferential and longitudinal direction revealed that the anisotropic properties of printed gelMA constructs were similar to those observed in the native blood vessels. In addition, no leakage was detected through the walls of the gelMA grafts during burst pressure measurement. Therefore, the current printing setup could be utilized to print vascular grafts for the treatment of cardiovascular diseases.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Additive Manufacturing and 3D Printing Technologies · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Engineered small diameter vascular grafts by combining cell sheet engineering and electrospinning technology10.1016/j.actbio.2015.01.030 ↗
2. Trend analysis of cardiovascular disease mortality, incidence, and mortality-to-incidence ratio: results from global burden of disease study 2017
3. Fabrication and characterization of gels with integrated channels using 3D printing with microfluidic nozzle for tissue engineering applications10.1007/s10544-016-0042-6 ↗
4. Electrospun fibrous scaffolds for small-diameter blood vessels : a review10.3390/membranes8010015 ↗
5. Structural and rheological properties of methacrylamide modified gelatin hydrogels10.1021/bm990017d ↗
6. The mechanical characterization of blood vessels and their substitutes in the continuous quest for physiological-relevant performances. A critical review
7. Current strategies for the manufacture of small size tissue engineering vascular grafts10.3389/fbioe.2018.00041 ↗
8. Vascular tissue engineering: recent advances in small diameter blood vessel regeneration
9. Freeform inkjet printing of cellular structures with bifurcations10.1002/bit.25501 ↗
10. Bioprinting for vascular and vascularized tissue biofabrication10.1016/j.actbio.2017.01.035 ↗
11. Parallel fabrication of macroporous scaffolds10.1002/bit.26593 ↗
12. Three-dimensional fabrication of cell-laden biodegradable poly(ethylene glycol-co-depsipeptide) hydrogels by visible light stereolithography Laura10.1039/C5TB01468A ↗
13. Recent advancements in the bioprinting of vascular grafts10.1088/1758-5090/ac0963 ↗
14. A modified 3D printer as a hybrid bioprinting-electrospinning system for use in vascular tissue engineering applications10.1016/j.medengphy.2021.06.005 ↗
15. A bioink blend for rotary 3D bioprinting tissue engineered small-diameter vascular constructs10.1016/j.actbio.2019.06.052 ↗
16. Recent strategies in extrusion-based three-dimensional cell printing toward organ biofabrication10.1021/acsbiomaterials.8b00691 ↗
17. Assessment methodologies for extrusion-based bioink printability10.1088/1758-5090/ab6f0d ↗
18. Mechanical behaviour of alginate-gelatin hydrogels for 3D bioprinting10.1016/j.jmbbm.2017.12.018 ↗
19. Saphenous vein graft failure after coronary artery bypass surgery10.1097/SLA.0b013e318288c38d ↗
20. Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels10.1126/sciadv.1500758 ↗
21. 3D biofabrication for tubular tissue engineering10.1007/s42242-018-0013-2 ↗
22. Improved resolution and fidelity of droplet-based bioprinting by upward ejection10.1021/acsbiomaterials.9b00400 ↗
23. Extrusion bioprinting of soft materials: an emerging technique for biological model fabrication10.1063/1.5059393 ↗
24. Layer-by-layer printing of cells and its application to tissue engineering
25. Saphenous vein versus PTFE for above-knee femoropopliteal bypass . A review of the literature10.1016/j.ejvs.2003.12.027 ↗
26. Engineering of a complex bone tissue model with endothelialised channels and capillary-like networks10.22203/eCM.v035a23 ↗
27. Controlled fabrication of triple layered and molecularly defined collagen/elastin vascular grafts resembling the native blood vessel10.1016/j.actbio.2010.06.038 ↗
28. Biofabrication of three-dimensional cellular structures based on gelatin methacrylate–alginate interpenetrating network hydrogel10.1177/0885328218823329 ↗
29. Investigation of gelatin methacrylate working curves in dynamic optical projection stereolithography of vascular-like constructs10.1016/j.eurpolymj.2020.109487 ↗
30. Acellular vascular grafts generated from collagen and elastin analogues10.1016/j.actbio.2013.05.024 ↗
31. A bioprosthetic ovary created using 3D printed microporous scaffolds restores ovarian function in sterilized mice10.1038/ncomms15261 ↗
