journal article·2021-05Open access

Evaluation of two CAD/CAM materials for Nayyar core and post-retained restorations: Three dimensional stress analysis

Nuran Ulusoy, Laden Gulec Alagoz

Abstract

OBJECTIVES: The aim of this study is to assess the stress distribution of a nanoceramic resin CAD/CAM material, Lava Ultimate (LU) and a polymer-infiltrated hybrid ceramic CAD/CAM material, Vita Enamic (VE) for enamel replacement for Nayyar core (corono-radicular dowel and core) or post-retained restoration designs of a maxillary first premolar tooth with missing palatal cusp. MATERIALS AND METHODS: A three dimensional finite element (FE) modelof maxillary first premolar with two roots was modeled. A mesial-occlusal-distal-palatal (MODP) cavity was designed with cavity floor above cemento-enamel junction and including buccal cuspal reduction. Restoration designs consisted of Nayyar core restoration (NCR) and post-retained restoration (PRR) with a glass fiber post. Vita Enamic (VE), Lava Ultimate (LU) were used for enamel and everX Posterior was used for dentin replacement. Vertical occlusal load (100 N) was applied on a spherical solid rigid material simulating the food stuff. Von Mises (VM) and maximum principle stress values were evaluated separately for the remaining enamel, remaining dentin and restorative material in megapascal (MPa). RESULTS: The analysis of both VM and maximum principle stress values revealed that the most intense stress accumulation was in the cervical region of enamel for both designs. For VM, similar stress values were observed only in dentin. Stress analysis of restorative materials showed that everX Posterior had the highest stress accumulation. CONCLUSIONS: The comparison of the two techniques showed that PRR had better stress distribution than NCR. NCR or PRR with LU or VE exhibited similar VM stress accumulation in dentin. Maximum principle stress analyses showed that PRR with LU transmitted the least stress to enamel and dentin indicating that when LU is the material of choice, post-retained restoration would be a satisfactory design. VM stress values of enamel revealed that VE absorbed the stress in itself and transferred less stress to dentin. This could point out that for the restoration of maxillary first premolar tooth with missing palatal cusp, VE may be a suitable material for NCR and PRR restoration techniques. HIGHLIGHTS: When fiber reinforced composite is used as dentin replacement in combination with VE as enamel replacement; any technique; PRR or NCR, may be preferred in the restoration of MODP cavities of endodontically treated maxillary premolars. The clinical relevance has to be further studied in-vivo.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Health and Care Utilization · Dental Erosion and Treatment

