Estimating tissue-level properties of porcine talar subchondral bone
Source abstract
Abstract
Tissue-level properties of bone play an important role when characterising apparent-level bone biomechanical behaviour and yet little is known about its effect at this hierarchical level. In combination with trabecular morphological data these properties can be used to predict bone strength, which becomes an invaluable tool for clinicians in patient treatment planning. This study developed specimen-specific micro-finite element (μFE) models using validated continuum-level models, containing grayscale-derived material properties, to indirectly establish tissue-level properties of porcine talar subchondral bone. Specimen-specific continuum finite element (hFE) models of subchondral trabecular bone were setup using μCT data of ten cylindrical specimens extracted from juvenile porcine tali. The models were validated using quasi-static uniaxial compression testing. Validated hFE models were used to calibrate the tissue modulus of corresponding μFE models by minimising the difference between the μFE and hFE stiffness values. Key trabecular morphological indices (BV/TV, DA, Conn.D, Tb.Th, EF) were evaluated. Good agreement was observed between hFE models and experiment (CCC = 0.66). Calibrated Etiss was 504 ± 37.65 MPa. Average BV/TV and DA for μFE specimens were 0.37 ± 0.05 and 0.68 ± 0.11, respectively. BV/TV (r2 = 0.667) correlated highly with μFE stiffness. The small intra-specimen variation to tissue-level properties suggests that variations to apparent-level stiffness originate from variations to microarchitecture rather than tissue mechanical properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Foot and Ankle Surgery · Bone and Joint Diseases · Orthopedic Surgery and Rehabilitation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Osteoarthritis in general practice - data and perspectives - arthritis research UK
2. Comparison of the elastic and yield properties of human femoral trabecular and cortical bone tissue10.1016/S0021-9290(03)00257-4 ↗
3. The influence of boundary conditions and loading mode on high-resolution finite element-computed trabecular tissue properties10.1016/j.bone.2008.11.015 ↗
4. Measuring agreement in method comparison studies10.1177/096228029900800204 ↗
5. An algorithm with guaranteed convergence for finding a zero of a function10.1093/comjnl/14.4.422 ↗
6. Posttraumatic osteoarthritis: a first estimate of incidence, prevalence, and burden of disease10.1097/01.bot.0000246468.80635.ef ↗
7. Review of current understanding of post-traumatic osteoarthritis resulting from sports injuries10.1002/jor.23341 ↗
8. The compressive behavior of bone as a two-phase porous structure10.2106/00004623-197759070-00021 ↗
9. NJRS Committee · 2019
10. Analysis of failed ankle arthroplasty components10.1177/1071100718802589 ↗
11. A decreased subchondral trabecular bone tissue elastic modulus is associated with pre-arthritic cartilage damage10.1016/S0736-0266(01)00012-2 ↗
12. Optimizing computational methods of modeling vertebroplasty in experimentally augmented human lumbar vertebrae10.1002/jsp2.1077 ↗
13. Post-traumatic osteoarthritis of the ankle: a distinct clinical entity requiring new research approaches10.1002/jor.23462 ↗
14. Waterjet drilling in porcine bone: the effect of the nozzle diameter and bone architecture on the hole dimensions10.1016/j.jmbbm.2013.06.012 ↗
15. The ellipsoid factor for quantification of rods, plates, and intermediate forms in 3d geometries10.3389/fendo.2015.00015 ↗
16. Bonej: free and extensible bone image analysis in imagej10.1016/j.bone.2010.08.023 ↗
17. Biomechanics and pathomechanisms of osteoarthritis10.4414/smw.2012.13583 ↗
18. Evidence-based classification of complications in total ankle arthroplasty10.3113/FAI.2009.0945 ↗
19. The demand incidence of symptomatic ankle osteoarthritis presenting to foot & ankle surgeons in the United Kingdom10.1016/j.foot.2012.02.005 ↗
20. Ankle arthritis and the treatment with ankle replacement10.1016/S0716-8640(14)70112-9 ↗
21. Posttraumatic ankle osteoarthritis after ankle-related fractures10.1097/BOT.0b013e31818915d9 ↗
22. Biomechanical effects of intraspecimen variations in tissue modulus for trabecular bone10.1016/S0021-9290(01)00193-2 ↗
23. Total ankle replacement10.1016/S0268-0890(02)00195-0 ↗
24. Trabecular bone modulus and strength can depend on specimen geometry10.1016/0021-9290(93)90059-N ↗
25. Koria · 2020
26. A concordance correlation coefficient to evaluate reproducibility
27. Mechanical properties of trabecular bone. dependency on strain rate10.1016/0021-9290(91)90305-7 ↗
28. Bone volume fraction and fabric anisotropy are better determinants of trabecular bone stiffness than other morphological variables10.1002/jbmr.2437 ↗
29. The role of fabric in the quasi-static compressive mechanical properties of human trabecular bone from various anatomical locations10.1007/s10237-006-0073-7 ↗
30. Mengoni · 2017
31. Using inverse finite element analysis to identify spinal tissue behaviour in situ
32. Derivation of inter-lamellar behaviour of the intervertebral disc annulus10.1016/j.jmbbm.2015.03.028 ↗
33. Comparative finite-element analysis: a single computational modelling method can estimate the mechanical properties of porcine and human vertebrae10.1098/rsif.2014.0186 ↗
34. Structure model index does not measure rods and plates in trabecular bone10.3389/fendo.2015.00162 ↗
35. Epidemiology of ankle arthritis: report of a consecutive series of 639 patients from a tertiary orthopaedic center
36. Etiology of ankle osteoarthritis10.1007/s11999-008-0543-6 ↗
37. A new method to determine trabecular bone elastic properties and loading using micromechanical finite-element models10.1016/0021-9290(95)80008-5 ↗
38. Trabecular plates and rods determine elastic modulus and yield strength of human trabecular bone10.1016/j.bone.2014.11.006 ↗
39. Development of specimen-specific finite element models of human vertebrae for the analysis of vertebroplasty10.1243/09544119JEIM285 ↗
40. Valid μ finite element models of vertebral trabecular bone can be obtained using tissue properties measured with nanoindentation under wet conditions10.1016/j.jbiomech.2010.02.026 ↗
41. Methodology to produce specimen-specific models of vertebrae: application to different species10.1007/s10439-017-1883-8 ↗