Sources of inconsistency in mean mechanical response of abdominal aortic aneurysm tissue
Source abstract
Abstract
Introduction There is a striking difference in the reported mean response of abdominal aortic aneurysm tissue in academic literature depending on the type of tests (uniaxial vs biaxial) performed. In this paper, the hypothesis variability caused by differences in experimental protocols is explored using porcine aortic tissue as a substitute for aneurysmal tissue. Methods Nine samples of porcine aorta were created and both uniaxial and biaxial tests were performed. Three effects were investigated. (i) Effect of sample (non) preconditioning, (ii) effect of objective function used (normalised vs non-normalised), and (iii) effect of chosen procedure used for mean response calculation: constant averaging (CA) vs fit to averaged response (FAR) vs fit to all data (FAD). Both the overall shape of mean curve and mean initial stiffness were compared. Results (i) Non-preconditioning led to a much stiffer response, and initial stiffness was about three times higher for a non-preconditioned response based on uniaxial data compared to a preconditioned biaxial response. (ii) CA led to a much stiffer response compared to FAR and FAD procedures which gave similar results. (iii) Normalised objective function produced a mean response with six times lower initial stiffness and more pronounced nonlinearity compared to non-normalised objective function. Discussion It is possible to reproduce a mechanically inconsistent response purely by using the chosen experimental protocol. Non-preconditioned data from failure tests should be used for FE simulation of the elastic response of aneurysms. CA should not be used to obtain a mean response.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Elasticity and Material Modeling · Aortic aneurysm repair treatments · Probabilistic and Robust Engineering Design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Rupture rate of large abdominal aortic aneurysms in patients refusing or unfit for elective repair10.1001/jama.287.22.2968 ↗
2. Probabilistic noninvasive prediction of wall properties of abdominal aortic aneurysms using Bayesian regression10.1007/s10237-016-0801-6 ↗
3. Prediction of rupture risk in abdominal aortic aneurysm during observation: wall stress versus diameter10.1067/mva.2003.213 ↗
4. Biomechanical rupture risk assessment of abdominal aortic aneurysms: model complexity versus predictability of finite element simulations10.1016/j.ejvs.2010.04.003 ↗
5. Gere · 2013
6. Meta analysis on mortality of ruptured abdominal aortic aneurysms10.1016/j.ejvs.2007.11.019 ↗
7. A simple, effective and clinically applicable method to compute abdominal aortic aneurysm wall stress10.1016/j.jmbbm.2015.07.029 ↗
8. Impact of isotropic constitutive descriptions on the predicted peak wall stress in abdominal aortic aneurysms10.1016/j.medengphy.2018.01.002 ↗
9. Importance of initial stress for abdominal aortic aneurysm wall motion: dynamic MRI validated finite element analysis10.1016/j.jbiomech.2009.06.053 ↗
10. Applicability of simplified computational models in prediction of peak wall stress in abdominal aortic aneurysms
11. Comparison of methods used to measure the thickness of soft tissues and their influence on the evaluation of tensile stress10.1016/j.jbiomech.2013.05.003 ↗
12. The biaxial biomechanical behavior of abdominal aortic aneurysm tissue10.1007/s10439-014-1106-5 ↗
13. Determining the influence of calcification on the failure properties of abdominal aortic aneurysm (AAA) tissue10.1016/j.jmbbm.2014.11.005 ↗
14. Biomechanical rupture risk assessment of abdominal aortic aneurysms based on a novel probabilistic rupture risk index10.1098/rsif.2015.0852 ↗
15. Importance of material model in wall stress prediction in abdominal aortic aneurysms10.1016/j.medengphy.2013.01.008 ↗
16. Structure-based constitutive model can accurately predict planar biaxial properties of aortic wall tissue10.1016/j.actbio.2014.11.043 ↗
17. Toward a biomechanical tool to evaluate rupture potential of abdominal aortic aneurysm: identification of a finite strain constitutive model and evaluation of its applicability10.1016/S0021-9290(99)00201-8 ↗
18. Ex vivo biomechanical behavior of abdominal aortic aneurysm: assessment using a new mathematical model10.1007/BF02684226 ↗
19. The impact of model assumptions on results of computational mechanics in abdominal aortic aneurysm10.1016/j.jvs.2009.10.048 ↗
20. Measuring and modeling patient-specific distributions of material properties in abdominal aortic aneurysm wall10.1007/s10237-012-0436-1 ↗
21. Predictive capabilities of various constitutive models for arterial tissue10.1016/j.jmbbm.2017.11.035 ↗
22. Effect of testing conditions on the mechanical response of aortic tissues from planar biaxial experiments: loading protocol and specimen side10.1016/j.jmbbm.2020.103882 ↗
23. Effects of age on the elastic properties of the intraluminal thrombus and the thrombus-covered wall in abdominal aortic aneurysms: biaxial extension behaviour and material modelling10.1016/j.ejvs.2011.02.017 ↗
24. The effects of aneurysm on the biaxial mechanical behavior of human abdominal aorta10.1016/j.jbiomech.2005.03.003 ↗
25. Towards a noninvasive method for determination of patient-specific wall strength distribution in abdominal aortic aneurysms10.1007/s10439-006-9132-6 ↗
26. Effect of freezing on the passive mechanical properties of arterial samples10.4236/jbise.2010.37088 ↗
27. Editor's choice – European society for vascular surgery (ESVS) 2019 clinical practice guidelines on the management of abdominal aorto-iliac artery aneurysms10.1016/j.ejvs.2018.09.020 ↗
28. Zemánek · 2009