journal article·2012-10

Identifying the dynamic compressive stiffness of a prospective biomimetic elastomer by an inverse method

Steven P. Mates, Aaron M. Forster, Donald Hunston, Richard Rhorer, Richard K. Everett, Kirth E. Simmonds, Amit Bagchi

Publisher page

Abstract

Soft elastomeric materials that mimic real soft human tissues are sought to provide realistic experimental devices to simulate the human body's response to blast loading to aid the development of more effective protective equipment. The dynamic mechanical behavior of these materials is often measured using a Kolsky bar because it can achieve both the high strain rates (>100s(-1)) and the large strains (>20%) that prevail in blast scenarios. Obtaining valid results is challenging, however, due to poor dynamic equilibrium, friction, and inertial effects. To avoid these difficulties, an inverse method was employed to determine the dynamic response of a soft, prospective biomimetic elastomer using Kolsky bar tests coupled with high-speed 3D digital image correlation. Individual tests were modeled using finite elements, and the dynamic stiffness of the elastomer was identified by matching the simulation results with test data using numerical optimization. Using this method, the average dynamic response was found to be nearly equivalent to the quasi-static response measured with stress-strain curves at compressive strains up to 60%, with an uncertainty of ±18%. Moreover, the behavior was consistent with the results in stress relaxation experiments and oscillatory tests although the latter were performed at lower strain levels.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Elasticity and Material Modeling · Automotive and Human Injury Biomechanics · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Overview of identification methods of mechanical parameters based on full-field measurements10.1007/s11340-008-9148-y ↗
2. Constitutive modeling of the large strain time-dependent behavior of elastomers10.1016/S0022-5096(97)00075-6 ↗
3. Inertial effects in quartz force transducers embedded in a split Hopkinson pressure bar10.1007/BF02428167 ↗
4. Dynamic compression testing of soft materials10.1115/1.1464871 ↗
5. Identification of mechanical material behavior through inverse modeling and DIC10.1007/s11340-007-9094-0 ↗
6. Correlated Solutions Inc., Columbia, SC, USA, 〈www.correlatedsolutions.com〉, 2011.
7. Dassault Systèmes, Vélizy-Villacoublay, France, 〈www.simulia.com/products/abaqus_explicit.html〉, 2011a.
8. Dassault Systèmes, Vélizy-Villacoublay, France, 〈www.simulia.com/products/isight.html〉, 2011b.
9. Mechanical characteristics of human skin subjected to static versus cyclic normal pressures
10. Ferry · 1980
11. Fung · 1993
12. Hyperelastic behavior identification by a forward problem resolution: application to a tear test of a silicone-rubber10.1111/j.1475-1305.2006.00285.x ↗
13. Multiquadratic equations of topography and other irregular surfaces10.1029/JB076i008p01905 ↗
14. A procedure for identifying the plastic behavior of single crystals from the local response of polycrystals10.1016/S1359-6454(03)00413-0 ↗
15. Viscoplastic parameter estimation by high strain-rate experiments and inverse modeling—Speckle measurements and high-speed photography10.1016/j.ijsolstr.2006.04.018 ↗
16. Inverse finite element characterization of soft tissues10.1016/S1361-8415(02)00085-3 ↗
17. High rate shear strain of three-dimensional neural cell cultures: a new in vitro traumatic brain injury model10.1016/j.jbiomech.2004.05.032 ↗
18. A comprehensive study of a multiplicative elastoplasticity model coupled to damage including parameter identification10.1016/S0045-7949(98)00296-X ↗
19. Method of testing very soft biological tissues in compression10.1016/j.jbiomech.2004.03.004 ↗
20. Regional, directional and age-dependent properties of the brain undergoing large deformation
21. The nonlinear material properties of liver tissue determined from no-slip uniaxial compression experiments
22. Use of 3D digital image correlation to characterize the mechanical behavior of a fiber reinforced refractory castable10.1007/s11340-007-9062-8 ↗
23. Computational and experimental models of the human torso for non-penetrating ballistic impact
24. Digital Image Mechanical Identification (DIMI)10.1007/s11340-007-9103-3 ↗
25. Mechanical properties of soft human tissues under dynamic loading10.1016/j.jbiomech.2006.09.021 ↗
26. Measurement of dynamic bulk and shear response of soft human tissues10.1007/s11340-007-9052-x ↗
27. Dynamic stress equilibration in split Hopkinson pressure bar tests on soft materials10.1007/BF02427897 ↗
28. Radial inertia effects in Kolsky bar testing of extra-soft specimens10.1007/s11340-006-9017-5 ↗
29. Constitutive modeling of rate-dependent stress–strain behavior of human liver in blunt impact loading10.1007/s10439-008-9555-3 ↗
30. Sutton · 2009
31. Treloar · 1975
32. Ward · 1993