32. Comparison of the direct burst pressure and the ring tensile test methods for mechanical characterization of tissue-engineered vascular substitutes10.1016/j.jmbbm.2014.02.017 ↗
33. Reducing the global burden of cardiovascular disease, part 2: prevention and treatment of cardiovascular disease10.1161/CIRCRESAHA.117.311849 ↗
34. Engineering gelatin-based alginate/carbon nanotubes blend bioink for direct 3D printing of vessel constructs10.1016/j.ijbiomac.2019.12.174 ↗
35. In vivo performance of decellularized vascular grafts: a review article10.3390/ijms19072101 ↗
36. The synchronization among nozzle extrusion, nozzle speed and rotating speed based on 3D vessel bioprinter
37. 3D printing of artificial blood vessel: study on multi-parameter optimization design for vascular molding effect in alginate and gelatin10.3390/mi8080237 ↗
38. Bioactive Materials Additive-lathe 3D bioprinting of bilayered nerve conduits incorporated with supportive cells
39. Generating vascular conduits: from tissue engineering to three-dimensional bioprinting Scaffolds for TEVGs
40. Development and characterisation of a new bioink for additive tissue manufacturing10.1039/c3tb21280g ↗
41. Initial design and physical characterization of a polymeric device for osmosis-driven delayed burst delivery of vaccines10.1002/bit.25593 ↗
42. Bioprinting: from tissue and organ development to in vitro models10.1021/acs.chemrev.9b00789 ↗
43. Bioink properties before, during, and after 3D bioprinting
44. Ink jet three-dimensional digital fabrication for biological tissue manufacturing: analysis of alginate microgel beads produced by ink jet droplets for three dimensional tissue fabrication
45. 3D printing of personalized thick and perfusable cardiac patches and hearts
46. Mechanical properties of dilated human ascending aorta10.1114/1.1484220 ↗
47. Tissue engineered vascular grafts: current state of the field10.1080/17434440.2017.1324293 ↗
48. Bilateral arteriovenous shunts as a method for evaluating tissue-engineered vascular10.1089/ten.tec.2017.0217 ↗
49. 2017
50. Current advances and future perspectives in extrusion-based bioprinting10.1016/j.biomaterials.2015.10.076 ↗
51. Gelatin-methacryloyl (GelMA) hydrogels with defined degree of functionalization as a versatile toolkit for 3D cell culture and extrusion bioprinting10.3390/bioengineering5030055 ↗
52. Combining cell sheet technology and electrospun scaffolding for engineered tubular , aligned , and contractile blood vessels10.1016/j.biomaterials.2013.12.035 ↗
53. Three-Dimensional printing on a rotating cylindrical mandrel: a review of additive-lathe 3D printing technology10.1089/3dp.2019.0058 ↗
54. Hydrogels for bioprinting: a systematic review of hydrogels synthesis, bioprinting parameters, and bioprinted structures behavior bioprinting pre-printing
55. Vascular tissue engineering: progress, challenges, and clinical promise
56. 3D bioprinting technology for regenerative medicine applications10.18063/IJB.2016.02.010 ↗
57. Vascular replacement using a layered elastin-collagen vascular graft in a porcine model: one week patency versus one month occlusion Vascular replacement using a layered elastin-collagen vascular graft in a porcine model : one week patency versus one Mon
58. Biofabrication of 3D cell-encapsulated tubular constructs using dynamic optical projection stereolithography10.1007/s10856-019-6239-5 ↗
59. Development of human umbilical vein endothelial cell (HUVEC) and human umbilical vein smooth muscle cell (HUVSMC) branch/stem structures on hydrogel layers via biological laser printing (BioLP)10.1088/1758-5082/2/1/014111 ↗
60. Decellularized porcine saphenous artery for small-diameter tissue-engineered conduit graft10.1111/aor.12014 ↗
61. Freeform drop-on-demand laser printing of 3D alginate and cellular constructs10.1088/1758-5090/7/4/045011 ↗
62. Scaffold-free inkjet printing of three-dimensional zigzag cellular tubes10.1002/bit.24591 ↗
63. Bioprinting small diameter blood vessel constructs with an endothelial and smooth muscle cell bilayer in a single step10.1088/1758-5090/aba2b6 ↗
64. Three-dimensional bioprinting of gelatin methacryloyl (GelMA)10.1007/s42242-018-0028-8 ↗
65. Layer-by-layer ultraviolet assisted extrusion-based (UAE) bioprinting of hydrogel constructs with high aspect ratio for soft tissue engineering applications10.1371/journal.pone.0216776 ↗