journal article·2021-11Open access

From in vitro evaluation of a finite element model of the spine to in silico comparison of spine instrumentations

Claudio Vergari, Mathilde Gaume, Sylvain Persohn, Lotfi Miladi, Wafa Skalli

Abstract

Growth-preserving spinal surgery suffer from high complications rate. A recent bipolar instrumentation using two anchoring points (thoracic and pelvic) showed lower rates, but its biomechanical behaviour has not been characterised yet. The aim of this work was to combine in vitro and in vivo data to improve and validate a finite element model (FEM) of the spine, and to apply it to compare bipolar and classical all-screws implants. Spinal segments were tested in vitro to measure range of motion (ROM). Thoracic segments were also tested with bipolar instrumentation to measure ROM and rod strain using a strain gage. A subject-specific FEM of the spine, pelvis and ribcage of an in vivo asymptomatic subject was built. Spinal segments were extracted from it to reproduce the in-vitro mechanical tests. Experimental and simulated ROM and rod strain were compared. Then, the full trunk FEM was used to compare bipolar and all-screws instrumentations. The FEM fell within 1° of the experimental corridors, and both in silico and in vitro instrumentation rods showed 0.01% maximal axial strain. Bipolar and all-screws constructs had similar maximal Von Mises stresses. This work represents a first step towards subject-specific simulation to evaluate spinal constructs for neuromuscular scoliosis in children.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Scoliosis diagnosis and treatment · Spinal Fractures and Fixation Techniques · Spine and Intervertebral Disc Pathology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Towards a validated patient-specific computational modeling framework to identify failure regions in traditional growing rods in patients with early onset scoliosis
2. Akbarnia · 2005 · 30
3. Balabaud · 2002 · 27
4. Complications of growing-rod treatment for early-onset scoliosis: analysis of one hundred and forty patients10.2106/JBJS.I.01471 ↗
5. What do we know about the biomechanics of the sacroiliac joint and of sacropelvic fixation? A literature review10.1016/j.medengphy.2019.10.009 ↗
6. Biomechanical properties of spinal ligaments and a histological study of the supraspinal ligament in traction10.1016/0021-9290(85)90202-7 ↗
7. Introduction des facettes articulaires dans une modélisation par éléments finis de la colonne vertébrale et du thorax scoliotique : aspects mécaniques
8. Biomechanical cadaver study of proximal fixation in a minimally invasive bipolar construct10.1007/s43390-019-00014-2 ↗
9. Gaume, M., Vergari, C., Khouri, N., Skalli, W., Glorion, C., Miladi, L., n.d. Minimally Invasive Surgery for Neuromuscular Scoliosis: Results and Complications at a Minimal Follow-Up of 5 Years. Spine (Phila. Pa. 1976).
10. 3D reconstruction of the spine from biplanar X-rays using parametric models based on transversal and longitudinal inferences10.1016/j.medengphy.2009.01.003 ↗
11. Coupled motions in human and porcine thoracic and lumbar spines10.1016/j.jbiomech.2017.11.034 ↗
12. Kuklo · 2008 · 33
13. 3D finite element simulation of Cotrel-Dubousset correction10.3109/10929080400006390 ↗
14. Intraoperative thraee-dimensional correction during rod rotation technique10.1097/BRS.0b013e31819413ec ↗
15. Lafon · 2010 · vol. 35 · 186
16. Differences on spinal curvature in standing position by gender, age and weight status using a noninvasive method10.1123/jab.27.2.143 ↗
17. Scoliosis and the impact in neuromuscular disease
18. Miladi · 2018 · vol. 43 · E968
19. Miladi · 1997 · 22
20. Treatment of neuromuscular scoliosis with posterior-only pedicle screw fixation10.1186/1749-799X-3-23 ↗
21. Experimental analysis of the lower cervical spine in flexion with a focus on facet tracking10.1016/j.jbiomech.2019.06.022 ↗
22. Mechanical properties of biomedical titanium alloys10.1016/S0921-5093(97)00806-X ↗
23. Hybrid multidirectional test method to evaluate spinal adjacent-level effects10.1016/j.clinbiomech.2006.08.006 ↗
24. Fracture mechanisms in Ti and Co–Cr growing rods and impact on clinical practice10.1016/j.jmbbm.2021.104620 ↗
25. Spinal fusion for pediatric neuromuscular scoliosis: national trends, complications, and in-hospital outcomes10.3171/2016.2.SPINE151377 ↗
26. Minimally invasive scoliosis surgery: a novel technique in patients with neuromuscular scoliosis10.1155/2015/481945 ↗
27. Sacral alar iliac (SAI) screws fail 75% less frequently than iliac screws in neuromuscular scoliosis10.1097/BPO.0000000000000720 ↗
28. Prevalence of complications in neuromuscular scoliosis surgery: a literature meta-analysis from the past 15 years10.1007/s00586-012-2542-2 ↗
29. Systematic review of the complications associated with magnetically controlled growing rods for the treatment of early onset scoliosis10.1007/s00586-018-5590-4 ↗
30. Evaluation of a patient-specific finite element model to simulate conservative treatment in adolescent idiopathic scoliosis10.1016/j.jspd.2014.06.014 ↗
31. In vitro analysis of the segmental flexibility of the thoracic spine10.1371/journal.pone.0177823 ↗