journal article·2022-12

Cyclic loading history alters the joint compression tolerance and regional indentation responses in the cartilaginous endplate

Jackie D. Zehr, Jeff M. Barrett, Jack P. Callaghan

Publisher page

Abstract

This study quantified the effect of subthreshold loading histories that differed by joint posture (neutral, flexed), peak loading variation (10%, 20%, 40%), and loading duration (1000, 3000, 5000 cycles) on the post-loading Ultimate Compressive Tolerance (UCT), yield force, and regional Cartilaginous End Plate (CEP) indentation responses (loading stiffness and creep displacement). One hundred and fourteen porcine spinal units were included. Following conditioning and cyclic compression exposures, spinal units were transected and one endplate from each vertebra underwent subsequent UCT or microindentation testing. UCT testing was conducted by compressing a single vertebra at a rate of 3 kN/s using an indenter fabricated to a representative intervertebral disc size and shape. Force and actuator position were sampled at 100 Hz. Non-destructive uniaxial CEP indentation was performed at five surface locations (central, anterior, posterior, right, left) using a Motoman robot and aluminum indenter (3 mm hemisphere). Force and end-effector position were sampled at 10 Hz. A significant three-way interaction was observed for UCT (p = 0.038). Compared to neutral, the UCT was, on average, 1.9 kN less following each flexed loading duration. No effect of variation was observed in flexion; however, 40% variation caused the UCT to decrease by an average of 2.13 kN and 2.06 kN following 3000 and 5000 cycles, respectively. The indentation stiffness in the central CEP mimicked the UCT response. These results demonstrate a profound effect of posture on post-loading UCT and CEP behaviour. Control of peak compression exposures became particularly relevant only when a neutral posture was maintained and beyond the midpoint of the predicated lifespan.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Spine and Intervertebral Disc Pathology · Musculoskeletal pain and rehabilitation · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Prolapsed intervertebral disc. A hyperflexion injury10.1097/00007632-198205000-00002 ↗
2. Changes of lumbar posture and tissue loading during static trunk bending10.1016/j.humov.2017.11.006 ↗
3. Spine loading during laboratory-simulated fireground operations –Inter-individual variation and method of load quantification10.1080/00140139.2019.1657183 ↗
4. Cartilage endplate thickness variation measured by ultrashort Echo-Time MRI is associated with adjacent disc degeneration10.1097/BRS.0000000000002432 ↗
5. Prediction of compressive strength of vertebral bodies of the lumbar spine by quantitative computed tomography10.1007/BF00401809 ↗
6. Bogduk · 2012
7. Fatigue failure of human lumbar vertebrae10.1016/S0268-0033(88)80001-9 ↗
8. Prediction of compressive strength of human lumbar vertebrae
9. Vertebral end-plate fractures as a result of high rate pressure loading in the nucleus of the young adult porcine spine10.1016/j.jbiomech.2007.07.005 ↗
10. In vitro biomechanical characteristics of the spine: a comparison between human and porcine spinal segments10.1097/BRS.0b013e3181b21885 ↗
11. Intervertebral disc herniation: studies on a porcine model exposed to highly repetitive flexion/extension motion with compressive force10.1016/S0268-0033(00)00063-2 ↗
12. Low back joint loading and kinematics during standing and unsupported sitting10.1080/00140130118276 ↗
13. Low back three-dimensional joint forces, kinematics, and kinetics during walking10.1016/S0268-0033(98)00069-2 ↗
14. A qualitative study of health problems, risk factors, and prevention among Emergency Medical Service workers
15. Englemark · 1961
16. Influence of biochemical composition on endplate cartilage tensile properties in the human lumbar spine10.1002/jor.22516 ↗
17. Firefighter injuries are not just a fireground problem
18. Tensile Properties of the human annulus fibrosus
19. An exploratory study of loading and morphometric factors associated with specific failure modes in fatigue testing of lumbar motion segments10.1016/j.clinbiomech.2005.10.001 ↗
20. Spinal compression tolerance limits for the design of manual material handling operations in the workplace10.1080/00140139308967899 ↗
21. Biomechanicl and endplate effects on nutrient transport in the intervertebral disc10.1016/j.wneu.2016.12.041 ↗
22. Identifying interactive effect of task demands in lifting on estimates of in vivo low back joint loads10.1016/j.apergo.2017.10.005 ↗
23. Exploring interactions between force, repetition and posture on intervertebral disc height loss and bulging in isolated porcine cervical functional spinal units from sub-acute-failure magnitudes of cyclic compressive loading10.1016/j.jbiomech.2015.08.023 ↗
24. Characterizing the combined effects of force, repetition and posture on injury pathways and micro-structural damage in isolated functional spinal units from sub-acute-failure magnitudes of cyclic compressive loading10.1016/j.clinbiomech.2015.07.003 ↗
25. The impact of posture and prolonged cyclic compressive loading on vertebral joint mechanics10.1097/BRS.0b013e318256f9e6 ↗
