journal article·2022-12

Resistive coupled microwave sintering – A promising technique to fabricate bioceramics with improved properties

Y.V. Swapna, C.T. Mathew, Jijimon K Thomas

Publisher page

Abstract

Enhancing the mechanical properties of biocompatible hydroxyapatite is one of the major challenges in the fabrication of bone implants. In this work, phase pure samples of nano-hydroxyapatite with an average crystallite size of 22 nm, were synthesized by a modified single-step combustion technique. The samples were sintered by a novel resistive coupled microwave sintering technique to 98.4% of theoretical density at 1030 °C for a soaking duration of 20 min. The new method yielded pellets with an average grain size of 0.12 ± 0.01 μm, that showed an improved Vickers microhardness of 7.1 GPa, enhanced young's modulus of 110.51 ± 1.8 GPa, and better compressive strength of 172 ± 10 MPa compared to those pellets sintered via conventional resistive heating. The sintered samples showed better cell viability, cell adhesion, proliferation, differentiation, and osteogenic potential. The enhanced mechanical properties achieved by resistive coupled microwave sintering without compromising the biological properties is a remarkable result that can effectively be used in the fabrication of high-quality bone substitutes.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Collagen maturity and mineralization in mesenchymal stem cells cultured on the hydroxyapatite based bone scaffold analysed by ATR-FTIR spectroscopic imaging
2. In vitro biocompatibility and antimicrobial activity of wet chemically prepared Ca10-xAgx(PO4)6(OH)2(0.0<x<0.5) hydroxyapatites10.1016/j.msec.2011.04.015 ↗
3. Brown · 1994
4. One pot method to synthesize three-dimensional porous hydroxyapatite nanocomposite for bone tissue engineering10.1007/s10934-019-00805-y ↗
5. Structural and electrical characterizations of hydrothermally grown hydroxyapatite polycrystals: a morphological hierarchy10.1063/1.5096452 ↗
6. Effects of chloride substitution on physical, mechanical and biological properties of hydroxyapatite
7. Direct microwavesintering of pure alumina in a single mode cavity: grain size and phase transformation effects10.1016/j.actamat.2016.06.027 ↗
8. Effect of grain size on mechanical, surface and biological properties of microwave sintered hydroxyapatite10.1016/j.msec.2013.03.004 ↗
9. Indentation size effect in metallic materials: modeling strength from pop-in to macroscopic hardness using geometrically necessary dislocations10.1016/j.actamat.2006.01.036 ↗
10. Hydroxyapatite based nanoparticles as coating material for the dentine surface: an antibacterial and toxicological effect10.1016/j.ceramint.2019.08.260 ↗
11. Fabrication of porous hydroxyapatite ceramics by microwave processing10.1557/JMR.1992.0490 ↗
12. Fabrication of transparent hydroxyapatite ceramics by ambient-pressure sintering10.1016/0167-577X(95)00016-X ↗
13. Microwave sintering of hydroxyapatite ceramics10.1557/JMR.1994.0180 ↗
14. Microwave sintering of hydroxyapatite based composites
15. Rapid sintering of hydroxyapatite by microwave sintering
16. An energy-balance analysis for the size effect in low-load hardness testing10.1023/A:1004777607553 ↗
17. Load dependence of the apparent hardness of silicon nitride in a wide range of loads10.1016/S0167-577X(97)00234-6 ↗
18. 3D patterning of cells in magnetic scaffolds for tissue engineering10.1038/s41598-020-58738-5 ↗
19. Bone-like apatite layer formation on hydroxyapatite prepared by spark plasma sintering (SPS)10.1016/j.biomaterials.2003.11.030 ↗
20. Recent advances in synthesis, functionalization and biomedical applications of hydroxyapatite: a review10.1039/C6RA26124H ↗
21. Biocompatibility and osteogenesis of biomimetic nano-hydroxyapatite/polyamide composite scaffolds for bone tissue engineering10.1016/j.biomaterials.2007.04.014 ↗
22. In situ measurement of shrinkage and temperature profile in microwave and conventionally sintered hydroxyapatite bioceramic10.1016/j.matlet.2015.08.136 ↗
23. Processing of AB type carbonated hydroxyapatite Ca10-x(PO4)6-x(CO3)x(OH)2-x-2y(CO3)y ceramics with controlled composition10.1016/j.jeurceramsoc.2007.06.009 ↗
