Numerical design of open-porous titanium scaffolds for Powder Bed Fusion using Laser Beam (PBF-LB)
Source abstract
Abstract
The paper concerns the numerical design of novel three-dimensional titanium scaffolds with complex open-porous structures and desired mechanical properties for the Powder Bed Fusion using Laser Beam (PBF-LB). The 60 structures with a broad range of porosity (38-78%), strut diameters (0.70-1.15 mm), and coefficients of pore volume variation, CV(Vp), 0.35-5.35, were designed using the Laguerre-Voronoi tessellations (LVT). Their Young's moduli and Poisson's ratios were calculated using Finite Element Model (FEM) simulations. The experimental verification was performed on the representative designs additively manufactured (AM) from commercially pure titanium (CP Ti) which, after chemical polishing, were subjected to uniaxial compression tests. Scanning Electron Microscopy (SEM) observations and microtomography (μ-CT) confirmed the removal of the support structures and unmelted powder particles. PBF-LB structures after chemical polishing were in close agreement with the CAD models' dimensions having 4-12% more volume. The computational and experimental results show that elastic properties were predicted in very close agreement for the low CV(Vp), and with even 30-40% discrepancies for CV(Vp) higher than 4.0, mainly due to PBF-LB scaffold architecture drawbacks rather than CAD inaccuracy. Our research demonstrates the possibility of designing the open-porous scaffolds with pore volume diversity and tuning their elastic properties for biomedical applications.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (78)
Show source-provided references
1. Experimental design and investigation on the mechanical behavior of novel 3D printed biocompatibility polycarbonate scaffolds for medical applications10.1016/j.jmapro.2018.08.035 ↗
2. Fully porous 3D printed titanium femoral stem to reduce stress-shielding following total hip arthroplasty10.1002/jor.23445 ↗
3. Voronoi diagrams—a survey of a fundamental geometric data structure10.1145/116873.116880 ↗
4. Aluminium foams for lighter vehicles10.1504/IJVD.2005.006640 ↗
5. Manufacture, characterisation and application of cellular metals and metal foams10.1016/S0079-6425(00)00002-5 ↗
6. Novel open cell aluminum foams and their use as reactive support for zeolite crystallization10.1007/s10934-010-9359-3 ↗
7. Multi-material Ti6Al4V & PEEK cellular structures produced by Selective Laser Melting and Hot Pressing: a tribocorrosion study targeting orthopedic applications10.1016/j.jmbbm.2018.09.009 ↗
8. Additive manufacturing of NiTi-Ti6Al4V multi-material cellular structures targeting orthopedic implants10.1016/j.optlaseng.2020.106208 ↗
9. Microstructure and compression properties of 3D powder printed Ti-6Al-4V scaffolds with designed porosity: experimental and computational analysis10.1016/j.msec.2016.09.040 ↗
10. Mechanical influences in bone remodeling. Experimental research on Wolff's law10.1016/0021-9290(72)90053-X ↗
11. Additively manufactured 3D porous Ti-6Al-4V constructs mimic trabecular bone structure and regulate osteoblast proliferation, differentiation and local factor production in a porosity and surface roughness dependent manner10.1088/1758-5082/6/4/045007 ↗
12. The role of stiffness-matching in avoiding stress shielding-induced bone loss and stress concentration-induced skeletal reconstruction device failure
13. Chmielewska
14. Hybrid solid-porous titanium scaffolds
15. Layered modeling of porous structures with Voronoi diagrams
16. Mechanics of cellular and other low-density materials10.1016/S0020-7683(99)00080-3 ↗
17. Application of digital correlation methods to rigid body mechanics
18. Characterisation of in-situ alloyed titanium-tantalum lattice structures by laser powder bed fusion using finite element analysis10.1080/17452759.2022.2138463 ↗
19. Cloots, M., Spierings, A.B., Wegener, K., n.d. “Assessing New Support Minimizing Strategies for the Additive Manufacturing Technology SLM.”.
20. Impact response of aluminum foam sandwiches for light-weight ship structures10.3390/met1010098 ↗
21. Elastic properties of open cell metallic foams—modeling of pore size variation effect10.3390/ma15196818 ↗
22. Incorporation of the pore size variation to modeling of the elastic behaviour of metallic open-cell foams10.1515/amm-2017-0039 ↗
23. Queries on Voronoi diagrams of moving points10.1016/0925-7721(95)00053-4 ↗
24. Properties and applications of additively manufactured metallic cellular materials: a review10.1016/j.pmatsci.2021.100918 ↗
25. Pressure drop modeling on SOLID foam: state-of-the art correlation10.1016/j.cej.2008.06.007 ↗
26. Metrological characterization of porosity graded β-Ti21S triply periodic minimal surface cellular structure manufactured by laser powder bed fusion
27. Manufacturability of functionally graded porous β-Ti21S auxetic architected biomaterials produced by laser powder bed fusion: comparison between 2D and 3D metrological characterization
28. Ductility of a Ti-6Al-4V alloy produced by selective laser melting of prealloyed powders10.1108/13552541011083371 ↗
29. Simulation of polycrystalline structure with Voronoi diagram in Laguerre geometry based on random closed packing of spheres10.1016/j.commatsci.2003.10.006 ↗