26. An EMG-assisted model of trunk loading during free-style lifting10.1016/0021-9290(95)00003-Z ↗
27. Mapping the structural properties of the lumbosacral vertebral endplates
28. ISSLS prize winner: dynamic loading–induced convective transport enhances intervertebral disc nutrition10.1097/BRS.0000000000001012 ↗
29. Spinal posture and prior loading history modulate compressive strength and type of failure in the spine: a biomechanical study using a cervical porcine model10.1016/S0268-0033(01)00032-8 ↗
30. Mechanical behavior of the human lumbar spine II. Fatigue strength during dynamic compressive loading10.1002/jor.1100050403 ↗
31. Musculoskeletal injuries: description of an under-recognized injury problem among military personnel10.1016/j.amepre.2009.10.021 ↗
32. A study on the structural properties of the lumbar endplate10.1097/BRS.0b013e3181a2ea0a ↗
33. Can the lumbar spine be crashed in heavy lifting10.1097/00007632-198211000-00012 ↗
34. Biomechanical analysis and assessment of lumbar stress during loading lifting using a dynamic 19 segment human model10.1080/00140138908966070 ↗
35. Soldiers with musculoskeletal injuries10.1111/j.1547-5069.2008.00237.x ↗
36. Tissue shear deformation stimulates proteoglycan and protein biosynthesis in bovine cartilage explants10.1006/abbi.2001.2543 ↗
37. Are injuries more common with CrossFit training than other forms of exercise?10.1123/jsr.2016-0040 ↗
38. The role of the vertebral endplate in low back pain10.1055/s-0033-1347298 ↗
39. Statistical factorial analysis on the poroelastic material properties sensitivity of the lumbar intervertebral disc under compression, flexion and axial rotation10.1016/j.jbiomech.2009.07.039 ↗
40. Lumbar spine forces during manoeuvering of ceiling-based and floor-based patient transfer devices10.1080/00140130802376075 ↗
41. 1981
42. Correlation of vertebral strength topography with 3-dimensional computed tomographic structure10.1097/BRS.0b013e31826c670d ↗
43. Description and rate of musculoskeletal injuries in air force basic military trainees, 2012−201410.4085/1062-6050-51.10.10 ↗
44. The stabilizing system of the spine: Part I: function, dysfunction, adaptation, and enhancement10.1097/00002517-199212000-00001 ↗
45. The role of load magnitude as a modifier of the cumulative load tolerance of porcine cervical spinal units: progress towards a force weighting approach10.1080/14639220500093160 ↗
46. The role of dynamic flexion in spine injury is altered by increasing dynamic load magnitude10.1016/j.clinbiomech.2008.11.007 ↗
47. Estimating the compressive strength of the porcine cervical spine: an examination of the utility of DXA10.1097/01.brs.0000176246.54774.54 ↗
48. Evaluation and prediction of human lumbar vertebrae endplate mechanical properties using indentation and computed tomography10.1115/1.4040252 ↗
49. Physical activity and strength of the lumbar spine10.1097/00007632-198902000-00009 ↗
50. Biomechanical risk assessment during field loading of hydraulic stretchers into ambulances10.1016/j.ergon.2015.11.014 ↗
51. Morphology of the human vertebral endplate10.1002/jor.21513 ↗
52. Mechanical properties of human lumbar spine motion segments—Part I: responses in flexion, extension, lateral bending, and torsion10.1115/1.3426223 ↗
53. Defining the neutral zone of sheep intervertebral joints during dynamic motions: an in vitro study10.1016/S0268-0033(02)00180-8 ↗
54. Within-subject variability in low back load in a repetitively performed, mildly constrained lifting task10.1097/00007632-200108150-00016 ↗
55. Stress distribution changes in bovine vertebrae just below the endplate after sustained loading10.1016/S0268-0033(00)00105-4 ↗
56. Intradiscal pressure depends on recent loading and correlates with disc height and compressive stiffness10.1007/s00586-014-3450-4 ↗
57. Lumbar spinal pathology in cadaveric material in relation to history of back pain, occupation, and physical loading
58. Injury rate and patterns among CrossFit athletes
59. New in vivo measurements of pressures in the intervertebral disc in daily life10.1097/00007632-199904150-00005 ↗
60. The porcine cervical spine as a model of the human lumbar spine: an anatomical, geometric, and functional comparison10.1097/00002517-199912050-00012 ↗
61. Joint fatigue-failure: a demonstration of viscoelastic responses to rate and frequency loading parameters using the porcine cervical spine10.1016/j.jbiomech.2020.110081 ↗
62. Reaction forces and flexion-extension moments imposed on functional spinal units with constrained and unconstrained in vitro testing systems10.1115/1.4053208 ↗
63. A comparative analysis of lumbar spine mechanics during barbell- and crate-lifting: implications for occupational lifting task assessments
64. Using relative phase analyses and vector coding to quantify pelvis-thorax coordination during lifting—a methodological investigation10.1016/j.jelekin.2018.02.004 ↗
65. Examining endplate fatigue failure during cyclic compression loading with variable and consistent peak magnitudes using a force weighting adjustment approach: an in vitro study10.1080/00140139.2019.1648879 ↗
66. Incorporating loading variability into in vitro injury analyses and its effect on cumulative compression tolerance in porcine cervical spine units10.1016/j.jbiomech.2019.03.011 ↗