24. Scherrer after sixty years: a survey and some new results in the determination of crystallite size10.1107/S0021889878012844 ↗
25. Hydroxyapatite synthesized by a simplified hydrothermal method10.1016/0272-8842(95)00135-2 ↗
26. Rapid formation of hydroxyapatite nanostructures by microwave irradiation10.1016/j.cplett.2004.08.094 ↗
27. Grain growth and Hall-Petch relationship in a high-entropy FeCrNiCoMn alloy10.1016/j.scriptamat.2012.12.002 ↗
28. Synthesis of nano-hydroxyapatite under a sonochemical/hydrothermal condition10.1088/1748-6041/3/2/025002 ↗
29. Evaluation of the effects of starch on polyhydroxybutyrate electrospun scaffolds for bone tissue engineering applications10.1016/j.ijbiomac.2021.09.078 ↗
30. Infrared transmittance of hybrid microwave sintered yttria10.1016/j.ceramint.2015.04.100 ↗
31. A comprehensive analysis of the influence of resistive coupled microwave sintering on the optical, thermal and hardness properties of infrared transparent yttria-magnesia composites10.1016/j.ceramint.2017.09.117 ↗
32. Synthesis methods for nanosized hydroxyapatite in diverse structures
33. Recent advances in biomedical engineering of nano-hydroxyapatite including dentistry, cancer treatment and bone repair
34. Hydroxyapatite and hydroxyapatite-based ceramics10.1023/A:1020585800572 ↗
35. A review on the synthesis of hydroxyapatite, its composites and adsorptive removal of pollutants from wastewater
36. Preparation and characterization of a hydroxyapatite-collagen composite as component for injectable bone substitute10.1016/j.msec.2009.04.021 ↗
37. Strategies for the design of additively manufactured nanocomposite scaffolds for hard tissue degeneration10.21014/acta_imeko.v9i4.739 ↗
38. Development of hybrid scaffold with biomimetic 3D architecture for bone regeneration10.1016/j.nano.2018.03.011 ↗
39. Synthesis, characterization and ab initio simulation of magnesium substituted hydroxyapatite10.1016/j.actbio.2009.12.044 ↗
40. Assessing hardness and fracture toughness in sintered zinc oxide ceramics through indentation technique10.1016/j.msea.2015.05.107 ↗
41. Mass transport in ionic crystals induced by the ponderomotive action of a high frequency electric field10.1103/PhysRevB.52.3030 ↗
42. Surface potential and roughness controlled cell adhesion and collagen formation in electrospun PCL fibres for bone regeneration
43. Solution combustion synthesis of bioceramic calcium phosphates by single and mixed fuels-A comparative study10.1016/j.ceramint.2007.03.009 ↗
44. Synthesis of Hydroxyapatite Fibres using Electro Spinning: a study of phase evolution based on polymer matrix10.1016/j.jeurceramsoc.2020.01.070 ↗
45. A three-dimensional hydroxyapatite/polyacrylonitrile composite scaffold designed for bone tissue engineering10.1039/C7RA12449J ↗
46. Microwave sintering and kinetic analysis of Y2O3-MgO composites10.1016/j.ceramint.2014.02.106 ↗
47. Microwave processed nanocrystalline hydroxyapatite : simultaneous enhancement of mechanical and biological properties10.1016/j.actbio.2010.03.016 ↗
48. Electrospun polyurethane/hydroxyapatite bioactive scaffolds for bone tissue engineering: the role of solvent and hydroxyapatite particles10.1016/j.jmbbm.2014.06.019 ↗
49. Influence of La3+ ion in the yttria matrix in improving the microhardness of infrared transparent nano LaxY2-xO3 sintered via hybrid heating10.1007/s40145-017-0235-3 ↗
50. Silver and fluoride doped hydroxyapatites: Investigation by microstructure, mechanical and antibacterial properties10.1016/j.ceramint.2013.04.088 ↗
51. Regulation of cell locomotion by nanosecond-laser-induced hydroxyapatite patterning10.1016/j.bioactmat.2021.03.025 ↗
52. Comparing bone tissue engineering efficacy of HDPSCs, HBMSCs on 3D biomimetic ABM-P-15 scaffolds in vitro and in vivo10.1007/s10616-020-00414-7 ↗
53. Preparation of hydroxyapatite fibres by electrospinning technique10.1111/j.1151-2916.2004.tb06351.x ↗
54. Microwave versus conventional sintering: estimate of the apparent activation energy for densification of α-alumina and zinc oxide10.1016/j.jeurceramsoc.2014.04.006 ↗
55. CO2 gas activated sintering of carbonated hydroxyapatites10.1016/j.jeurceramsoc.2010.09.005 ↗