30. The morphology of anisotropic 3D-printed hydroxyapatite scaffolds10.1016/j.biomaterials.2008.06.012 ↗
31. Gibson · 1997
32. New femoral designs: do they influence stress shielding?
33. Effective elastic behavior of some models for perfect cellular solids10.1016/S0020-7683(98)00048-1 ↗
34. Micromotion and friction evaluation of a novel surface architecture for improved primary fixation of cementless orthopaedic implants10.1016/j.jmbbm.2013.01.017 ↗
35. The potential application of a Cobalt Chrome Molybdenum femoral stem with functionally graded orthotropic structures manufactured using Laser Melting technologies10.1016/j.mehy.2013.10.012 ↗
36. Strain distribution in the proximal human femur. An in vitro comparison in the intact femur and after insertion of reference and experimental femoral stems10.1302/0301-620X.83B2.0830295 ↗
37. Elastic properties of equilibrium foams10.1016/j.actamat.2016.01.025 ↗
38. Symmetry effects and their influence on the mechanical behavior of open and closed cell Al foams10.1016/j.matdes.2010.04.039 ↗
39. 3D image analysis of open foams using random tessellations10.5566/ias.v25.p87-93 ↗
40. Influence of sagittal root positions on the stress distribution around custom-made root-analogue implants: a three-dimensional finite element analysis10.1186/s12903-021-01809-4 ↗
41. A relationship between the geometrical structure of a nanoporous metal foam and its modulus10.1016/j.actamat.2013.01.011 ↗
42. Comparison of different post processing technologies for SLM generated 316l steel parts10.1108/13552541311312166 ↗
43. Numerical investigation of impact behavior of strut-based cellular structures designed by spatial Voronoi tessellation10.3390/met12071189 ↗
44. Heat transfer in open-cell metal foams10.1016/S1359-6454(98)00031-7 ↗
45. Metal material, properties and design methods of porous biomedical scaffolds for additive manufacturing: a review10.3389/fbioe.2021.641130 ↗
46. In vitro evaluation of a low-modulus mesh canine prosthetic hip stem10.2460/ajvr.71.9.1089 ↗
47. Characterization of cellular solids in Ti6Al4V for orthopaedic implant applications: trabecular titanium10.1016/j.jmbbm.2010.02.001 ↗
48. Recent research and development in titanium alloys for biomedical applications and healthcare goods10.1016/j.stam.2003.09.002 ↗
49. Recent metallic materials for biomedical applications10.1007/s11661-002-0109-2 ↗
50. Digital imaging techniques in experimental stress analysis10.1117/12.7972925 ↗
51. On the elastic deformation behavior of nanoporous metal foams10.1016/j.scriptamat.2013.08.027 ↗
52. Effects of binder system and processing parameters on formability of porous Ti/HA composite through powder injection molding10.1016/j.matdes.2015.08.031 ↗
53. Microstructure models for cellular materials10.1016/j.commatsci.2008.09.018 ↗
54. Pressure drop in flow across ceramic foams—a numerical and experimental study10.1016/j.ces.2015.06.043 ↗
55. Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation10.1016/S0142-9612(97)00073-2 ↗
56. Elastic properties of model random three-dimensional open- cell solid10.1016/S0022-5096(01)00056-4 ↗
57. Three-dimensional shape optimization of hip prostheses using a multicriteria formulation10.1007/s00158-006-0072-4 ↗
58. Novel design for an additively manufactured nozzle to produce tubular scaffolds via fused filament fabrication
59. The influence of pore size variation on the pressure drop in open-cell foams10.1016/j.matdes.2015.08.079 ↗
60. New multifunctional lightweight materials based on cellular metals - manufacturing, properties and applications
61. Functional adaptation and ingrowth of bone vary as a function of hip implant stiffness10.1016/S0021-9290(98)00096-7 ↗
62. Determination of displacements using an improved digital correlation method10.1016/0262-8856(83)90064-1 ↗
63. Taheri Andani
64. A study of the microstructural evolution during selective laser melting of Ti–6Al–4V10.1016/j.actamat.2010.02.004 ↗
65. LXIII. On the division of space with minimum partitional area. London, Edinburgh, Dublin Philos
66. Reducing stress concentration on the cup rim of hip implants under edge loading10.1002/cnm.3149 ↗
67. Finite element analysis of the mechanical properties of cellular aluminium based on micro-computed tomography10.1016/j.msea.2011.02.031 ↗
68. Linear elastic behavior of a low-density Kelvin foam with open cells10.1115/1.2788983 ↗
69. Modeling structures of cellular materials for application at various length-scales
70. Structure of foams modeled by Laguerre-Voronoi tessellations10.1016/j.commatsci.2012.08.046 ↗
71. Numerical optimization of open-porous bone scaffold structures to match the elastic properties of human cortical bone10.1016/j.jmbbm.2014.05.002 ↗
72. The influence of chemical polishing of titanium scaffolds on their mechanical strength and in-vitro cell response10.1016/j.msec.2018.04.019 ↗
73. Post processing and biological evaluation of the titanium scaffolds for bone tissue engineering10.3390/ma9030197 ↗
74. Microstructure and mechanical properties investigation of CP titanium processed by selective laser melting (SLM)10.1016/j.jmatprotec.2016.10.022 ↗
75. Laser and electron beam additive manufacturing methods of fabricating titanium bone implants10.3390/app7070657 ↗
76. Preparation and mechanical property of a novel 3D porous magnesium scaffold for bone tissue engineering10.1016/j.msec.2014.05.044 ↗
77. Effects of cell irregularity on the elastic properties of open-cell foams10.1016/S1359-6454(00)00282-2 ↗
78. Analysis of the elastic properties of open-cell foams with tetrakaidecahedral cells10.1016/S0022-5096(96)00090-7 ↗