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Finite element analysis of stresses in endodontically treated, dowel-restored teeth10.1016/j.prosdent.2005.07.003 ↗
2. Non-linear elastic three-dimensional finite element analysis on the effect of endocrown material rigidity on alveolar bone remodeling process10.1016/j.dental.2008.10.015 ↗
3. Short fibre-reinforced composite for extensive direct restorations:a laboratory and computational assessment10.1007/s00784-015-1576-3 ↗
4. Fibre-based post systems: a review10.1038/sj.bdj.4810278 ↗
5. The restoration of root filled teeth: a review of the clinical literature
6. Fracture resistance of endodontically treated teeth restored with or without post systems10.1016/j.jds.2012.03.011 ↗
7. Fracture resistance and failure modes of CEREC endocrowns and conventional post and core-supported CEREC crowns10.1016/S1991-7902(09)60016-7 ↗
8. Determination of stress patterns in root-filled teeth incorporating various dowel designs10.1177/00220345810600070301 ↗
9. FEM analysis of the mandibular first premolar with different post diameters10.1007/s10266-011-0011-8 ↗
10. Fracture resistance of endodontically treated teeth restored with 2 different fiber-reinforced composite and 2 conventional composite resin core buildup materials:An in vitro study10.1016/j.joen.2017.03.031 ↗
11. Assessment of hybridization and push out bond strength of fiber post after endodontic retreatment. An invitro study10.21608/edj.2020.41787.1244 ↗
12. Conservative restoration of severely damaged endodontically treated premolar teeth: a FEM study10.1007/s00784-010-0397-7 ↗
13. Fracture resistance of endodontically treated anterior teeth restored with different post systems: an in vitro study
14. Fatigue resistance of teeth restored with cuspal-coverage composite restorations
15. Fracture strength and stress distributions of pulpless premolars restored with fiber posts10.4012/dmj.2014-113 ↗
16. Effect of endocrown restorations with different CAD/CAM Materials: 3D finite element and Weibull analyses10.1155/2017/5638683 ↗
17. Stress analysis of direct restoration techniques for endodontically treated maxillary premolars10.5152/cjms.2018.582 ↗
18. The effect of ferrule height on stress distribution within a tooth restored with fibre posts and ceramic crown: a finite element analysis10.1016/j.dental.2014.09.004 ↗
19. Effect of novel restoration techniques on the fracture resistance of teeth treated endodontically: an in vitro study10.4012/dmj.2014-326 ↗
20. Fracture resistance of premolars with one remaining cavity wall restored using different techniques10.4012/dmj.2009-061 ↗
21. Restoration of endodontically treated molars using fiber reinforced composite substructure
22. Numerical investigation of failure risk of CAD/CAM ceramic restoration for an endodontically treated maxillary premolar with MO preparation
23. Multi-factorial analysis of a cusp-replacing adhesive premolar restoration: a finite element study10.1016/j.jdent.2007.11.016 ↗
24. Estimation of the risk of failure for an endodontically treated maxillary premolar with MODP preparation and CAD/CAM ceramic restorations10.1016/j.joen.2009.06.020 ↗
25. Mechanical behavior of endodontic restorations with multiple prefabricated posts: a finite-element approach10.1016/j.jbiomech.2006.11.018 ↗
26. Effect of fiber post and cusp coverage on fracture resistance of endodontically treated maxillary premolars directly restored with composite resin10.1016/j.joen.2009.07.010 ↗
27. Fracture resistance of palatal cusps defective premolars restored with polyethylene fiber and composite resin10.4012/dmj.2015-394 ↗
28. Evaluation of two post and core systems using fracture strength test and finite element analysis10.4103/0972-0707.42354 ↗
29. An amalgam coronal-radicular dowel and core technique for endodontically treated posterior teeth10.1016/0022-3913(80)90322-4 ↗
30. Nelson · 2010
31. Effect of implant height differences on different attachment types and peri-implant bone in MandibularTwo-ImplantOverdentures: 3D finite element study10.1563/AAID-JOI-D-13-00239 ↗
32. Fracture resistance of endodontically treated molars restored with extensive composite resin restorations10.1016/S0022-3913(08)60047-5 ↗
33. Restoration of the endodontically treated posterior tooth10.1016/j.gien.2014.05.007 ↗
34. Tooth-colored post systems: a review
35. Evaluation of occlusal fracture resistance of three different core materials using the Nayyar core technique10.4103/2231-0762.175410 ↗
36. Fiber-reinforced resin coating for endocrown preparations: a technical report10.2341/12-139-TR ↗
37. Fracture resistance and failure patterns of endodontically treated mandibular molars restored using resin composite with or without translucent glass fiber posts10.1016/j.joen.2006.02.002 ↗
38. Patterns of indirect fracture in intact and restored human premolar teeth10.1111/j.1600-9657.1987.tb00165.x ↗
39. Can fiber posts increase root stresses and reduce fracture?10.1177/0022034510363382 ↗
40. Influence of adhesive techniques on fracture resistance of endodontically treated premolars with various residual wall thicknesses10.1016/j.prosdent.2013.08.001 ↗
41. Fracture resistance of the buccal cusps of root filled maxillary premolar teeth restored with various techniques10.1111/j.1365-2591.2007.01192.x ↗
42. Fracture resistance and stress distribution in endodontically treated maxillary premolars restored with composite resin10.1111/j.1532-849X.2007.00258.x ↗
43. Influence of restorative technique on the biomechanical behavior of endodontically treated maxillary premolars. Part I: fracture resistance and fracture mode10.1016/S0022-3913(08)60006-2 ↗
44. The influence of cavity design and glass fiber posts on biomechanical behavior of endodontically treated premolars10.1016/j.joen.2008.05.017 ↗
45. Evaluation of five CAD/CAM materials by microstructural characterization and mechanical tests: a comparative in vitro study10.1186/s12903-017-0458-2 ↗
46. Factors affecting retention of post systems: a literature review10.1016/S0022-3913(99)80002-X ↗
47. Are posts mandatory for the restoration of endodontically treated teeth?10.1111/j.1600-9657.1998.tb00810.x ↗
48. Influence of implant design and bone quality on stress/strain distribution in bone around implants: a 3-dimensional finiteelement analysis
49. Analysis of dentinal stress distribution of maxillary central incisors subjected to various post-and-core applications10.2341/04-192 ↗
50. Analysis of a restored maxillary second premolar tooth by using three dimensional finite element method10.1046/j.1365-2842.1999.00342.x ↗
51. Fracture durability of restored functional cusps on maxillary nonvital premolar teeth10.1016/0022-3913(91)90259-Y ↗
52. Chairside CAD/CAM materials. Part 2: flexuralstrengthtesting10.1016/j.dental.2016.10.008 ↗
53. Effects of different ceramic and composite materials on stress distribution in inlay and onlay cavities: 3-D finite element analysis10.4012/dmj.28.661 ↗